提交 b0d1f874 编写于 作者: J Jacob Pan 提交者: Joerg Roedel

iommu/vt-d: Add nested translation helper function

Nested translation mode is supported in VT-d 3.0 Spec.CH 3.8.
With PASID granular translation type set to 0x11b, translation
result from the first level(FL) also subject to a second level(SL)
page table translation. This mode is used for SVA virtualization,
where FL performs guest virtual to guest physical translation and
SL performs guest physical to host physical translation.

This patch adds a helper function for setting up nested translation
where second level comes from a domain and first level comes from
a guest PGD.
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-4-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>
上级 3aef9ca6
......@@ -296,31 +296,6 @@ static inline void context_clear_entry(struct context_entry *context)
static struct dmar_domain *si_domain;
static int hw_pass_through = 1;
/* si_domain contains mulitple devices */
#define DOMAIN_FLAG_STATIC_IDENTITY BIT(0)
/*
* This is a DMA domain allocated through the iommu domain allocation
* interface. But one or more devices belonging to this domain have
* been chosen to use a private domain. We should avoid to use the
* map/unmap/iova_to_phys APIs on it.
*/
#define DOMAIN_FLAG_LOSE_CHILDREN BIT(1)
/*
* When VT-d works in the scalable mode, it allows DMA translation to
* happen through either first level or second level page table. This
* bit marks that the DMA translation for the domain goes through the
* first level page table, otherwise, it goes through the second level.
*/
#define DOMAIN_FLAG_USE_FIRST_LEVEL BIT(2)
/*
* Domain represents a virtual machine which demands iommu nested
* translation mode support.
*/
#define DOMAIN_FLAG_NESTING_MODE BIT(3)
#define for_each_domain_iommu(idx, domain) \
for (idx = 0; idx < g_num_of_iommus; idx++) \
if (domain->iommu_refcnt[idx])
......
......@@ -359,6 +359,16 @@ pasid_set_flpm(struct pasid_entry *pe, u64 value)
pasid_set_bits(&pe->val[2], GENMASK_ULL(3, 2), value << 2);
}
/*
* Setup the Extended Access Flag Enable (EAFE) field (Bit 135)
* of a scalable mode PASID entry.
*/
static inline void
pasid_set_eafe(struct pasid_entry *pe)
{
pasid_set_bits(&pe->val[2], 1 << 7, 1 << 7);
}
static void
pasid_cache_invalidation_with_pasid(struct intel_iommu *iommu,
u16 did, int pasid)
......@@ -492,7 +502,7 @@ int intel_pasid_setup_first_level(struct intel_iommu *iommu,
pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
/* Setup Present and PASID Granular Transfer Type: */
pasid_set_translation_type(pte, 1);
pasid_set_translation_type(pte, PASID_ENTRY_PGTT_FL_ONLY);
pasid_set_present(pte);
pasid_flush_caches(iommu, pte, pasid, did);
......@@ -561,7 +571,7 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu,
pasid_set_domain_id(pte, did);
pasid_set_slptr(pte, pgd_val);
pasid_set_address_width(pte, agaw);
pasid_set_translation_type(pte, 2);
pasid_set_translation_type(pte, PASID_ENTRY_PGTT_SL_ONLY);
pasid_set_fault_enable(pte);
pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
......@@ -595,7 +605,7 @@ int intel_pasid_setup_pass_through(struct intel_iommu *iommu,
pasid_clear_entry(pte);
pasid_set_domain_id(pte, did);
pasid_set_address_width(pte, iommu->agaw);
pasid_set_translation_type(pte, 4);
pasid_set_translation_type(pte, PASID_ENTRY_PGTT_PT);
pasid_set_fault_enable(pte);
pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
......@@ -609,3 +619,161 @@ int intel_pasid_setup_pass_through(struct intel_iommu *iommu,
return 0;
}
static int
intel_pasid_setup_bind_data(struct intel_iommu *iommu, struct pasid_entry *pte,
struct iommu_gpasid_bind_data_vtd *pasid_data)
{
/*
* Not all guest PASID table entry fields are passed down during bind,
* here we only set up the ones that are dependent on guest settings.
