Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 ad530771 编写于 作者: D Dmitry Torokhov
浏览文件
操作

Input: psmouse - fix comment style 

The module was using non-standard comment style with comment blocks often
starting at the very beginning of a line instead of being aligned with the
code. Let's switch to standard formatting.
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NMarcin Sochacki <msochacki+kernel@gmail.com>
Tested-by: NTill <till2.schaefer@uni-dortmund.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
上级 0a88d607
隐藏空白更改
内联 并排
Showing with 124 addition and 155 deletion
drivers/input/mouse/psmouse-base.c
浏览文件 @ ad530771
......@@ -129,7 +129,6 @@ struct psmouse_protocol {
* psmouse_process_byte() analyzes the PS/2 data stream and reports
* relevant events to the input module once full packet has arrived.
*/
psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
......@@ -219,7 +218,6 @@ void psmouse_queue_work(struct psmouse *psmouse, struct delayed_work *work,
/*
* __psmouse_set_state() sets new psmouse state and resets all flags.
*/
static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
{
psmouse->state = new_state;
......@@ -228,13 +226,11 @@ static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_sta
psmouse->last = jiffies;
}
/*
* psmouse_set_state() sets new psmouse state and resets all flags and
* counters while holding serio lock so fighting with interrupt handler
* is not a concern.
*/
void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
{
serio_pause_rx(psmouse->ps2dev.serio);
......@@ -246,7 +242,6 @@ void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
* psmouse_handle_byte() processes one byte of the input data stream
* by calling corresponding protocol handler.
*/
static int psmouse_handle_byte(struct psmouse *psmouse)
{
psmouse_ret_t rc = psmouse->protocol_handler(psmouse);
......@@ -289,7 +284,6 @@ static int psmouse_handle_byte(struct psmouse *psmouse)
* psmouse_interrupt() handles incoming characters, either passing them
* for normal processing or gathering them as command response.
*/
static irqreturn_t psmouse_interrupt(struct serio *serio,
unsigned char data, unsigned int flags)
{
......@@ -332,9 +326,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
}
psmouse->packet[psmouse->pktcnt++] = data;
/*
* Check if this is a new device announcement (0xAA 0x00)
*/
/* Check if this is a new device announcement (0xAA 0x00) */
if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
if (psmouse->pktcnt == 1) {
psmouse->last = jiffies;
......@@ -348,9 +341,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
serio_reconnect(serio);
goto out;
}
/*
* Not a new device, try processing first byte normally
*/
/* Not a new device, try processing first byte normally */
psmouse->pktcnt = 1;
if (psmouse_handle_byte(psmouse))
goto out;
......@@ -358,9 +350,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
psmouse->packet[psmouse->pktcnt++] = data;
}
/*
* See if we need to force resync because mouse was idle for too long
*/
/*
* See if we need to force resync because mouse was idle for
* too long.
*/
if (psmouse->state == PSMOUSE_ACTIVATED &&
psmouse->pktcnt == 1 && psmouse->resync_time &&
time_after(jiffies, psmouse->last + psmouse->resync_time * HZ)) {
......@@ -377,7 +370,6 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
return IRQ_HANDLED;
}
/*
* psmouse_sliced_command() sends an extended PS/2 command to the mouse
* using sliced syntax, understood by advanced devices, such as Logitech
......@@ -401,7 +393,6 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command)
return 0;
}
/*
* psmouse_reset() resets the mouse into power-on state.
*/
......@@ -421,7 +412,6 @@ int psmouse_reset(struct psmouse *psmouse)
/*
* Here we set the mouse resolution.
*/
void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution)
{
static const unsigned char params[] = { 0, 1, 2, 2, 3 };
......@@ -438,7 +428,6 @@ void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution)
/*
* Here we set the mouse report rate.
*/
static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate)
{
static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 };
......@@ -454,7 +443,6 @@ static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate)
/*
* Here we set the mouse scaling.
