net: dsa: mv88e6xxx: factorize GLOBAL_MONITOR_CONTROL setup

All switch drivers configure the GLOBAL_MONITOR_CONTROL register with
slightly changes.

Assume the setup of the upstream port, and configure it as the port to
which ingress and egress and ARP monitor frames are to be sent.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/dsa/mv88e6123.c

@@ -54,20 +54,6 @@ static const char *mv88e6123_drv_probe(struct device *dsa_dev,
 static int mv88e6123_setup_global(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-	u32 upstream_port = dsa_upstream_port(ds);
-	int ret;
-	u32 reg;
-
-	/* Configure the upstream port, and configure the upstream
-	 * port as the port to which ingress and egress monitor frames
-	 * are to be sent.
-	 */
-	reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
-	ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
-	if (ret)
-		return ret;
 
 	/* Disable remote management for now, and set the switch's
 	 * DSA device number.

drivers/net/dsa/mv88e6131.c

@@ -61,20 +61,7 @@ static const char *mv88e6131_drv_probe(struct device *dsa_dev,
 static int mv88e6131_setup_global(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-	u32 upstream_port = dsa_upstream_port(ds);
 	int ret;
-	u32 reg;
-
-	/* Disable ARP mirroring, and configure the upstream port as
-	 * the port to which ingress and egress monitor frames are to
-	 * be sent.
-	 */
-	reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
-		GLOBAL_MONITOR_CONTROL_ARP_DISABLED;
-	ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
-	if (ret)
-		return ret;
 
 	/* Disable cascade port functionality unless this device
 	 * is used in a cascade configuration, and set the switch's

drivers/net/dsa/mv88e6171.c

@@ -61,21 +61,6 @@ static const char *mv88e6171_drv_probe(struct device *dsa_dev,
 static int mv88e6171_setup_global(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-	u32 upstream_port = dsa_upstream_port(ds);
-	int ret;
-	u32 reg;
-
-	/* Configure the upstream port, and configure the upstream
-	 * port as the port to which ingress and egress monitor frames
-	 * are to be sent.
-	 */
-	reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_MIRROR_SHIFT;
-	ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
-	if (ret)
-		return ret;
 
 	/* Disable remote management for now, and set the switch's
 	 * DSA device number.

drivers/net/dsa/mv88e6352.c

@@ -80,20 +80,6 @@ static const char *mv88e6352_drv_probe(struct device *dsa_dev,
 static int mv88e6352_setup_global(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-	u32 upstream_port = dsa_upstream_port(ds);
-	int ret;
-	u32 reg;
-
-	/* Configure the upstream port, and configure the upstream
-	 * port as the port to which ingress and egress monitor frames
-	 * are to be sent.
-	 */
-	reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
-	ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
-	if (ret)
-		return ret;
 
 	/* Disable remote management for now, and set the switch's
 	 * DSA device number.

drivers/net/dsa/mv88e6xxx.c

@@ -2922,6 +2922,8 @@ int mv88e6xxx_setup_ports(struct dsa_switch *ds)
 
 static int mv88e6xxx_setup_global(struct mv88e6xxx_priv_state *ps)
 {
+	struct dsa_switch *ds = ps->ds;
+	u32 upstream_port = dsa_upstream_port(ds);
 	u16 reg;
 	int err;
 	int i;
@@ -2938,6 +2940,16 @@ static int mv88e6xxx_setup_global(struct mv88e6xxx_priv_state *ps)
 	if (err)
 		return err;
 
+	/* Configure the upstream port, and configure it as the port to which
+	 * ingress and egress and ARP monitor frames are to be sent.
+	 */
+	reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
+		upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
+		upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
+	err = _mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
+	if (err)
+		return err;
+
 	/* Set the default address aging time to 5 minutes, and
 	 * enable address learn messages to be sent to all message
 	 * ports.