提交 b00adf76 编写于 作者: M Mark Brown

ASoC: Enhance default WM8958 microphone detection

Actively manage the detection rate for microphones with WM8958, providing
improved power consumption and maximising the benefit from the hardware
debounce.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 500fa30e
......@@ -53,6 +53,56 @@ static int wm8994_retune_mobile_base[] = {
WM8994_AIF2_EQ_GAINS_1,
};
static void wm8958_default_micdet(u16 status, void *data);
static const struct {
int sysclk;
bool idle;
int start;
int rate;
} wm8958_micd_rates[] = {
{ 32768, true, 1, 4 },
{ 32768, false, 1, 1 },
{ 44100 * 256, true, 7, 6 },
{ 44100 * 256, false, 7, 6 },
};
static void wm8958_micd_set_rate(struct snd_soc_codec *codec)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
int best, i, sysclk, val;
bool idle;
if (wm8994->jack_cb != wm8958_default_micdet)
return;
idle = !wm8994->jack_mic;
sysclk = snd_soc_read(codec, WM8994_CLOCKING_1);
if (sysclk & WM8994_SYSCLK_SRC)
sysclk = wm8994->aifclk[1];
else
sysclk = wm8994->aifclk[0];
best = 0;
for (i = 0; i < ARRAY_SIZE(wm8958_micd_rates); i++) {
if (wm8958_micd_rates[i].idle != idle)
continue;
if (abs(wm8958_micd_rates[i].sysclk - sysclk) <
abs(wm8958_micd_rates[best].sysclk - sysclk))
best = i;
else if (wm8958_micd_rates[best].idle != idle)
best = i;
}
val = wm8958_micd_rates[best].start << WM8958_MICD_BIAS_STARTTIME_SHIFT
| wm8958_micd_rates[best].rate << WM8958_MICD_RATE_SHIFT;
snd_soc_update_bits(codec, WM8958_MIC_DETECT_1,
WM8958_MICD_BIAS_STARTTIME_MASK |
WM8958_MICD_RATE_MASK, val);
}
static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
......@@ -221,8 +271,10 @@ static int configure_clock(struct snd_soc_codec *codec)
*/
/* If they're equal it doesn't matter which is used */
if (wm8994->aifclk[0] == wm8994->aifclk[1])
if (wm8994->aifclk[0] == wm8994->aifclk[1]) {
wm8958_micd_set_rate(codec);
return 0;
}
if (wm8994->aifclk[0] < wm8994->aifclk[1])
new = WM8994_SYSCLK_SRC;
......@@ -236,6 +288,8 @@ static int configure_clock(struct snd_soc_codec *codec)
snd_soc_dapm_sync(&codec->dapm);
wm8958_micd_set_rate(codec);
return 0;
}
......@@ -2987,21 +3041,56 @@ static void wm8958_default_micdet(u16 status, void *data)
{
struct snd_soc_codec *codec = data;
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
int report = 0;
/* If nothing present then clear our statuses */
if (!(status & WM8958_MICD_STS))
goto done;
if (!(status & WM8958_MICD_STS)) {
dev_dbg(codec->dev, "Detected open circuit\n");
wm8994->jack_mic = false;
wm8994->detecting = true;
wm8958_micd_set_rate(codec);
report = SND_JACK_MICROPHONE;
snd_soc_jack_report(wm8994->micdet[0].jack, 0,
SND_JACK_BTN_0 | SND_JACK_HEADSET);
return;
}
/* Everything else is buttons; just assign slots */
if (status & 0x1c)
report |= SND_JACK_BTN_0;
/* If the measurement is showing a high impedence we've got a
* microphone.
*/
if (wm8994->detecting && (status & 0x600)) {
dev_dbg(codec->dev, "Detected microphone\n");
wm8994->detecting = false;
wm8994->jack_mic = true;
wm8958_micd_set_rate(codec);
snd_soc_jack_report(wm8994->micdet[0].jack, SND_JACK_HEADSET,
SND_JACK_HEADSET);
}
done:
snd_soc_jack_report(wm8994->micdet[0].jack, report,
SND_JACK_BTN_0 | SND_JACK_MICROPHONE);
if (wm8994->detecting && status & 0x4) {
dev_dbg(codec->dev, "Detected headphone\n");
wm8994->detecting = false;
wm8958_micd_set_rate(codec);
snd_soc_jack_report(wm8994->micdet[0].jack, SND_JACK_HEADPHONE,
SND_JACK_HEADSET);
}
/* Report short circuit as a button */
if (wm8994->jack_mic) {
if (status & 0x4)
snd_soc_jack_report(wm8994->micdet[0].jack,
SND_JACK_BTN_0, SND_JACK_BTN_0);
else
snd_soc_jack_report(wm8994->micdet[0].jack,
0, SND_JACK_BTN_0);
}
}
/**
......@@ -3047,6 +3136,15 @@ int wm8958_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
wm8994->jack_cb = cb;
wm8994->jack_cb_data = cb_data;
wm8994->detecting = true;
wm8994->jack_mic = false;
wm8958_micd_set_rate(codec);
/* Detect microphones and short circuits */
snd_soc_update_bits(codec, WM8958_MIC_DETECT_2,
WM8958_MICD_LVL_SEL_MASK, 0x41);
snd_soc_update_bits(codec, WM8958_MIC_DETECT_1,
WM8958_MICD_ENA, WM8958_MICD_ENA);
} else {
......
......@@ -126,6 +126,8 @@ struct wm8994_priv {
struct soc_enum enh_eq_enum;
struct wm8994_micdet micdet[2];
bool detecting;
bool jack_mic;
wm8958_micdet_cb jack_cb;
void *jack_cb_data;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册