*/
static void psmouse_set_scale(struct psmouse *psmouse, enum psmouse_scale scale)
{
ps2_command(&psmouse->ps2dev, NULL,
......@@ -465,7 +453,6 @@ static void psmouse_set_scale(struct psmouse *psmouse, enum psmouse_scale scale)
/*
* psmouse_poll() - default poll handler. Everyone except for ALPS uses it.
*/
static int psmouse_poll(struct psmouse *psmouse)
{
return ps2_command(&psmouse->ps2dev, psmouse->packet,
......@@ -599,7 +586,7 @@ static int im_explorer_detect(struct psmouse *psmouse, bool set_properties)
if (param[0] != 4)
return -1;
/* Magic to enable horizontal scrolling on IntelliMouse 4.0 */
/* Magic to enable horizontal scrolling on IntelliMouse 4.0 */
param[0] = 200;
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE);
param[0] = 80;
......@@ -669,10 +656,10 @@ static int ps2bare_detect(struct psmouse *psmouse, bool set_properties)
if (!psmouse->name)
psmouse->name = "Mouse";
/*
* We have no way of figuring true number of buttons so let's
* assume that the device has 3.
*/
/*
* We have no way of figuring true number of buttons so let's
* assume that the device has 3.
*/
__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
}
......@@ -700,7 +687,6 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties)
* Apply default settings to the psmouse structure. Most of them will
* be overridden by individual protocol initialization routines.
*/
static void psmouse_apply_defaults(struct psmouse *psmouse)
{
struct input_dev *input_dev = psmouse->dev;
......@@ -753,13 +739,15 @@ static int psmouse_do_detect(int (*detect)(struct psmouse *psmouse,
* psmouse_extensions() probes for any extensions to the basic PS/2 protocol
* the mouse may have.
*/
static int psmouse_extensions(struct psmouse *psmouse,
unsigned int max_proto, bool set_properties)
{
bool synaptics_hardware = false;
/* Always check for focaltech, this is safe as it uses pnp-id matching */
/*
* Always check for focaltech, this is safe as it uses pnp-id
* matching.
*/
if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) {
if (max_proto > PSMOUSE_IMEX) {
if (!set_properties || focaltech_init(psmouse) == 0) {
......@@ -777,10 +765,10 @@ static int psmouse_extensions(struct psmouse *psmouse,
}
}
/*
* We always check for lifebook because it does not disturb mouse
* (it only checks DMI information).
*/
/*
* We always check for LifeBook because it does not disturb mouse
* (it only checks DMI information).
*/
if (psmouse_do_detect(lifebook_detect, psmouse, set_properties) == 0) {
if (max_proto > PSMOUSE_IMEX) {
if (!set_properties || lifebook_init(psmouse) == 0)
......@@ -795,53 +783,57 @@ static int psmouse_extensions(struct psmouse *psmouse,
}
}
/*
* Try Kensington ThinkingMouse (we try first, because synaptics probe
* upsets the thinkingmouse).
*/
/*
* Try Kensington ThinkingMouse (we try first, because Synaptics
* probe upsets the ThinkingMouse).
*/
if (max_proto > PSMOUSE_IMEX &&
psmouse_do_detect(thinking_detect, psmouse, set_properties) == 0) {
return PSMOUSE_THINKPS;
}
/*
* Try Synaptics TouchPad. Note that probing is done even if Synaptics protocol
* support is disabled in config - we need to know if it is synaptics so we
* can reset it properly after probing for intellimouse.
*/
/*
* Try Synaptics TouchPad. Note that probing is done even if
* Synaptics protocol support is disabled in config - we need to
* know if it is Synaptics so we can reset it properly after
* probing for IntelliMouse.
*/
if (max_proto > PSMOUSE_PS2 &&
psmouse_do_detect(synaptics_detect, psmouse, set_properties) == 0) {
synaptics_hardware = true;
if (max_proto > PSMOUSE_IMEX) {
/*
* Try activating protocol, but check if support is enabled first, since
* we try detecting Synaptics even when protocol is disabled.
