Merge branch 'next-sriov' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc into next

Merge Richard's work to support SR-IOV on PowerNV. All generic PCI
patches acked by Bjorn.

Some minor conflicts with Daniel's pci_controller_ops work.

Conflicts:
	arch/powerpc/include/asm/machdep.h
	arch/powerpc/platforms/powernv/pci-ioda.c

Documentation/powerpc/pci_iov_resource_on_powernv.txt

+Wei Yang <weiyang@linux.vnet.ibm.com>
+Benjamin Herrenschmidt <benh@au1.ibm.com>
+Bjorn Helgaas <bhelgaas@google.com>
+26 Aug 2014
+
+This document describes the requirement from hardware for PCI MMIO resource
+sizing and assignment on PowerKVM and how generic PCI code handles this
+requirement. The first two sections describe the concepts of Partitionable
+Endpoints and the implementation on P8 (IODA2). The next two sections talks
+about considerations on enabling SRIOV on IODA2.
+
+1. Introduction to Partitionable Endpoints
+
+A Partitionable Endpoint (PE) is a way to group the various resources
+associated with a device or a set of devices to provide isolation between
+partitions (i.e., filtering of DMA, MSIs etc.) and to provide a mechanism
+to freeze a device that is causing errors in order to limit the possibility
+of propagation of bad data.
+
+There is thus, in HW, a table of PE states that contains a pair of "frozen"
+state bits (one for MMIO and one for DMA, they get set together but can be
+cleared independently) for each PE.
+
+When a PE is frozen, all stores in any direction are dropped and all loads
+return all 1's value. MSIs are also blocked. There's a bit more state that
+captures things like the details of the error that caused the freeze etc., but
+that's not critical.
+
+The interesting part is how the various PCIe transactions (MMIO, DMA, ...)
+are matched to their corresponding PEs.
+
+The following section provides a rough description of what we have on P8
+(IODA2).  Keep in mind that this is all per PHB (PCI host bridge).  Each PHB
+is a completely separate HW entity that replicates the entire logic, so has
+its own set of PEs, etc.
+
+2. Implementation of Partitionable Endpoints on P8 (IODA2)
+
+P8 supports up to 256 Partitionable Endpoints per PHB.
+
+  * Inbound
+
+    For DMA, MSIs and inbound PCIe error messages, we have a table (in
+    memory but accessed in HW by the chip) that provides a direct
+    correspondence between a PCIe RID (bus/dev/fn) with a PE number.
+    We call this the RTT.
+
+    - For DMA we then provide an entire address space for each PE that can
+      contain two "windows", depending on the value of PCI address bit 59.
+      Each window can be configured to be remapped via a "TCE table" (IOMMU
+      translation table), which has various configurable characteristics
+      not described here.
+
+    - For MSIs, we have two windows in the address space (one at the top of
+      the 32-bit space and one much higher) which, via a combination of the
+      address and MSI value, will result in one of the 2048 interrupts per
+      bridge being triggered.  There's a PE# in the interrupt controller
+      descriptor table as well which is compared with the PE# obtained from
+      the RTT to "authorize" the device to emit that specific interrupt.
+
+    - Error messages just use the RTT.
+
+  * Outbound.  That's where the tricky part is.
+
+    Like other PCI host bridges, the Power8 IODA2 PHB supports "windows"
+    from the CPU address space to the PCI address space.  There is one M32
+    window and sixteen M64 windows.  They have different characteristics.
+    First what they have in common: they forward a configurable portion of
+    the CPU address space to the PCIe bus and must be naturally aligned
+    power of two in size.  The rest is different:
+
+    - The M32 window:
+
+      * Is limited to 4GB in size.
+
+      * Drops the top bits of the address (above the size) and replaces
+	them with a configurable value.  This is typically used to generate
+	32-bit PCIe accesses.  We configure that window at boot from FW and
+	don't touch it from Linux; it's usually set to forward a 2GB
+	portion of address space from the CPU to PCIe
+	0x8000_0000..0xffff_ffff.  (Note: The top 64KB are actually
+	reserved for MSIs but this is not a problem at this point; we just
+	need to ensure Linux doesn't assign anything there, the M32 logic
+	ignores that however and will forward in that space if we try).
+
+      * It is divided into 256 segments of equal size.  A table in the chip
+	maps each segment to a PE#.  That allows portions of the MMIO space
+	to be assigned to PEs on a segment granularity.  For a 2GB window,
+	the segment granularity is 2GB/256 = 8MB.
+
+    Now, this is the "main" window we use in Linux today (excluding
+    SR-IOV).  We basically use the trick of forcing the bridge MMIO windows
+    onto a segment alignment/granularity so that the space behind a bridge
+    can be assigned to a PE.
+
+    Ideally we would like to be able to have individual functions in PEs
+    but that would mean using a completely different address allocation
+    scheme where individual function BARs can be "grouped" to fit in one or
+    more segments.
+
+    - The M64 windows:
+
+      * Must be at least 256MB in size.
+
+      * Do not translate addresses (the address on PCIe is the same as the
+	address on the PowerBus).  There is a way to also set the top 14
+	bits which are not conveyed by PowerBus but we don't use this.
+
+      * Can be configured to be segmented.  When not segmented, we can
+	specify the PE# for the entire window.  When segmented, a window
+	has 256 segments; however, there is no table for mapping a segment
+	to a PE#.  The segment number *is* the PE#.
+
+      * Support overlaps.  If an address is covered by multiple windows,
+	there's a defined ordering for which window applies.
+
+    We have code (fairly new compared to the M32 stuff) that exploits that
+    for large BARs in 64-bit space:
+
+    We configure an M64 window to cover the entire region of address space
+    that has been assigned by FW for the PHB (about 64GB, ignore the space
+    for the M32, it comes out of a different "reserve").  We configure it
+    as segmented.
+
+    Then we do the same thing as with M32, using the bridge alignment
+    trick, to match to those giant segments.
+
+    Since we cannot remap, we have two additional constraints:
+
+    - We do the PE# allocation *after* the 64-bit space has been assigned
+      because the addresses we use directly determine the PE#.  We then
+      update the M32 PE# for the devices that use both 32-bit and 64-bit
+      spaces or assign the remaining PE# to 32-bit only devices.
+
+    - We cannot "group" segments in HW, so if a device ends up using more
+      than one segment, we end up with more than one PE#.  There is a HW
+      mechanism to make the freeze state cascade to "companion" PEs but
+      that only works for PCIe error messages (typically used so that if
+      you freeze a switch, it freezes all its children).  So we do it in
+      SW.  We lose a bit of effectiveness of EEH in that case, but that's
+      the best we found.  So when any of the PEs freezes, we freeze the
+      other ones for that "domain".  We thus introduce the concept of
+      "master PE" which is the one used for DMA, MSIs, etc., and "secondary
+      PEs" that are used for the remaining M64 segments.
+
+    We would like to investigate using additional M64 windows in "single
+    PE" mode to overlay over specific BARs to work around some of that, for
+    example for devices with very large BARs, e.g., GPUs.  It would make
