提交 b06eb017 编写于 作者: C Christian Ruppert 提交者: Thomas Gleixner

irqchip: Add TB10x interrupt controller driver

The SOC interrupt controller driver for the Abilis Systems TB10x series of
SOCs based on ARC700 CPUs.
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NPierrick Hascoet <pierrick.hascoet@abilis.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: devicetree-discuss@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1372177797-9458-1-git-send-email-christian.ruppert@abilis.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
上级 fbab62c5
TB10x Top Level Interrupt Controller
====================================
The Abilis TB10x SOC contains a custom interrupt controller. It performs
one-to-one mapping of external interrupt sources to CPU interrupts and
provides support for reconfigurable trigger modes.
Required properties
-------------------
- compatible: Should be "abilis,tb10x-ictl"
- reg: specifies physical base address and size of register range.
- interrupt-congroller: Identifies the node as an interrupt controller.
- #interrupt cells: Specifies the number of cells used to encode an interrupt
source connected to this controller. The value shall be 2.
- interrupt-parent: Specifies the parent interrupt controller.
- interrupts: Specifies the list of interrupt lines which are handled by
the interrupt controller in the parent controller's notation. Interrupts
are mapped one-to-one to parent interrupts.
Example
-------
intc: interrupt-controller { /* Parent interrupt controller */
interrupt-controller;
#interrupt-cells = <1>; /* For example below */
/* ... */
};
tb10x_ictl: pic@2000 { /* TB10x interrupt controller */
compatible = "abilis,tb10x-ictl";
reg = <0x2000 0x20>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31>;
};
......@@ -38,6 +38,11 @@ config RENESAS_IRQC
bool
select IRQ_DOMAIN
config TB10X_IRQC
bool
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
config VERSATILE_FPGA_IRQ
bool
select IRQ_DOMAIN
......
......@@ -17,3 +17,4 @@ obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
/*
* Abilis Systems interrupt controller driver
*
* Copyright (C) Abilis Systems 2012
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include "irqchip.h"
#define AB_IRQCTL_INT_ENABLE 0x00
#define AB_IRQCTL_INT_STATUS 0x04
#define AB_IRQCTL_SRC_MODE 0x08
#define AB_IRQCTL_SRC_POLARITY 0x0C
#define AB_IRQCTL_INT_MODE 0x10
#define AB_IRQCTL_INT_POLARITY 0x14
#define AB_IRQCTL_INT_FORCE 0x18
#define AB_IRQCTL_MAXIRQ 32
static inline void ab_irqctl_writereg(struct irq_chip_generic *gc, u32 reg,
u32 val)
{
irq_reg_writel(val, gc->reg_base + reg);
}
static inline u32 ab_irqctl_readreg(struct irq_chip_generic *gc, u32 reg)
{
return irq_reg_readl(gc->reg_base + reg);
}
static int tb10x_irq_set_type(struct irq_data *data, unsigned int flow_type)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
uint32_t im, mod, pol;
im = data->mask;
irq_gc_lock(gc);
mod = ab_irqctl_readreg(gc, AB_IRQCTL_SRC_MODE) | im;
pol = ab_irqctl_readreg(gc, AB_IRQCTL_SRC_POLARITY) | im;
switch (flow_type & IRQF_TRIGGER_MASK) {
case IRQ_TYPE_EDGE_FALLING:
pol ^= im;
break;
case IRQ_TYPE_LEVEL_HIGH:
mod ^= im;
break;
case IRQ_TYPE_NONE:
flow_type = IRQ_TYPE_LEVEL_LOW;
case IRQ_TYPE_LEVEL_LOW:
mod ^= im;
pol ^= im;
break;
case IRQ_TYPE_EDGE_RISING:
break;
default:
irq_gc_unlock(gc);
pr_err("%s: Cannot assign multiple trigger modes to IRQ %d.\n",
__func__, data->irq);
return -EBADR;
}
irqd_set_trigger_type(data, flow_type);
irq_setup_alt_chip(data, flow_type);
ab_irqctl_writereg(gc, AB_IRQCTL_SRC_MODE, mod);
ab_irqctl_writereg(gc, AB_IRQCTL_SRC_POLARITY, pol);
ab_irqctl_writereg(gc, AB_IRQCTL_INT_STATUS, im);
irq_gc_unlock(gc);
return IRQ_SET_MASK_OK;
}
static void tb10x_irq_cascade(unsigned int irq, struct irq_desc *desc)
{
struct irq_domain *domain = irq_desc_get_handler_data(desc);
generic_handle_irq(irq_find_mapping(domain, irq));
}
static int __init of_tb10x_init_irq(struct device_node *ictl,
struct device_node *parent)
{
int i, ret, nrirqs = of_irq_count(ictl);
struct resource mem;
struct irq_chip_generic *gc;
struct irq_domain *domain;
void __iomem *reg_base;
if (of_address_to_resource(ictl, 0, &mem)) {
pr_err("%s: No registers declared in DeviceTree.\n",
ictl->name);
return -EINVAL;
}
if (!request_mem_region(mem.start, resource_size(&mem),
ictl->name)) {
pr_err("%s: Request mem region failed.\n", ictl->name);
return -EBUSY;
}
reg_base = ioremap(mem.start, resource_size(&mem));
if (!reg_base) {
ret = -EBUSY;
pr_err("%s: ioremap failed.\n", ictl->name);
goto ioremap_fail;
}
domain = irq_domain_add_linear(ictl, AB_IRQCTL_MAXIRQ,
&irq_generic_chip_ops, NULL);
if (!domain) {
ret = -ENOMEM;
pr_err("%s: Could not register interrupt domain.\n",
ictl->name);
goto irq_domain_add_fail;
}
ret = irq_alloc_domain_generic_chips(domain, AB_IRQCTL_MAXIRQ,
2, ictl->name, handle_level_irq,
IRQ_NOREQUEST, IRQ_NOPROBE,
IRQ_GC_INIT_MASK_CACHE);
if (ret) {
pr_err("%s: Could not allocate generic interrupt chip.\n",
ictl->name);
goto gc_alloc_fail;
}
gc = domain->gc->gc[0];
gc->reg_base = reg_base;
gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
gc->chip_types[0].chip.irq_set_type = tb10x_irq_set_type;
gc->chip_types[0].regs.mask = AB_IRQCTL_INT_ENABLE;
gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
gc->chip_types[1].chip.name = gc->chip_types[0].chip.name;
gc->chip_types[1].chip.irq_ack = irq_gc_ack_set_bit;
gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit;
gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit;
gc->chip_types[1].chip.irq_set_type = tb10x_irq_set_type;
gc->chip_types[1].regs.ack = AB_IRQCTL_INT_STATUS;
gc->chip_types[1].regs.mask = AB_IRQCTL_INT_ENABLE;
gc->chip_types[1].handler = handle_edge_irq;
for (i = 0; i < nrirqs; i++) {
unsigned int irq = irq_of_parse_and_map(ictl, i);
irq_set_handler_data(irq, domain);
irq_set_chained_handler(irq, tb10x_irq_cascade);
}
ab_irqctl_writereg(gc, AB_IRQCTL_INT_ENABLE, 0);
ab_irqctl_writereg(gc, AB_IRQCTL_INT_MODE, 0);
ab_irqctl_writereg(gc, AB_IRQCTL_INT_POLARITY, 0);
ab_irqctl_writereg(gc, AB_IRQCTL_INT_STATUS, ~0UL);
return 0;
gc_alloc_fail:
irq_domain_remove(domain);
irq_domain_add_fail:
iounmap(reg_base);
ioremap_fail:
release_mem_region(mem.start, resource_size(&mem));
return ret;
}
IRQCHIP_DECLARE(tb10x_intc, "abilis,tb10x-ictl", of_tb10x_init_irq);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册