* Execution related bits such as NXE, SMEP are not supported.
* Other fields, such as snoop related, are set based on host needs
* regardless of guest settings.
*/
if (pasid_data->flags & IOMMU_SVA_VTD_GPASID_SRE) {
if (!ecap_srs(iommu->ecap)) {
pr_err_ratelimited("No supervisor request support on %s\n",
iommu->name);
return -EINVAL;
}
pasid_set_sre(pte);
}
if (pasid_data->flags & IOMMU_SVA_VTD_GPASID_EAFE) {
if (!ecap_eafs(iommu->ecap)) {
pr_err_ratelimited("No extended access flag support on %s\n",
iommu->name);
return -EINVAL;
}
pasid_set_eafe(pte);
}
/*
* Memory type is only applicable to devices inside processor coherent
* domain. Will add MTS support once coherent devices are available.
*/
if (pasid_data->flags & IOMMU_SVA_VTD_GPASID_MTS_MASK) {
pr_warn_ratelimited("No memory type support %s\n",
iommu->name);
return -EINVAL;
}
return 0;
}
/**
* intel_pasid_setup_nested() - Set up PASID entry for nested translation.
* This could be used for guest shared virtual address. In this case, the
* first level page tables are used for GVA-GPA translation in the guest,
* second level page tables are used for GPA-HPA translation.
*
* @iommu: IOMMU which the device belong to
* @dev: Device to be set up for translation
* @gpgd: FLPTPTR: First Level Page translation pointer in GPA
* @pasid: PASID to be programmed in the device PASID table
* @pasid_data: Additional PASID info from the guest bind request
* @domain: Domain info for setting up second level page tables
* @addr_width: Address width of the first level (guest)
*/
int intel_pasid_setup_nested(struct intel_iommu *iommu, struct device *dev,
pgd_t *gpgd, int pasid,
struct iommu_gpasid_bind_data_vtd *pasid_data,
struct dmar_domain *domain, int addr_width)
{
struct pasid_entry *pte;
struct dma_pte *pgd;
int ret = 0;
u64 pgd_val;
int agaw;
u16 did;
if (!ecap_nest(iommu->ecap)) {
pr_err_ratelimited("IOMMU: %s: No nested translation support\n",
iommu->name);
return -EINVAL;
}
if (!(domain->flags & DOMAIN_FLAG_NESTING_MODE)) {
pr_err_ratelimited("Domain is not in nesting mode, %x\n",
domain->flags);
return -EINVAL;
}
pte = intel_pasid_get_entry(dev, pasid);
if (WARN_ON(!pte))
return -EINVAL;
/*
* Caller must ensure PASID entry is not in use, i.e. not bind the
* same PASID to the same device twice.
*/
if (pasid_pte_is_present(pte))
return -EBUSY;
pasid_clear_entry(pte);
/* Sanity checking performed by caller to make sure address
* width matching in two dimensions:
* 1. CPU vs. IOMMU
* 2. Guest vs. Host.