+    sense, but we haven't done it yet.
+
+3. Considerations for SR-IOV on PowerKVM
+
+  * SR-IOV Background
+
+    The PCIe SR-IOV feature allows a single Physical Function (PF) to
+    support several Virtual Functions (VFs).  Registers in the PF's SR-IOV
+    Capability control the number of VFs and whether they are enabled.
+
+    When VFs are enabled, they appear in Configuration Space like normal
+    PCI devices, but the BARs in VF config space headers are unusual.  For
+    a non-VF device, software uses BARs in the config space header to
+    discover the BAR sizes and assign addresses for them.  For VF devices,
+    software uses VF BAR registers in the *PF* SR-IOV Capability to
+    discover sizes and assign addresses.  The BARs in the VF's config space
+    header are read-only zeros.
+
+    When a VF BAR in the PF SR-IOV Capability is programmed, it sets the
+    base address for all the corresponding VF(n) BARs.  For example, if the
+    PF SR-IOV Capability is programmed to enable eight VFs, and it has a
+    1MB VF BAR0, the address in that VF BAR sets the base of an 8MB region.
+    This region is divided into eight contiguous 1MB regions, each of which
+    is a BAR0 for one of the VFs.  Note that even though the VF BAR
+    describes an 8MB region, the alignment requirement is for a single VF,
+    i.e., 1MB in this example.
+
+  There are several strategies for isolating VFs in PEs:
+
+  - M32 window: There's one M32 window, and it is split into 256
+    equally-sized segments.  The finest granularity possible is a 256MB
+    window with 1MB segments.  VF BARs that are 1MB or larger could be
+    mapped to separate PEs in this window.  Each segment can be
+    individually mapped to a PE via the lookup table, so this is quite
+    flexible, but it works best when all the VF BARs are the same size.  If
+    they are different sizes, the entire window has to be small enough that
+    the segment size matches the smallest VF BAR, which means larger VF
+    BARs span several segments.
+
+  - Non-segmented M64 window: A non-segmented M64 window is mapped entirely
+    to a single PE, so it could only isolate one VF.
+
+  - Single segmented M64 windows: A segmented M64 window could be used just
+    like the M32 window, but the segments can't be individually mapped to
+    PEs (the segment number is the PE#), so there isn't as much
+    flexibility.  A VF with multiple BARs would have to be in a "domain" of
+    multiple PEs, which is not as well isolated as a single PE.
+
+  - Multiple segmented M64 windows: As usual, each window is split into 256
+    equally-sized segments, and the segment number is the PE#.  But if we
+    use several M64 windows, they can be set to different base addresses
+    and different segment sizes.  If we have VFs that each have a 1MB BAR
+    and a 32MB BAR, we could use one M64 window to assign 1MB segments and
+    another M64 window to assign 32MB segments.
+
+  Finally, the plan to use M64 windows for SR-IOV, which will be described
+  more in the next two sections.  For a given VF BAR, we need to
+  effectively reserve the entire 256 segments (256 * VF BAR size) and
+  position the VF BAR to start at the beginning of a free range of
+  segments/PEs inside that M64 window.
+
+  The goal is of course to be able to give a separate PE for each VF.
+
+  The IODA2 platform has 16 M64 windows, which are used to map MMIO
+  range to PE#.  Each M64 window defines one MMIO range and this range is
+  divided into 256 segments, with each segment corresponding to one PE.
+
+  We decide to leverage this M64 window to map VFs to individual PEs, since
+  SR-IOV VF BARs are all the same size.
+
+  But doing so introduces another problem: total_VFs is usually smaller
+  than the number of M64 window segments, so if we map one VF BAR directly
+  to one M64 window, some part of the M64 window will map to another
+  device's MMIO range.
+
+  IODA supports 256 PEs, so segmented windows contain 256 segments, so if
+  total_VFs is less than 256, we have the situation in Figure 1.0, where
+  segments [total_VFs, 255] of the M64 window may map to some MMIO range on
+  other devices:
+
+     0      1                     total_VFs - 1
+     +------+------+-     -+------+------+
+     |      |      |  ...  |      |      |
+     +------+------+-     -+------+------+
+
+                           VF(n) BAR space
+
+     0      1                     total_VFs - 1                255
+     +------+------+-     -+------+------+-      -+------+------+
+     |      |      |  ...  |      |      |   ...  |      |      |
+     +------+------+-     -+------+------+-      -+------+------+
+
+                           M64 window
+
+		Figure 1.0 Direct map VF(n) BAR space
+
+  Our current solution is to allocate 256 segments even if the VF(n) BAR
+  space doesn't need that much, as shown in Figure 1.1:
+
+     0      1                     total_VFs - 1                255
+     +------+------+-     -+------+------+-      -+------+------+
+     |      |      |  ...  |      |      |   ...  |      |      |
+     +------+------+-     -+------+------+-      -+------+------+
+
+                           VF(n) BAR space + extra
+
+     0      1                     total_VFs - 1                255
+     +------+------+-     -+------+------+-      -+------+------+
+     |      |      |  ...  |      |      |   ...  |      |      |
+     +------+------+-     -+------+------+-      -+------+------+
+
+			   M64 window
+
+		Figure 1.1 Map VF(n) BAR space + extra
+
+  Allocating the extra space ensures that the entire M64 window will be
+  assigned to this one SR-IOV device and none of the space will be
+  available for other devices.  Note that this only expands the space
+  reserved in software; there are still only total_VFs VFs, and they only
+  respond to segments [0, total_VFs - 1].  There's nothing in hardware that
+  responds to segments [total_VFs, 255].
+
+4. Implications for the Generic PCI Code
+
+The PCIe SR-IOV spec requires that the base of the VF(n) BAR space be
+aligned to the size of an individual VF BAR.
+
+In IODA2, the MMIO address determines the PE#.  If the address is in an M32
+window, we can set the PE# by updating the table that translates segments
+to PE#s.  Similarly, if the address is in an unsegmented M64 window, we can
+set the PE# for the window.  But if it's in a segmented M64 window, the
+segment number is the PE#.
+
+Therefore, the only way to control the PE# for a VF is to change the base
+of the VF(n) BAR space in the VF BAR.  If the PCI core allocates the exact
+amount of space required for the VF(n) BAR space, the VF BAR value is fixed
+and cannot be changed.
+
+On the other hand, if the PCI core allocates additional space, the VF BAR
+value can be changed as long as the entire VF(n) BAR space remains inside
+the space allocated by the core.
+
+Ideally the segment size will be the same as an individual VF BAR size.
+Then each VF will be in its own PE.  The VF BARs (and therefore the PE#s)
+are contiguous.  If VF0 is in PE(x), then VF(n) is in PE(x+n).  If we
+allocate 256 segments, there are (256 - numVFs) choices for the PE# of VF0.
+
+If the segment size is smaller than the VF BAR size, it will take several
+segments to cover a VF BAR, and a VF will be in several PEs.  This is
+possible, but the isolation isn't as good, and it reduces the number of PE#
+choices because instead of consuming only numVFs segments, the VF(n) BAR
+space will consume (numVFs * n) segments.  That means there aren't as many
+available segments for adjusting base of the VF(n) BAR space.

