Merge tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:
 "There are a few more fixes than a normal rc4, largely due to the
  bubble introduced by the holiday break:

   - return -ENOSYS for syscall number -1, which previously returned an
     uninitialized value.

   - ensure of_clk_init() has been called in time_init(), without which
     clock drivers may not be initialized.

   - fix sifive,uart0 driver to properly display the baud rate. A fix to
     initialize MPIE that allows interrupts to be processed during
     system calls.

   - avoid erronously begin tracing IRQs when interrupts are disabled,
     which at least triggers suprious lockdep failures.

   - workaround for a warning related to calling smp_processor_id()
     while preemptible. The warning itself is suprious on currently
     availiable systems.

   - properly include the generic time VDSO calls. A fix to our kasan
     address mapping. A fix to the HiFive Unleashed device tree, which
     allows the Ethernet PHY to be properly initialized by Linux (as
     opposed to relying on the bootloader).

   - defconfig update to include SiFive's GPIO driver, which is present
     on the HiFive Unleashed and necessary to initialize the PHY.

   - avoid allocating memory while initializing reserved memory.

   - avoid allocating the last 4K of memory, as pointers there alias
     with syscall errors.

  There are also two cleanups that should have no functional effect but
  do fix build warnings:

   - drop a duplicated definition of PAGE_KERNEL_EXEC.

   - properly declare the asm register SP shim.

   - cleanup the rv32 memory size Kconfig entry, to reflect the actual
     size of memory availiable"

* tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix maximum allowed phsyical memory for RV32
  RISC-V: Set current memblock limit
  RISC-V: Do not allocate memblock while iterating reserved memblocks
  riscv: stacktrace: Move register keyword to beginning of declaration
  riscv: defconfig: enable gpio support for HiFive Unleashed
  dts: phy: add GPIO number and active state used for phy reset
  dts: phy: fix missing mdio device and probe failure of vsc8541-01 device
  riscv: Fix KASAN memory mapping.
  riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL
  riscv: cacheinfo: Fix using smp_processor_id() in preemptible
  riscv: Trace irq on only interrupt is enabled
  riscv: Drop a duplicated PAGE_KERNEL_EXEC
  riscv: Enable interrupts during syscalls with M-Mode
  riscv: Fix sifive serial driver
  riscv: Fix kernel time_init()
  riscv: return -ENOSYS for syscall -1

arch/riscv/Kconfig

@@ -137,7 +137,7 @@ config PA_BITS
 
 config PAGE_OFFSET
 	hex
-	default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
+	default 0xC0000000 if 32BIT && MAXPHYSMEM_1GB
 	default 0x80000000 if 64BIT && !MMU
 	default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
 	default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
@@ -247,10 +247,12 @@ config MODULE_SECTIONS
 
 choice
 	prompt "Maximum Physical Memory"
-	default MAXPHYSMEM_2GB if 32BIT
+	default MAXPHYSMEM_1GB if 32BIT
 	default MAXPHYSMEM_2GB if 64BIT && CMODEL_MEDLOW
 	default MAXPHYSMEM_128GB if 64BIT && CMODEL_MEDANY
 
+	config MAXPHYSMEM_1GB
+		bool "1GiB"
 	config MAXPHYSMEM_2GB
 		bool "2GiB"
 	config MAXPHYSMEM_128GB

arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts

@@ -88,7 +88,9 @@
 	phy-mode = "gmii";
 	phy-handle = <&phy0>;
 	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.0771";
 		reg = <0>;
+		reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 	};
 };
 

arch/riscv/configs/defconfig

@@ -64,6 +64,8 @@ CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_SPI=y
 CONFIG_SPI_SIFIVE=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SIFIVE=y
 # CONFIG_PTP_1588_CLOCK is not set
 CONFIG_POWER_RESET=y
 CONFIG_DRM=y

arch/riscv/include/asm/pgtable.h

@@ -99,7 +99,6 @@
 				| _PAGE_DIRTY)
 
 #define PAGE_KERNEL		__pgprot(_PAGE_KERNEL)
-#define PAGE_KERNEL_EXEC	__pgprot(_PAGE_KERNEL | _PAGE_EXEC)
 #define PAGE_KERNEL_READ	__pgprot(_PAGE_KERNEL & ~_PAGE_WRITE)
 #define PAGE_KERNEL_EXEC	__pgprot(_PAGE_KERNEL | _PAGE_EXEC)
 #define PAGE_KERNEL_READ_EXEC	__pgprot((_PAGE_KERNEL & ~_PAGE_WRITE) \