*/
switch (addr_width) {
#ifdef CONFIG_X86
case ADDR_WIDTH_5LEVEL:
if (!cpu_feature_enabled(X86_FEATURE_LA57) ||
!cap_5lp_support(iommu->cap)) {
dev_err_ratelimited(dev,
"5-level paging not supported\n");
return -EINVAL;
}
pasid_set_flpm(pte, 1);
break;
#endif
case ADDR_WIDTH_4LEVEL:
pasid_set_flpm(pte, 0);
break;
default:
dev_err_ratelimited(dev, "Invalid guest address width %d\n",
addr_width);
return -EINVAL;
}
/* First level PGD is in GPA, must be supported by the second level */
if ((unsigned long long)gpgd > domain->max_addr) {
dev_err_ratelimited(dev,
"Guest PGD %llx not supported, max %llx\n",
(unsigned long long)gpgd, domain->max_addr);
return -EINVAL;
}
pasid_set_flptr(pte, (u64)gpgd);
ret = intel_pasid_setup_bind_data(iommu, pte, pasid_data);
if (ret)
return ret;
/* Setup the second level based on the given domain */
pgd = domain->pgd;
agaw = iommu_skip_agaw(domain, iommu, &pgd);
if (agaw < 0) {
dev_err_ratelimited(dev, "Invalid domain page table\n");
return -EINVAL;
}
pgd_val = virt_to_phys(pgd);
pasid_set_slptr(pte, pgd_val);
pasid_set_fault_enable(pte);
did = domain->iommu_did[iommu->seq_id];
pasid_set_domain_id(pte, did);
pasid_set_address_width(pte, agaw);
pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
pasid_set_translation_type(pte, PASID_ENTRY_PGTT_NESTED);
pasid_set_present(pte);
pasid_flush_caches(iommu, pte, pasid, did);
return ret;
}
......@@ -36,6 +36,7 @@
* to vmalloc or even module mappings.
*/
#define PASID_FLAG_SUPERVISOR_MODE BIT(0)
#define PASID_FLAG_NESTED BIT(1)
/*
* The PASID_FLAG_FL5LP flag Indicates using 5-level paging for first-
......@@ -51,6 +52,11 @@ struct pasid_entry {
u64 val[8];
};
#define PASID_ENTRY_PGTT_FL_ONLY (1)
#define PASID_ENTRY_PGTT_SL_ONLY (2)
#define PASID_ENTRY_PGTT_NESTED (3)
#define PASID_ENTRY_PGTT_PT (4)
/* The representative of a PASID table */
struct pasid_table {
void *table; /* pasid table pointer */
......@@ -99,6 +105,10 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu,
int intel_pasid_setup_pass_through(struct intel_iommu *iommu,
struct dmar_domain *domain,
struct device *dev, int pasid);
int intel_pasid_setup_nested(struct intel_iommu *iommu,
struct device *dev, pgd_t *pgd, int pasid,
struct iommu_gpasid_bind_data_vtd *pasid_data,
struct dmar_domain *domain, int addr_width);
void intel_pasid_tear_down_entry(struct intel_iommu *iommu,
struct device *dev, int pasid);
......
......@@ -42,6 +42,9 @@
#define DMA_FL_PTE_PRESENT BIT_ULL(0)
#define DMA_FL_PTE_XD BIT_ULL(63)
#define ADDR_WIDTH_5LEVEL (57)
#define ADDR_WIDTH_4LEVEL (48)
#define CONTEXT_TT_MULTI_LEVEL 0
#define CONTEXT_TT_DEV_IOTLB 1
#define CONTEXT_TT_PASS_THROUGH 2
......@@ -480,6 +483,23 @@ struct context_entry {
u64 hi;
};
/* si_domain contains mulitple devices */
#define DOMAIN_FLAG_STATIC_IDENTITY BIT(0)
/*
* When VT-d works in the scalable mode, it allows DMA translation to
* happen through either first level or second level page table. This
* bit marks that the DMA translation for the domain goes through the
* first level page table, otherwise, it goes through the second level.
*/
#define DOMAIN_FLAG_USE_FIRST_LEVEL BIT(1)
/*
* Domain represents a virtual machine which demands iommu nested
* translation mode support.
*/
#define DOMAIN_FLAG_NESTING_MODE BIT(2)
struct dmar_domain {
int nid; /* node id */
......
......@@ -285,6 +285,11 @@ struct iommu_gpasid_bind_data_vtd {
__u32 emt;
};
#define IOMMU_SVA_VTD_GPASID_MTS_MASK (IOMMU_SVA_VTD_GPASID_CD | \
IOMMU_SVA_VTD_GPASID_EMTE | \
IOMMU_SVA_VTD_GPASID_PCD | \
IOMMU_SVA_VTD_GPASID_PWT)
/**
* struct iommu_gpasid_bind_data - Information about device and guest PASID binding
* @version: Version of this data structure
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册