arch/powerpc/include/asm/iommu.h

@@ -79,6 +79,9 @@ struct iommu_table {
 	struct iommu_group *it_group;
 #endif
 	void (*set_bypass)(struct iommu_table *tbl, bool enable);
+#ifdef CONFIG_PPC_POWERNV
+	void           *data;
+#endif
 };
 
 /* Pure 2^n version of get_order */

arch/powerpc/include/asm/machdep.h

@@ -236,6 +236,11 @@ struct machdep_calls {
 	/* Called after scan and before resource survey */
 	void (*pcibios_fixup_phb)(struct pci_controller *hose);
 
+#ifdef CONFIG_PCI_IOV
+	void (*pcibios_fixup_sriov)(struct pci_dev *pdev);
+	resource_size_t (*pcibios_iov_resource_alignment)(struct pci_dev *, int resno);
+#endif /* CONFIG_PCI_IOV */
+
 	/* Called to shutdown machine specific hardware not already controlled
 	 * by other drivers.
 	 */

arch/powerpc/include/asm/pci-bridge.h

@@ -175,6 +175,7 @@ struct iommu_table;
 
 struct pci_dn {
 	int     flags;
+#define PCI_DN_FLAG_IOV_VF	0x01
 
 	int	busno;			/* pci bus number */
 	int	devfn;			/* pci device and function number */
@@ -189,13 +190,21 @@ struct pci_dn {
 
 	int	pci_ext_config_space;	/* for pci devices */
 
-	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
 #ifdef CONFIG_EEH
 	struct eeh_dev *edev;		/* eeh device */
 #endif
 #define IODA_INVALID_PE		(-1)
 #ifdef CONFIG_PPC_POWERNV
 	int	pe_number;
+#ifdef CONFIG_PCI_IOV
+	u16     vfs_expanded;		/* number of VFs IOV BAR expanded */
+	u16     num_vfs;		/* number of VFs enabled*/
+	int     offset;			/* PE# for the first VF PE */
+#define M64_PER_IOV 4
+	int     m64_per_iov;
+#define IODA_INVALID_M64        (-1)
+	int     m64_wins[PCI_SRIOV_NUM_BARS][M64_PER_IOV];
+#endif /* CONFIG_PCI_IOV */
 #endif
 	struct list_head child_list;
 	struct list_head list;
@@ -207,6 +216,8 @@ struct pci_dn {
 extern struct pci_dn *pci_get_pdn_by_devfn(struct pci_bus *bus,
 					   int devfn);
 extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev);
+extern struct pci_dn *add_dev_pci_data(struct pci_dev *pdev);
+extern void remove_dev_pci_data(struct pci_dev *pdev);
 extern void *update_dn_pci_info(struct device_node *dn, void *data);
 
 static inline int pci_device_from_OF_node(struct device_node *np,

arch/powerpc/kernel/pci-common.c

@@ -134,6 +134,16 @@ void pcibios_reset_secondary_bus(struct pci_dev *dev)
 	pci_reset_secondary_bus(dev);
 }
 