arch/riscv/include/asm/vdso.h

@@ -10,7 +10,7 @@
 
 #include <linux/types.h>
 
-#ifndef GENERIC_TIME_VSYSCALL
+#ifndef CONFIG_GENERIC_TIME_VSYSCALL
 struct vdso_data {
 };
 #endif

arch/riscv/kernel/cacheinfo.c

@@ -26,7 +26,16 @@ cache_get_priv_group(struct cacheinfo *this_leaf)
 
 static struct cacheinfo *get_cacheinfo(u32 level, enum cache_type type)
 {
-	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(smp_processor_id());
+	/*
+	 * Using raw_smp_processor_id() elides a preemptability check, but this
+	 * is really indicative of a larger problem: the cacheinfo UABI assumes
+	 * that cores have a homonogenous view of the cache hierarchy.  That
+	 * happens to be the case for the current set of RISC-V systems, but
+	 * likely won't be true in general.  Since there's no way to provide
+	 * correct information for these systems via the current UABI we're
+	 * just eliding the check for now.
+	 */
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(raw_smp_processor_id());
 	struct cacheinfo *this_leaf;
 	int index;
 

arch/riscv/kernel/entry.S

@@ -124,15 +124,15 @@ skip_context_tracking:
 	REG_L a1, (a1)
 	jr a1
 1:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	call trace_hardirqs_on
-#endif
 	/*
 	 * Exceptions run with interrupts enabled or disabled depending on the
 	 * state of SR_PIE in m/sstatus.
 	 */
 	andi t0, s1, SR_PIE
 	beqz t0, 1f
+#ifdef CONFIG_TRACE_IRQFLAGS
+	call trace_hardirqs_on
+#endif
 	csrs CSR_STATUS, SR_IE
 
 1:
@@ -155,6 +155,15 @@ skip_context_tracking:
 	tail do_trap_unknown
 
 handle_syscall:
+#ifdef CONFIG_RISCV_M_MODE
+	/*
+	 * When running is M-Mode (no MMU config), MPIE does not get set.
+	 * As a result, we need to force enable interrupts here because
+	 * handle_exception did not do set SR_IE as it always sees SR_PIE
+	 * being cleared.
+	 */
+	csrs CSR_STATUS, SR_IE
+#endif
 #if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING)
 	/* Recover a0 - a7 for system calls */
 	REG_L a0, PT_A0(sp)
@@ -186,14 +195,7 @@ check_syscall_nr:
 	 * Syscall number held in a7.
 	 * If syscall number is above allowed value, redirect to ni_syscall.
 	 */
-	bge a7, t0, 1f
-	/*
-	 * Check if syscall is rejected by tracer, i.e., a7 == -1.
-	 * If yes, we pretend it was executed.
-	 */
-	li t1, -1
-	beq a7, t1, ret_from_syscall_rejected
-	blt a7, t1, 1f
+	bgeu a7, t0, 1f
 	/* Call syscall */
 	la s0, sys_call_table
 	slli t0, a7, RISCV_LGPTR

arch/riscv/kernel/setup.c

@@ -127,7 +127,9 @@ static void __init init_resources(void)
 {
 	struct memblock_region *region = NULL;
 	struct resource *res = NULL;
-	int ret = 0;
+	struct resource *mem_res = NULL;
+	size_t mem_res_sz = 0;
+	int ret = 0, i = 0;
 
 	code_res.start = __pa_symbol(_text);
 	code_res.end = __pa_symbol(_etext) - 1;
@@ -145,16 +147,17 @@ static void __init init_resources(void)
 	bss_res.end = __pa_symbol(__bss_stop) - 1;
 	bss_res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
+	mem_res_sz = (memblock.memory.cnt + memblock.reserved.cnt) * sizeof(*mem_res);
+	mem_res = memblock_alloc(mem_res_sz, SMP_CACHE_BYTES);
+	if (!mem_res)
+		panic("%s: Failed to allocate %zu bytes\n", __func__, mem_res_sz);
 	/*
 	 * Start by adding the reserved regions, if they overlap
 	 * with /memory regions, insert_resource later on will take
 	 * care of it.
 	 */
 	for_each_reserved_mem_region(region) {
-		res = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-		if (!res)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(struct resource));
+		res = &mem_res[i++];
 
 		res->name = "Reserved";
 		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
@@ -171,8 +174,10 @@ static void __init init_resources(void)
 		 * Ignore any other reserved regions within
 		 * system memory.
 		 */
-		if (memblock_is_memory(res->start))
+		if (memblock_is_memory(res->start)) {
+			memblock_free((phys_addr_t) res, sizeof(struct resource));
 			continue;
+		}
 
 		ret = add_resource(&iomem_resource, res);
 		if (ret < 0)
@@ -181,10 +186,7 @@ static void __init init_resources(void)
 
