wl1271: Security sequence number handling for TX (for WPA)

Add security sequence number handling to the driver TX data path needed
by WPA.
Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: NKalle Valo <kalle.valo@nokia.com>
Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/wl12xx/wl1271.h

@@ -337,6 +337,11 @@ struct wl1271 {
 	/* Pending TX frames */
 	struct sk_buff *tx_frames[16];
 
+	/* Security sequence number counters */
+	u8 tx_security_last_seq;
+	u16 tx_security_seq_16;
+	u32 tx_security_seq_32;
+
 	/* FW Rx counter */
 	u32 rx_counter;
 

drivers/net/wireless/wl12xx/wl1271_cmd.c

@@ -228,6 +228,10 @@ int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval,
 
 	join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET;
 
+	/* reset TX security counters */
+	wl->tx_security_last_seq = 0;
+	wl->tx_security_seq_16 = 0;
+	wl->tx_security_seq_32 = 0;
 
 	ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
 	if (ret < 0) {
@@ -759,7 +763,8 @@ int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
 }
 
 int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
-		       u8 key_size, const u8 *key, const u8 *addr)
+		       u8 key_size, const u8 *key, const u8 *addr,
+		       u32 tx_seq_32, u16 tx_seq_16)
 {
 	struct wl1271_cmd_set_keys *cmd;
 	int ret = 0;
@@ -777,12 +782,14 @@ int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
 	cmd->key_size = key_size;
 	cmd->key_type = key_type;
 
+	cmd->ac_seq_num16[0] = tx_seq_16;
+	cmd->ac_seq_num32[0] = tx_seq_32;
+
 	/* we have only one SSID profile */
 	cmd->ssid_profile = 0;
 
 	cmd->id = id;
 
-	/* FIXME: this is from wl1251, needs to be checked */
 	if (key_type == KEY_TKIP) {
 		/*
 		 * We get the key in the following form:

drivers/net/wireless/wl12xx/wl1271_cmd.h

@@ -49,7 +49,8 @@ int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid);
 int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len);
 int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id);
 int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
-		       u8 key_size, const u8 *key, const u8 *addr);
+		       u8 key_size, const u8 *key, const u8 *addr,
+		       u32 tx_seq_32, u16 tx_seq_16);
 
 enum wl1271_commands {
 	CMD_INTERROGATE     = 1,    /*use this to read information elements*/

drivers/net/wireless/wl12xx/wl1271_main.c

@@ -592,6 +592,9 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->tx_blocks_available = 0;
 	wl->tx_results_count = 0;
 	wl->tx_packets_count = 0;
+	wl->tx_security_last_seq = 0;
+	wl->tx_security_seq_16 = 0;
+	wl->tx_security_seq_32 = 0;
 	wl->time_offset = 0;
 	wl->session_counter = 0;
 	for (i = 0; i < NUM_TX_QUEUES; i++)
@@ -823,6 +826,8 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	struct wl1271 *wl = hw->priv;
 	const u8 *addr;
 	int ret;
+	u32 tx_seq_32 = 0;
+	u16 tx_seq_16 = 0;
 	u8 key_type;
 
 	static const u8 bcast_addr[ETH_ALEN] =
@@ -861,11 +866,15 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		key_type = KEY_TKIP;
 
 		key_conf->hw_key_idx = key_conf->keyidx;
+		tx_seq_32 = wl->tx_security_seq_32;
+		tx_seq_16 = wl->tx_security_seq_16;
 		break;
 	case ALG_CCMP:
 		key_type = KEY_AES;
 
 		key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		tx_seq_32 = wl->tx_security_seq_32;
+		tx_seq_16 = wl->tx_security_seq_16;
 		break;
 	default:
 		wl1271_error("Unknown key algo 0x%x", key_conf->alg);
@@ -879,7 +888,7 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		ret = wl1271_cmd_set_key(wl, KEY_ADD_OR_REPLACE,
 					 key_conf->keyidx, key_type,
 					 key_conf->keylen, key_conf->key,
-					 addr);
+					 addr, tx_seq_32, tx_seq_16);
 		if (ret < 0) {
 			wl1271_error("Could not add or replace key");
 			goto out_sleep;
@@ -890,7 +899,7 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		ret = wl1271_cmd_set_key(wl, KEY_REMOVE,
 					 key_conf->keyidx, key_type,
 					 key_conf->keylen, key_conf->key,
-					 addr);
+					 addr, 0, 0);
 		if (ret < 0) {
 			wl1271_error("Could not remove key");
 			goto out_sleep;

drivers/net/wireless/wl12xx/wl1271_tx.c

@@ -258,6 +258,7 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 	struct ieee80211_tx_info *info;
 	struct sk_buff *skb;
 	u32 header_len;
+	u16 seq;
 	int id = result->id;
 
 	/* check for id legality */
@@ -284,6 +285,16 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 	/* info->status.retry_count = result->ack_failures; */
 	wl->stats.retry_count += result->ack_failures;
 
+	/* update security sequence number */
+	seq = wl->tx_security_seq_16 +
+		(result->lsb_security_sequence_number -
+		 wl->tx_security_last_seq);
+	wl->tx_security_last_seq = result->lsb_security_sequence_number;
+
+	if (seq < wl->tx_security_seq_16)
+		wl->tx_security_seq_32++;
+	wl->tx_security_seq_16 = seq;
+
 	/* get header len */
 	if (info->control.hw_key &&
 	    info->control.hw_key->alg == ALG_TKIP)