+#ifdef CONFIG_PCI_IOV
+resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev, int resno)
+{
+	if (ppc_md.pcibios_iov_resource_alignment)
+		return ppc_md.pcibios_iov_resource_alignment(pdev, resno);
+
+	return pci_iov_resource_size(pdev, resno);
+}
+#endif /* CONFIG_PCI_IOV */
+
 static resource_size_t pcibios_io_size(const struct pci_controller *hose)
 {
 #ifdef CONFIG_PPC64
@@ -792,6 +802,10 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
 		       pci_name(dev));
 		return;
 	}
+
+	if (dev->is_virtfn)
+		return;
+
 	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 		struct resource *res = dev->resource + i;
 		struct pci_bus_region reg;
@@ -995,6 +1009,12 @@ int pcibios_add_device(struct pci_dev *dev)
 	 */
 	if (dev->bus->is_added)
 		pcibios_setup_device(dev);
+
+#ifdef CONFIG_PCI_IOV
+	if (ppc_md.pcibios_fixup_sriov)
+		ppc_md.pcibios_fixup_sriov(dev);
+#endif /* CONFIG_PCI_IOV */
+
 	return 0;
 }
 

arch/powerpc/kernel/pci_dn.c

@@ -136,6 +136,135 @@ struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
 	return NULL;
 }
 
+#ifdef CONFIG_PCI_IOV
+static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent,
+					   struct pci_dev *pdev,
+					   int busno, int devfn)
+{
+	struct pci_dn *pdn;
+
+	/* Except PHB, we always have the parent */
+	if (!parent)
+		return NULL;
+
+	pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
+	if (!pdn) {
+		dev_warn(&pdev->dev, "%s: Out of memory!\n", __func__);
+		return NULL;
+	}
+
+	pdn->phb = parent->phb;
+	pdn->parent = parent;
+	pdn->busno = busno;
+	pdn->devfn = devfn;
+#ifdef CONFIG_PPC_POWERNV
+	pdn->pe_number = IODA_INVALID_PE;
+#endif
+	INIT_LIST_HEAD(&pdn->child_list);
+	INIT_LIST_HEAD(&pdn->list);
+	list_add_tail(&pdn->list, &parent->child_list);
+
+	/*
+	 * If we already have PCI device instance, lets
+	 * bind them.
+	 */
+	if (pdev)
+		pdev->dev.archdata.pci_data = pdn;
+
+	return pdn;
+}
+#endif
+
+struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
+{
+#ifdef CONFIG_PCI_IOV
+	struct pci_dn *parent, *pdn;
+	int i;
+
+	/* Only support IOV for now */
+	if (!pdev->is_physfn)
+		return pci_get_pdn(pdev);
+
+	/* Check if VFs have been populated */
+	pdn = pci_get_pdn(pdev);
+	if (!pdn || (pdn->flags & PCI_DN_FLAG_IOV_VF))
+		return NULL;
+
+	pdn->flags |= PCI_DN_FLAG_IOV_VF;
+	parent = pci_bus_to_pdn(pdev->bus);
+	if (!parent)
+		return NULL;
+
+	for (i = 0; i < pci_sriov_get_totalvfs(pdev); i++) {
+		pdn = add_one_dev_pci_data(parent, NULL,
+					   pci_iov_virtfn_bus(pdev, i),
+					   pci_iov_virtfn_devfn(pdev, i));
+		if (!pdn) {
+			dev_warn(&pdev->dev, "%s: Cannot create firmware data for VF#%d\n",
+				 __func__, i);
+			return NULL;
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
+
+	return pci_get_pdn(pdev);
+}
+
+void remove_dev_pci_data(struct pci_dev *pdev)
+{
+#ifdef CONFIG_PCI_IOV
+	struct pci_dn *parent;
+	struct pci_dn *pdn, *tmp;
+	int i;
+
+	/*
+	 * VF and VF PE are created/released dynamically, so we need to
+	 * bind/unbind them.  Otherwise the VF and VF PE would be mismatched
+	 * when re-enabling SR-IOV.
+	 */
+	if (pdev->is_virtfn) {
+		pdn = pci_get_pdn(pdev);
+#ifdef CONFIG_PPC_POWERNV
+		pdn->pe_number = IODA_INVALID_PE;
+#endif
+		return;
+	}
+
+	/* Only support IOV PF for now */
+	if (!pdev->is_physfn)
+		return;
+
+	/* Check if VFs have been populated */
+	pdn = pci_get_pdn(pdev);
+	if (!pdn || !(pdn->flags & PCI_DN_FLAG_IOV_VF))
+		return;
+
+	pdn->flags &= ~PCI_DN_FLAG_IOV_VF;
+	parent = pci_bus_to_pdn(pdev->bus);
+	if (!parent)
+		return;
+
+	/*
+	 * We might introduce flag to pci_dn in future
+	 * so that we can release VF's firmware data in
+	 * a batch mode.
+	 */
+	for (i = 0; i < pci_sriov_get_totalvfs(pdev); i++) {
+		list_for_each_entry_safe(pdn, tmp,
+			&parent->child_list, list) {
+			if (pdn->busno != pci_iov_virtfn_bus(pdev, i) ||
+			    pdn->devfn != pci_iov_virtfn_devfn(pdev, i))
+				continue;
+
+			if (!list_empty(&pdn->list))
+				list_del(&pdn->list);
+
+			kfree(pdn);
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
+}
+
 /*
  * Traverse_func that inits the PCI fields of the device node.
  * NOTE: this *must* be done before read/write config to the device.

arch/powerpc/platforms/powernv/pci.c

@@ -666,6 +666,24 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	struct pnv_phb *phb = hose->private_data;
+#ifdef CONFIG_PCI_IOV
+	struct pnv_ioda_pe *pe;
+	struct pci_dn *pdn;
+
+	/* Fix the VF pdn PE number */
+	if (pdev->is_virtfn) {
+		pdn = pci_get_pdn(pdev);
+		WARN_ON(pdn->pe_number != IODA_INVALID_PE);
+		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+			if (pe->rid == ((pdev->bus->number << 8) |
+			    (pdev->devfn & 0xff))) {
+				pdn->pe_number = pe->pe_number;
+				pe->pdev = pdev;
+				break;
+			}
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
 
 	if (phb && phb->dma_dev_setup)
 		phb->dma_dev_setup(phb, pdev);

arch/powerpc/platforms/powernv/pci.h

@@ -23,6 +23,7 @@ enum pnv_phb_model {
 #define PNV_IODA_PE_BUS_ALL	(1 << 2)	/* PE has subordinate buses	*/
 #define PNV_IODA_PE_MASTER	(1 << 3)	/* Master PE in compound case	*/
 #define PNV_IODA_PE_SLAVE	(1 << 4)	/* Slave PE in compound case	*/
+#define PNV_IODA_PE_VF		(1 << 5)	/* PE for one VF 		*/
 