*/
/*
* Try activating protocol, but check if support is
* enabled first, since we try detecting Synaptics
* even when protocol is disabled.
*/
if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) &&
(!set_properties || synaptics_init(psmouse) == 0)) {
return PSMOUSE_SYNAPTICS;
}
/*
* Some Synaptics touchpads can emulate extended protocols (like IMPS/2).
* Unfortunately Logitech/Genius probes confuse some firmware versions so
* we'll have to skip them.
*/
/*
* Some Synaptics touchpads can emulate extended
* protocols (like IMPS/2). Unfortunately
* Logitech/Genius probes confuse some firmware
* versions so we'll have to skip them.
*/
max_proto = PSMOUSE_IMEX;
}
/*
* Make sure that touchpad is in relative mode, gestures (taps) are enabled
*/
/*
* Make sure that touchpad is in relative mode, gestures
* (taps) are enabled.
*/
synaptics_reset(psmouse);
}
/*
* Try Cypress Trackpad.
* Must try it before Finger Sensing Pad because Finger Sensing Pad probe
* upsets some modules of Cypress Trackpads.
*/
/*
* Try Cypress Trackpad. We must try it before Finger Sensing Pad
* because Finger Sensing Pad probe upsets some modules of Cypress
* Trackpads.
*/
if (max_proto > PSMOUSE_IMEX &&
cypress_detect(psmouse, set_properties) == 0) {
if (IS_ENABLED(CONFIG_MOUSE_PS2_CYPRESS)) {
......@@ -859,45 +851,34 @@ static int psmouse_extensions(struct psmouse *psmouse,
max_proto = PSMOUSE_IMEX;
}
/*
* Try ALPS TouchPad
*/
/* Try ALPS TouchPad */
if (max_proto > PSMOUSE_IMEX) {
ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
if (psmouse_do_detect(alps_detect,
psmouse, set_properties) == 0) {
if (!set_properties || alps_init(psmouse) == 0)
return PSMOUSE_ALPS;
/*
* Init failed, try basic relative protocols
*/
/* Init failed, try basic relative protocols */
max_proto = PSMOUSE_IMEX;
}
}
/*
* Try OLPC HGPK touchpad.
*/
/* Try OLPC HGPK touchpad */
if (max_proto > PSMOUSE_IMEX &&
psmouse_do_detect(hgpk_detect, psmouse, set_properties) == 0) {
if (!set_properties || hgpk_init(psmouse) == 0)
return PSMOUSE_HGPK;
/*
* Init failed, try basic relative protocols
*/
/* Init failed, try basic relative protocols */
max_proto = PSMOUSE_IMEX;
}
/*
* Try Elantech touchpad.
*/
/* Try Elantech touchpad */
if (max_proto > PSMOUSE_IMEX &&
psmouse_do_detect(elantech_detect, psmouse, set_properties) == 0) {
if (!set_properties || elantech_init(psmouse) == 0)
return PSMOUSE_ELANTECH;
/*
* Init failed, try basic relative protocols
*/
/* Init failed, try basic relative protocols */
max_proto = PSMOUSE_IMEX;
}
......@@ -919,27 +900,25 @@ static int psmouse_extensions(struct psmouse *psmouse,
return PSMOUSE_TOUCHKIT_PS2;
}
/*
* Try Finger Sensing Pad. We do it here because its probe upsets
* Trackpoint devices (causing TP_READ_ID command to time out).
*/
/*
* Try Finger Sensing Pad. We do it here because its probe upsets
* Trackpoint devices (causing TP_READ_ID command to time out).
*/
if (max_proto > PSMOUSE_IMEX) {
if (psmouse_do_detect(fsp_detect,
psmouse, set_properties) == 0) {
if (!set_properties || fsp_init(psmouse) == 0)
return PSMOUSE_FSP;
/*
* Init failed, try basic relative protocols
*/
/* Init failed, try basic relative protocols */
max_proto = PSMOUSE_IMEX;
}
}
/*
* Reset to defaults in case the device got confused by extended
* protocol probes. Note that we follow up with full reset because
* some mice put themselves to sleep when they see PSMOUSE_RESET_DIS.