 	/* Add /memory regions to the resource tree */
 	for_each_mem_region(region) {
-		res = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-		if (!res)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(struct resource));
+		res = &mem_res[i++];
 
 		if (unlikely(memblock_is_nomap(region))) {
 			res->name = "Reserved";
@@ -205,9 +207,9 @@ static void __init init_resources(void)
 	return;
 
  error:
-	memblock_free((phys_addr_t) res, sizeof(struct resource));
 	/* Better an empty resource tree than an inconsistent one */
 	release_child_resources(&iomem_resource);
+	memblock_free((phys_addr_t) mem_res, mem_res_sz);
 }
 
 

arch/riscv/kernel/stacktrace.c

@@ -14,7 +14,7 @@
 
 #include <asm/stacktrace.h>
 
-register unsigned long sp_in_global __asm__("sp");
+register const unsigned long sp_in_global __asm__("sp");
 
 #ifdef CONFIG_FRAME_POINTER
 
@@ -28,9 +28,8 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 		sp = user_stack_pointer(regs);
 		pc = instruction_pointer(regs);
 	} else if (task == NULL || task == current) {
-		const register unsigned long current_sp = sp_in_global;
 		fp = (unsigned long)__builtin_frame_address(0);
-		sp = current_sp;
+		sp = sp_in_global;
 		pc = (unsigned long)walk_stackframe;
 	} else {
 		/* task blocked in __switch_to */

arch/riscv/kernel/time.c

@@ -4,6 +4,7 @@
  * Copyright (C) 2017 SiFive
  */
 
+#include <linux/of_clk.h>
 #include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <asm/sbi.h>
@@ -24,6 +25,8 @@ void __init time_init(void)
 	riscv_timebase = prop;
 
 	lpj_fine = riscv_timebase / HZ;
+
+	of_clk_init(NULL);
 	timer_probe();
 }
 

arch/riscv/kernel/vdso.c

@@ -12,7 +12,7 @@
 #include <linux/binfmts.h>
 #include <linux/err.h>
 #include <asm/page.h>
-#ifdef GENERIC_TIME_VSYSCALL
+#ifdef CONFIG_GENERIC_TIME_VSYSCALL
 #include <vdso/datapage.h>
 #else
 #include <asm/vdso.h>

arch/riscv/mm/init.c

@@ -157,9 +157,10 @@ static void __init setup_initrd(void)
 void __init setup_bootmem(void)
 {
 	phys_addr_t mem_start = 0;
-	phys_addr_t start, end = 0;
+	phys_addr_t start, dram_end, end = 0;
 	phys_addr_t vmlinux_end = __pa_symbol(&_end);
 	phys_addr_t vmlinux_start = __pa_symbol(&_start);
+	phys_addr_t max_mapped_addr = __pa(~(ulong)0);
 	u64 i;
 
 	/* Find the memory region containing the kernel */
@@ -181,7 +182,18 @@ void __init setup_bootmem(void)
 	/* Reserve from the start of the kernel to the end of the kernel */
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
 
-	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	dram_end = memblock_end_of_DRAM();
+
+	/*
+	 * memblock allocator is not aware of the fact that last 4K bytes of
+	 * the addressable memory can not be mapped because of IS_ERR_VALUE
+	 * macro. Make sure that last 4k bytes are not usable by memblock
+	 * if end of dram is equal to maximum addressable memory.
+	 */
+	if (max_mapped_addr == (dram_end - 1))
+		memblock_set_current_limit(max_mapped_addr - 4096);
+
+	max_pfn = PFN_DOWN(dram_end);
 	max_low_pfn = max_pfn;
 	dma32_phys_limit = min(4UL * SZ_1G, (unsigned long)PFN_PHYS(max_low_pfn));
 	set_max_mapnr(max_low_pfn);

arch/riscv/mm/kasan_init.c

@@ -93,8 +93,8 @@ void __init kasan_init(void)
 								VMALLOC_END));
 
 	for_each_mem_range(i, &_start, &_end) {
-		void *start = (void *)_start;
-		void *end = (void *)_end;
+		void *start = (void *)__va(_start);
+		void *end = (void *)__va(_end);
 
 		if (start >= end)
 			break;

drivers/tty/serial/sifive.c

@@ -1000,6 +1000,7 @@ static int sifive_serial_probe(struct platform_device *pdev)
 	/* Set up clock divider */
 	ssp->clkin_rate = clk_get_rate(ssp->clk);
 	ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE;
+	ssp->port.uartclk = ssp->baud_rate * 16;
 	__ssp_update_div(ssp);
 
 	platform_set_drvdata(pdev, ssp);