 /* Data associated with a PE, including IOMMU tracking etc.. */
 struct pnv_phb;
@@ -34,6 +35,9 @@ struct pnv_ioda_pe {
 	 * entire bus (& children). In the former case, pdev
 	 * is populated, in the later case, pbus is.
 	 */
+#ifdef CONFIG_PCI_IOV
+	struct pci_dev          *parent_dev;
+#endif
 	struct pci_dev		*pdev;
 	struct pci_bus		*pbus;
 
@@ -53,7 +57,7 @@ struct pnv_ioda_pe {
 	/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
 	int			tce32_seg;
 	int			tce32_segcount;
-	struct iommu_table	tce32_table;
+	struct iommu_table	*tce32_table;
 	phys_addr_t		tce_inval_reg_phys;
 
 	/* 64-bit TCE bypass region */
@@ -145,6 +149,8 @@ struct pnv_phb {
 
 			/* PE allocation bitmap */
 			unsigned long		*pe_alloc;
+			/* PE allocation mutex */
+			struct mutex		pe_alloc_mutex;
 
 			/* M32 & IO segment maps */
 			unsigned int		*m32_segmap;
@@ -159,6 +165,7 @@ struct pnv_phb {
 			 * on the sequence of creation
 			 */
 			struct list_head	pe_list;
+			struct mutex            pe_list_mutex;
 
 			/* Reverse map of PEs, will have to extend if
 			 * we are to support more than 256 PEs, indexed

drivers/pci/iov.c

@@ -19,16 +19,59 @@
 
 #define VIRTFN_ID_LEN	16
 
-static inline u8 virtfn_bus(struct pci_dev *dev, int id)
+int pci_iov_virtfn_bus(struct pci_dev *dev, int vf_id)
 {
+	if (!dev->is_physfn)
+		return -EINVAL;
 	return dev->bus->number + ((dev->devfn + dev->sriov->offset +
-				    dev->sriov->stride * id) >> 8);
+				    dev->sriov->stride * vf_id) >> 8);
 }
 
-static inline u8 virtfn_devfn(struct pci_dev *dev, int id)
+int pci_iov_virtfn_devfn(struct pci_dev *dev, int vf_id)
 {
+	if (!dev->is_physfn)
+		return -EINVAL;
 	return (dev->devfn + dev->sriov->offset +
-		dev->sriov->stride * id) & 0xff;
+		dev->sriov->stride * vf_id) & 0xff;
+}
+
+/*
+ * Per SR-IOV spec sec 3.3.10 and 3.3.11, First VF Offset and VF Stride may
+ * change when NumVFs changes.
+ *
+ * Update iov->offset and iov->stride when NumVFs is written.
+ */
+static inline void pci_iov_set_numvfs(struct pci_dev *dev, int nr_virtfn)
+{
+	struct pci_sriov *iov = dev->sriov;
+
+	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn);
+	pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_OFFSET, &iov->offset);
+	pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_STRIDE, &iov->stride);
+}
+
+/*
+ * The PF consumes one bus number.  NumVFs, First VF Offset, and VF Stride
+ * determine how many additional bus numbers will be consumed by VFs.
+ *
+ * Iterate over all valid NumVFs and calculate the maximum number of bus
+ * numbers that could ever be required.
+ */
+static inline u8 virtfn_max_buses(struct pci_dev *dev)
+{
+	struct pci_sriov *iov = dev->sriov;
+	int nr_virtfn;
+	u8 max = 0;
+	int busnr;
+
+	for (nr_virtfn = 1; nr_virtfn <= iov->total_VFs; nr_virtfn++) {
+		pci_iov_set_numvfs(dev, nr_virtfn);
+		busnr = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
+		if (busnr > max)
+			max = busnr;
+	}
+
+	return max;
 }
 
 static struct pci_bus *virtfn_add_bus(struct pci_bus *bus, int busnr)
@@ -57,6 +100,14 @@ static void virtfn_remove_bus(struct pci_bus *physbus, struct pci_bus *virtbus)
 		pci_remove_bus(virtbus);
 }
 
+resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
+{
+	if (!dev->is_physfn)
+		return 0;
+
+	return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
+}
+
 static int virtfn_add(struct pci_dev *dev, int id, int reset)
 {
 	int i;
@@ -69,7 +120,7 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
 	struct pci_bus *bus;
 
 	mutex_lock(&iov->dev->sriov->lock);
-	bus = virtfn_add_bus(dev->bus, virtfn_bus(dev, id));
+	bus = virtfn_add_bus(dev->bus, pci_iov_virtfn_bus(dev, id));
 	if (!bus)
 		goto failed;
 
@@ -77,7 +128,7 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
 	if (!virtfn)
 		goto failed0;
 
-	virtfn->devfn = virtfn_devfn(dev, id);
+	virtfn->devfn = pci_iov_virtfn_devfn(dev, id);
 	virtfn->vendor = dev->vendor;
 	pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_DID, &virtfn->device);
 	pci_setup_device(virtfn);
@@ -87,13 +138,12 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
 	virtfn->multifunction = 0;
 
