提交 aee1dc73 编写于 作者: J Jason Jin 提交者: Kumar Gala

[POWERPC] Update booting-without-of for Freescale PCIe MSI

Binding document adding for Freescale PCIe MSI support.
Signed-off-by: NJason Jin <Jason.jin@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 0723abd0
......@@ -57,7 +57,10 @@ Table of Contents
n) 4xx/Axon EMAC ethernet nodes
o) Xilinx IP cores
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
q) USB EHCI controllers
r) Freescale Display Interface Unit
s) Freescale on board FPGA
t) Freescael MSI interrupt controller
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
......@@ -2870,6 +2873,44 @@ platforms are moved over to use the flattened-device-tree model.
reg = <0xe8000000 32>;
};
t) Freescale MSI interrupt controller
Reguired properities:
- compatible : compatible list, contains 2 entries,
first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
the parent type.
- reg : should contain the address and the length of the shared message
interrupt register set.
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
optional, without this, all the 256 MSI interrupts can be used.
- interrupts : each one of the interrupts here is one entry per 32 MSIs,
and routed to the host interrupt controller. the interrupts should
be set as edge sensitive.
- interrupt-parent: the phandle for the interrupt controller
that services interrupts for this device. for 83xx cpu, the interrupts
are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
to MPIC.
Example
msi@41600 {
compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册