*/
/*
* Reset to defaults in case the device got confused by extended
* protocol probes. Note that we follow up with full reset because
* some mice put themselves to sleep when they see PSMOUSE_RESET_DIS.
*/
ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
psmouse_reset(psmouse);
......@@ -955,19 +934,19 @@ static int psmouse_extensions(struct psmouse *psmouse,
return PSMOUSE_IMPS;
}
/*
* Okay, all failed, we have a standard mouse here. The number of the buttons
* is still a question, though. We assume 3.
*/
/*
* Okay, all failed, we have a standard mouse here. The number of
* the buttons is still a question, though. We assume 3.
*/
psmouse_do_detect(ps2bare_detect, psmouse, set_properties);
if (synaptics_hardware) {
/*
* We detected Synaptics hardware but it did not respond to IMPS/2 probes.
* We need to reset the touchpad because if there is a track point on the
* pass through port it could get disabled while probing for protocol
* extensions.
*/
/*
* We detected Synaptics hardware but it did not respond to
* IMPS/2 probes. We need to reset the touchpad because if
* there is a track point on the pass through port it could
* get disabled while probing for protocol extensions.
*/
psmouse_reset(psmouse);
}
......@@ -1167,19 +1146,17 @@ static const struct psmouse_protocol *psmouse_protocol_by_name(const char *name,
/*
* psmouse_probe() probes for a PS/2 mouse.
*/
static int psmouse_probe(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[2];
/*
* First, we check if it's a mouse. It should send 0x00 or 0x03
* in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer.
* Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and subsequent
* ID queries, probably due to a firmware bug.
*/
/*
* First, we check if it's a mouse. It should send 0x00 or 0x03 in
* case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer.
* Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and
* subsequent ID queries, probably due to a firmware bug.
*/
param[0] = 0xa5;
if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID))
return -1;
......@@ -1188,10 +1165,10 @@ static int psmouse_probe(struct psmouse *psmouse)
param[0] != 0x04 && param[0] != 0xff)
return -1;
/*
* Then we reset and disable the mouse so that it doesn't generate events.
*/
/*
* Then we reset and disable the mouse so that it doesn't generate
* events.
*/
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS))
psmouse_warn(psmouse, "Failed to reset mouse on %s\n",
ps2dev->serio->phys);
......@@ -1202,13 +1179,11 @@ static int psmouse_probe(struct psmouse *psmouse)
/*
* psmouse_initialize() initializes the mouse to a sane state.
*/
static void psmouse_initialize(struct psmouse *psmouse)
{
/*
* We set the mouse report rate, resolution and scaling.
*/
/*
* We set the mouse report rate, resolution and scaling.
*/
if (psmouse_max_proto != PSMOUSE_PS2) {
psmouse->set_rate(psmouse, psmouse->rate);
psmouse->set_resolution(psmouse, psmouse->resolution);
......@@ -1219,7 +1194,6 @@ static void psmouse_initialize(struct psmouse *psmouse)
/*
* psmouse_activate() enables the mouse so that we get motion reports from it.
*/
int psmouse_activate(struct psmouse *psmouse)
{
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
......@@ -1233,10 +1207,9 @@ int psmouse_activate(struct psmouse *psmouse)
}
/*
* psmouse_deactivate() puts the mouse into poll mode so that we don't get motion
* reports from it unless we explicitly request it.
* psmouse_deactivate() puts the mouse into poll mode so that we don't get
* motion reports from it unless we explicitly request it.
*/
int psmouse_deactivate(struct psmouse *psmouse)
{
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) {
......@@ -1249,11 +1222,9 @@ int psmouse_deactivate(struct psmouse *psmouse)
return 0;
}
/*
* psmouse_resync() attempts to re-validate current protocol.