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
-		res = dev->resource + PCI_IOV_RESOURCES + i;
+		res = &dev->resource[i + PCI_IOV_RESOURCES];
 		if (!res->parent)
 			continue;
 		virtfn->resource[i].name = pci_name(virtfn);
 		virtfn->resource[i].flags = res->flags;
-		size = resource_size(res);
-		do_div(size, iov->total_VFs);
+		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
 		virtfn->resource[i].start = res->start + size * id;
 		virtfn->resource[i].end = virtfn->resource[i].start + size - 1;
 		rc = request_resource(res, &virtfn->resource[i]);
@@ -140,8 +190,8 @@ static void virtfn_remove(struct pci_dev *dev, int id, int reset)
 	struct pci_sriov *iov = dev->sriov;
 
 	virtfn = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
-					     virtfn_bus(dev, id),
-					     virtfn_devfn(dev, id));
+					     pci_iov_virtfn_bus(dev, id),
+					     pci_iov_virtfn_devfn(dev, id));
 	if (!virtfn)
 		return;
 
@@ -170,6 +220,11 @@ static void virtfn_remove(struct pci_dev *dev, int id, int reset)
 	pci_dev_put(dev);
 }
 
+int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
+{
+       return 0;
+}
+
 static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 {
 	int rc;
@@ -180,6 +235,8 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	struct pci_dev *pdev;
 	struct pci_sriov *iov = dev->sriov;
 	int bars = 0;
+	int bus;
+	int retval;
 
 	if (!nr_virtfn)
 		return 0;
@@ -204,7 +261,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	nres = 0;
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
 		bars |= (1 << (i + PCI_IOV_RESOURCES));
-		res = dev->resource + PCI_IOV_RESOURCES + i;
+		res = &dev->resource[i + PCI_IOV_RESOURCES];
 		if (res->parent)
 			nres++;
 	}
@@ -216,8 +273,10 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	iov->offset = offset;
 	iov->stride = stride;
 
-	if (virtfn_bus(dev, nr_virtfn - 1) > dev->bus->busn_res.end) {
-		dev_err(&dev->dev, "SR-IOV: bus number out of range\n");
+	bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
+	if (bus > dev->bus->busn_res.end) {
+		dev_err(&dev->dev, "can't enable %d VFs (bus %02x out of range of %pR)\n",
+			nr_virtfn, bus, &dev->bus->busn_res);
 		return -ENOMEM;
 	}
 
@@ -243,7 +302,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 			return rc;
 	}
 
-	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn);
+	pci_iov_set_numvfs(dev, nr_virtfn);
 	iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
 	pci_cfg_access_lock(dev);
 	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
@@ -254,6 +313,12 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	if (nr_virtfn < initial)
 		initial = nr_virtfn;
 
+	if ((retval = pcibios_sriov_enable(dev, initial))) {
+		dev_err(&dev->dev, "failure %d from pcibios_sriov_enable()\n",
+			retval);
+		return retval;
+	}
+
 	for (i = 0; i < initial; i++) {
 		rc = virtfn_add(dev, i, 0);
 		if (rc)
@@ -272,7 +337,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
 	pci_cfg_access_lock(dev);
 	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
-	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, 0);
+	pci_iov_set_numvfs(dev, 0);
 	ssleep(1);
 	pci_cfg_access_unlock(dev);
 
@@ -282,6 +347,11 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	return rc;
 }
 
+int __weak pcibios_sriov_disable(struct pci_dev *pdev)
+{
+       return 0;
+}
+
 static void sriov_disable(struct pci_dev *dev)
 {
 	int i;
@@ -293,6 +363,8 @@ static void sriov_disable(struct pci_dev *dev)
 	for (i = 0; i < iov->num_VFs; i++)
 		virtfn_remove(dev, i, 0);
 
+	pcibios_sriov_disable(dev);
+
 	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
 	pci_cfg_access_lock(dev);
 	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
@@ -303,12 +375,12 @@ static void sriov_disable(struct pci_dev *dev)
 		sysfs_remove_link(&dev->dev.kobj, "dep_link");
 
 	iov->num_VFs = 0;
-	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, 0);
+	pci_iov_set_numvfs(dev, 0);
 }
 
 static int sriov_init(struct pci_dev *dev, int pos)
 {
-	int i;
+	int i, bar64;
 	int rc;
 	int nres;
 	u32 pgsz;
@@ -357,27 +429,29 @@ static int sriov_init(struct pci_dev *dev, int pos)
 	pgsz &= ~(pgsz - 1);
 	pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
 
+	iov = kzalloc(sizeof(*iov), GFP_KERNEL);
+	if (!iov)
+		return -ENOMEM;
+
 	nres = 0;
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
-		res = dev->resource + PCI_IOV_RESOURCES + i;
-		i += __pci_read_base(dev, pci_bar_unknown, res,
-				     pos + PCI_SRIOV_BAR + i * 4);
+		res = &dev->resource[i + PCI_IOV_RESOURCES];
+		bar64 = __pci_read_base(dev, pci_bar_unknown, res,
+					pos + PCI_SRIOV_BAR + i * 4);
 		if (!res->flags)
 			continue;
 		if (resource_size(res) & (PAGE_SIZE - 1)) {
 			rc = -EIO;
 			goto failed;
 		}
+		iov->barsz[i] = resource_size(res);
 		res->end = res->start + resource_size(res) * total - 1;
+		dev_info(&dev->dev, "VF(n) BAR%d space: %pR (contains BAR%d for %d VFs)\n",
+			 i, res, i, total);
+		i += bar64;
 		nres++;
 	}
 
-	iov = kzalloc(sizeof(*iov), GFP_KERNEL);
-	if (!iov) {
-		rc = -ENOMEM;
-		goto failed;
-	}
-
 	iov->pos = pos;
 	iov->nres = nres;
 	iov->ctrl = ctrl;
@@ -400,15 +474,17 @@ static int sriov_init(struct pci_dev *dev, int pos)
 
 	dev->sriov = iov;
 	dev->is_physfn = 1;
+	iov->max_VF_buses = virtfn_max_buses(dev);
 
 	return 0;
 
 failed:
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
-		res = dev->resource + PCI_IOV_RESOURCES + i;
+		res = &dev->resource[i + PCI_IOV_RESOURCES];
 		res->flags = 0;
 	}
 
+	kfree(iov);
 	return rc;
 }
 
@@ -439,7 +515,7 @@ static void sriov_restore_state(struct pci_dev *dev)
 		pci_update_resource(dev, i);
 
 	pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz);
-	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, iov->num_VFs);
+	pci_iov_set_numvfs(dev, iov->num_VFs);
 	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
 	if (iov->ctrl & PCI_SRIOV_CTRL_VFE)
 		msleep(100);
@@ -493,6 +569,12 @@ int pci_iov_resource_bar(struct pci_dev *dev, int resno)
 		4 * (resno - PCI_IOV_RESOURCES);
 }
 
+resource_size_t __weak pcibios_iov_resource_alignment(struct pci_dev *dev,
+						      int resno)
+{
+	return pci_iov_resource_size(dev, resno);
+}
+
 /**
  * pci_sriov_resource_alignment - get resource alignment for VF BAR
  * @dev: the PCI device
@@ -505,14 +587,7 @@ int pci_iov_resource_bar(struct pci_dev *dev, int resno)
  */
 resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
 {
-	struct resource tmp;
-	int reg = pci_iov_resource_bar(dev, resno);
-
-	if (!reg)
-		return 0;
-
-	 __pci_read_base(dev, pci_bar_unknown, &tmp, reg);
-	return resource_alignment(&tmp);
+	return pcibios_iov_resource_alignment(dev, resno);
 }
 
 /**
@@ -535,15 +610,13 @@ void pci_restore_iov_state(struct pci_dev *dev)
 int pci_iov_bus_range(struct pci_bus *bus)
 {
 	int max = 0;
-	u8 busnr;
 	struct pci_dev *dev;
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (!dev->is_physfn)
 			continue;
-		busnr = virtfn_bus(dev, dev->sriov->total_VFs - 1);
-		if (busnr > max)
-			max = busnr;
+		if (dev->sriov->max_VF_buses > max)
+			max = dev->sriov->max_VF_buses;
 	}
 
 	return max ? max - bus->number : 0;

drivers/pci/pci.h

@@ -243,10 +243,12 @@ struct pci_sriov {
 	u16 stride;		/* following VF stride */
 	u32 pgsz;		/* page size for BAR alignment */
 	u8 link;		/* Function Dependency Link */
+	u8 max_VF_buses;	/* max buses consumed by VFs */
 	u16 driver_max_VFs;	/* max num VFs driver supports */
 	struct pci_dev *dev;	/* lowest numbered PF */
 	struct pci_dev *self;	/* this PF */
 	struct mutex lock;	/* lock for VF bus */
+	resource_size_t barsz[PCI_SRIOV_NUM_BARS];	/* VF BAR size */
 };
 
 #ifdef CONFIG_PCI_ATS

drivers/pci/setup-bus.c

@@ -99,8 +99,8 @@ static void remove_from_list(struct list_head *head,
 	}
 }
 
-static resource_size_t get_res_add_size(struct list_head *head,
-					struct resource *res)
+static struct pci_dev_resource *res_to_dev_res(struct list_head *head,
+					       struct resource *res)
 {
 	struct pci_dev_resource *dev_res;
 
@@ -109,17 +109,37 @@ static resource_size_t get_res_add_size(struct list_head *head,
 			int idx = res - &dev_res->dev->resource[0];
 
 			dev_printk(KERN_DEBUG, &dev_res->dev->dev,
-				 "res[%d]=%pR get_res_add_size add_size %llx\n",
+				 "res[%d]=%pR res_to_dev_res add_size %llx min_align %llx\n",
 				 idx, dev_res->res,
-				 (unsigned long long)dev_res->add_size);
+				 (unsigned long long)dev_res->add_size,
+				 (unsigned long long)dev_res->min_align);
 
-			return dev_res->add_size;
+			return dev_res;
 		}
 	}
 
-	return 0;
+	return NULL;
 }
 
+static resource_size_t get_res_add_size(struct list_head *head,
+					struct resource *res)
+{
+	struct pci_dev_resource *dev_res;
+
+	dev_res = res_to_dev_res(head, res);
+	return dev_res ? dev_res->add_size : 0;
+}
+
+static resource_size_t get_res_add_align(struct list_head *head,
+					 struct resource *res)
+{
+	struct pci_dev_resource *dev_res;
+
+	dev_res = res_to_dev_res(head, res);
+	return dev_res ? dev_res->min_align : 0;
+}
+
+
 /* Sort resources by alignment */
 static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head)
 {
@@ -215,7 +235,7 @@ static void reassign_resources_sorted(struct list_head *realloc_head,
 	struct resource *res;
 	struct pci_dev_resource *add_res, *tmp;
 	struct pci_dev_resource *dev_res;
-	resource_size_t add_size;
+	resource_size_t add_size, align;
 	int idx;
 
 	list_for_each_entry_safe(add_res, tmp, realloc_head, list) {
@@ -238,13 +258,13 @@ static void reassign_resources_sorted(struct list_head *realloc_head,
 
 		idx = res - &add_res->dev->resource[0];
 		add_size = add_res->add_size;
+		align = add_res->min_align;
 		if (!resource_size(res)) {
-			res->start = add_res->start;
+			res->start = align;
 			res->end = res->start + add_size - 1;
 			if (pci_assign_resource(add_res->dev, idx))
 				reset_resource(res);
 		} else {
-			resource_size_t align = add_res->min_align;
 			res->flags |= add_res->flags &
 				 (IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN);
 			if (pci_reassign_resource(add_res->dev, idx,
@@ -368,8 +388,9 @@ static void __assign_resources_sorted(struct list_head *head,
 	LIST_HEAD(save_head);
 	LIST_HEAD(local_fail_head);
 	struct pci_dev_resource *save_res;
-	struct pci_dev_resource *dev_res, *tmp_res;
+	struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
 	unsigned long fail_type;
+	resource_size_t add_align, align;
 