*/
static void psmouse_resync(struct work_struct *work)
{
struct psmouse *parent = NULL, *psmouse =
......@@ -1273,16 +1244,16 @@ static void psmouse_resync(struct work_struct *work)
psmouse_deactivate(parent);
}
/*
* Some mice don't ACK commands sent while they are in the middle of
* transmitting motion packet. To avoid delay we use ps2_sendbyte()
* instead of ps2_command() which would wait for 200ms for an ACK
* that may never come.
* As an additional quirk ALPS touchpads may not only forget to ACK
* disable command but will stop reporting taps, so if we see that
* mouse at least once ACKs disable we will do full reconnect if ACK
* is missing.
*/
/*
* Some mice don't ACK commands sent while they are in the middle of
* transmitting motion packet. To avoid delay we use ps2_sendbyte()
* instead of ps2_command() which would wait for 200ms for an ACK
* that may never come.
* As an additional quirk ALPS touchpads may not only forget to ACK
* disable command but will stop reporting taps, so if we see that
* mouse at least once ACKs disable we will do full reconnect if ACK
* is missing.
*/
psmouse->num_resyncs++;
if (ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE, 20)) {
......@@ -1291,13 +1262,13 @@ static void psmouse_resync(struct work_struct *work)
} else
psmouse->acks_disable_command = true;
/*
* Poll the mouse. If it was reset the packet will be shorter than
* psmouse->pktsize and ps2_command will fail. We do not expect and
* do not handle scenario when mouse "upgrades" its protocol while
* disconnected since it would require additional delay. If we ever
* see a mouse that does it we'll adjust the code.
*/
/*
* Poll the mouse. If it was reset the packet will be shorter than
* psmouse->pktsize and ps2_command will fail. We do not expect and
* do not handle scenario when mouse "upgrades" its protocol while
* disconnected since it would require additional delay. If we ever
* see a mouse that does it we'll adjust the code.
*/
if (!failed) {
if (psmouse->poll(psmouse))
failed = true;
......@@ -1314,11 +1285,12 @@ static void psmouse_resync(struct work_struct *work)
psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
}
}
/*
* Now try to enable mouse. We try to do that even if poll failed and also
* repeat our attempts 5 times, otherwise we may be left out with disabled
* mouse.
*/
/*
* Now try to enable mouse. We try to do that even if poll failed
* and also repeat our attempts 5 times, otherwise we may be left
* out with disabled mouse.
*/
for (i = 0; i < 5; i++) {
if (!ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
enabled = true;
......@@ -1350,7 +1322,6 @@ static void psmouse_resync(struct work_struct *work)
/*
* psmouse_cleanup() resets the mouse into power-on state.
*/
static void psmouse_cleanup(struct serio *serio)
{
struct psmouse *psmouse = serio_get_drvdata(serio);
......@@ -1375,15 +1346,15 @@ static void psmouse_cleanup(struct serio *serio)
if (psmouse->cleanup)
psmouse->cleanup(psmouse);
/*
* Reset the mouse to defaults (bare PS/2 protocol).
*/
/*
* Reset the mouse to defaults (bare PS/2 protocol).
*/
ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
/*
* Some boxes, such as HP nx7400, get terribly confused if mouse
* is not fully enabled before suspending/shutting down.
*/
/*
* Some boxes, such as HP nx7400, get terribly confused if mouse
* is not fully enabled before suspending/shutting down.
*/
ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
if (parent) {
......@@ -1399,7 +1370,6 @@ static void psmouse_cleanup(struct serio *serio)
/*
* psmouse_disconnect() closes and frees.
*/
static void psmouse_disconnect(struct serio *serio)
{
struct psmouse *psmouse, *parent = NULL;
......@@ -1599,7 +1569,6 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv)
goto out;
}
static int psmouse_reconnect(struct serio *serio)
{
struct psmouse *psmouse = serio_get_drvdata(serio);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或