 	/* Check if optional add_size is there */
 	if (!realloc_head || list_empty(realloc_head))
@@ -384,10 +405,44 @@ static void __assign_resources_sorted(struct list_head *head,
 	}
 
 	/* Update res in head list with add_size in realloc_head list */
-	list_for_each_entry(dev_res, head, list)
+	list_for_each_entry_safe(dev_res, tmp_res, head, list) {
 		dev_res->res->end += get_res_add_size(realloc_head,
 							dev_res->res);
 
+		/*
+		 * There are two kinds of additional resources in the list:
+		 * 1. bridge resource  -- IORESOURCE_STARTALIGN
+		 * 2. SR-IOV resource   -- IORESOURCE_SIZEALIGN
+		 * Here just fix the additional alignment for bridge
+		 */
+		if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
+			continue;
+
+		add_align = get_res_add_align(realloc_head, dev_res->res);
+
+		/*
+		 * The "head" list is sorted by the alignment to make sure
+		 * resources with bigger alignment will be assigned first.
+		 * After we change the alignment of a dev_res in "head" list,
+		 * we need to reorder the list by alignment to make it
+		 * consistent.
+		 */
+		if (add_align > dev_res->res->start) {
+			dev_res->res->start = add_align;
+			dev_res->res->end = add_align +
+				            resource_size(dev_res->res);
+
+			list_for_each_entry(dev_res2, head, list) {
+				align = pci_resource_alignment(dev_res2->dev,
+							       dev_res2->res);
+				if (add_align > align)
+					list_move_tail(&dev_res->list,
+						       &dev_res2->list);
+			}
+               }
+
+	}
+
 	/* Try updated head list with add_size added */
 	assign_requested_resources_sorted(head, &local_fail_head);
 
@@ -962,6 +1017,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 	struct resource *b_res = find_free_bus_resource(bus,
 					mask | IORESOURCE_PREFETCH, type);
 	resource_size_t children_add_size = 0;
+	resource_size_t children_add_align = 0;
+	resource_size_t add_align = 0;
 
 	if (!b_res)
 		return -ENOSPC;
@@ -986,6 +1043,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			/* put SRIOV requested res to the optional list */
 			if (realloc_head && i >= PCI_IOV_RESOURCES &&
 					i <= PCI_IOV_RESOURCE_END) {
+				add_align = max(pci_resource_alignment(dev, r), add_align);
 				r->end = r->start - 1;
 				add_to_list(realloc_head, dev, r, r_size, 0/* don't care */);
 				children_add_size += r_size;
@@ -1016,19 +1074,23 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			if (order > max_order)
 				max_order = order;
 
-			if (realloc_head)
+			if (realloc_head) {
 				children_add_size += get_res_add_size(realloc_head, r);
+				children_add_align = get_res_add_align(realloc_head, r);
+				add_align = max(add_align, children_add_align);
+			}
 		}
 	}
 
 	min_align = calculate_mem_align(aligns, max_order);
 	min_align = max(min_align, window_alignment(bus, b_res->flags));
 	size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
+	add_align = max(min_align, add_align);
 	if (children_add_size > add_size)
 		add_size = children_add_size;
 	size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
 		calculate_memsize(size, min_size, add_size,
-				resource_size(b_res), min_align);
+				resource_size(b_res), add_align);
 	if (!size0 && !size1) {
 		if (b_res->start || b_res->end)
 			dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
@@ -1040,10 +1102,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 	b_res->end = size0 + min_align - 1;
 	b_res->flags |= IORESOURCE_STARTALIGN;
 	if (size1 > size0 && realloc_head) {
-		add_to_list(realloc_head, bus->self, b_res, size1-size0, min_align);
-		dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx\n",
+		add_to_list(realloc_head, bus->self, b_res, size1-size0, add_align);
+		dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx add_align %llx\n",
 			   b_res, &bus->busn_res,
-			   (unsigned long long)size1-size0);
+			   (unsigned long long) (size1 - size0),
+			   (unsigned long long) add_align);
 	}
 	return 0;
 }

include/linux/pci.h

@@ -1174,6 +1174,7 @@ unsigned char pci_bus_max_busnr(struct pci_bus *bus);
 void pci_setup_bridge(struct pci_bus *bus);
 resource_size_t pcibios_window_alignment(struct pci_bus *bus,
 					 unsigned long type);
+resource_size_t pcibios_iov_resource_alignment(struct pci_dev *dev, int resno);
 
 #define PCI_VGA_STATE_CHANGE_BRIDGE (1 << 0)
 #define PCI_VGA_STATE_CHANGE_DECODES (1 << 1)
@@ -1669,13 +1670,25 @@ int pci_ext_cfg_avail(void);
 void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar);
 
 #ifdef CONFIG_PCI_IOV
+int pci_iov_virtfn_bus(struct pci_dev *dev, int id);
+int pci_iov_virtfn_devfn(struct pci_dev *dev, int id);
+
 int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
 void pci_disable_sriov(struct pci_dev *dev);
 int pci_num_vf(struct pci_dev *dev);
 int pci_vfs_assigned(struct pci_dev *dev);
 int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs);
 int pci_sriov_get_totalvfs(struct pci_dev *dev);
+resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno);
 #else
+static inline int pci_iov_virtfn_bus(struct pci_dev *dev, int id)
+{
+	return -ENOSYS;
+}
+static inline int pci_iov_virtfn_devfn(struct pci_dev *dev, int id)
+{
+	return -ENOSYS;
+}
 static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
 { return -ENODEV; }
 static inline void pci_disable_sriov(struct pci_dev *dev) { }
@@ -1686,6 +1699,8 @@ static inline int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
 { return 0; }
 static inline int pci_sriov_get_totalvfs(struct pci_dev *dev)
 { return 0; }
+static inline resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
+{ return 0; }
 #endif
 
 #if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)