ARM: dts: Kill off skeleton{64}.dtsi

Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.

The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NMatthias Brugger <matthias.bgg@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Acked-by: NAlexandre TORGUE <alexandre.torgue@st.com>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Acked-by: NVladimir Zapolskiy <vz@mleia.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Reviewed-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Reviewed-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/alphascale-asm9260.dtsi

@@ -4,10 +4,11 @@
  * Licensed under the X11 license or the GPL v2 (or later)
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/alphascale,asm9260.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&icoll>;
 
 	memory {

arch/arm/boot/dts/alpine.dtsi

@@ -25,12 +25,18 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton64.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	/* SOC compatibility */
 	compatible = "al,alpine";
 
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
 	/* CPU Configuration */
 	cpus {
 		#address-cells = <1>;

arch/arm/boot/dts/arm-realview-eb.dtsi

@@ -22,9 +22,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "arm,realview-eb";
 
 	chosen { };
@@ -38,6 +39,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};

arch/arm/boot/dts/arm-realview-pb1176.dts

@@ -23,9 +23,10 @@
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "ARM RealView PB1176";
 	compatible = "arm,realview-pb1176";
 
@@ -40,6 +41,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};

arch/arm/boot/dts/arm-realview-pb11mp.dts

@@ -23,9 +23,10 @@
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "ARM RealView PB11MPcore";
 	compatible = "arm,realview-pb11mp";
 
@@ -39,6 +40,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/*
 		 * The PB11MPCore has 512 MiB memory @ 0x70000000
 		 * and the first 256 are also remapped @ 0x00000000

arch/arm/boot/dts/arm-realview-pbx.dtsi

@@ -22,9 +22,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "arm,realview-pbx";
 
 	chosen { };
@@ -39,6 +40,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};

arch/arm/boot/dts/armada-38x.dtsi

@@ -9,13 +9,15 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 38x family SoC";
 	compatible = "marvell,armada380";
 

arch/arm/boot/dts/armada-39x.dtsi

@@ -7,13 +7,14 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Marvell Armada 39x family SoC";
 	compatible = "marvell,armada390";
 

arch/arm/boot/dts/artpec6.dtsi

@@ -43,9 +43,10 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/dma/nbpfaxi.h>
 #include <dt-bindings/clock/axis,artpec6-clkctrl.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "axis,artpec6";
 	interrupt-parent = <&intc>;
 

arch/arm/boot/dts/at91rm9200.dtsi

@@ -10,13 +10,14 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91RM9200 family SoC";
 	compatible = "atmel,at91rm9200";
 	interrupt-parent = <&aic>;
@@ -49,6 +50,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 

arch/arm/boot/dts/at91sam9260.dtsi

@@ -8,13 +8,14 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9260 family SoC";
 	compatible = "atmel,at91sam9260";
 	interrupt-parent = <&aic>;
@@ -46,6 +47,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -6,13 +6,14 @@
  * Licensed under GPLv2 only.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9261 family SoC";
 	compatible = "atmel,at91sam9261";
 	interrupt-parent = <&aic>;
@@ -43,6 +44,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x08000000>;
 	};
 

arch/arm/boot/dts/at91sam9263.dtsi

@@ -6,13 +6,14 @@
  * Licensed under GPLv2 only.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9263 family SoC";
 	compatible = "atmel,at91sam9263";
 	interrupt-parent = <&aic>;
@@ -45,6 +46,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x08000000>;
 	};
 

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -9,7 +9,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +16,8 @@
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9G45 family SoC";
 	compatible = "atmel,at91sam9g45";
 	interrupt-parent = <&aic>;
@@ -51,6 +52,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x70000000 0x10000000>;
 	};
 

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -7,7 +7,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -15,6 +14,8 @@
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9N12 SoC";
 	compatible = "atmel,at91sam9n12";
 	interrupt-parent = <&aic>;
@@ -47,6 +48,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x10000000>;
 	};
 

arch/arm/boot/dts/at91sam9rl.dtsi

@@ -7,7 +7,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -15,6 +14,8 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9RL family SoC";
 	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
 	interrupt-parent = <&aic>;
@@ -48,6 +49,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -9,7 +9,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +16,8 @@
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9x5 family SoC";
 	compatible = "atmel,at91sam9x5";
 	interrupt-parent = <&aic>;
@@ -49,6 +50,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x10000000>;
 	};
 

arch/arm/boot/dts/atlas6-evb.dts

@@ -15,6 +15,7 @@
 	compatible = "sirf,atlas6-cb", "sirf,atlas6";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
 	};
 

arch/arm/boot/dts/atlas6.dtsi

@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
 / {
 	compatible = "sirf,atlas6";
 	#address-cells = <1>;

arch/arm/boot/dts/atlas7.dtsi

@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
 / {
 	compatible = "sirf,atlas7";
 	#address-cells = <1>;

arch/arm/boot/dts/axm55xx.dtsi

@@ -12,9 +12,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/lsi,axm5516-clks.h>
 
-#include "skeleton64.dtsi"
-
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	interrupt-parent = <&gic>;
 
 	aliases {

arch/arm/boot/dts/bcm-cygnus.dtsi

@@ -34,9 +34,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/bcm-cygnus.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "brcm,cygnus";
 	model = "Broadcom Cygnus SoC";
 	interrupt-parent = <&gic>;
@@ -45,6 +45,11 @@
 		ethernet0 = &eth0;
 	};
 
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -34,9 +34,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/bcm-nsp.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "brcm,nsp";
 	model = "Broadcom Northstar Plus SoC";
 	interrupt-parent = <&gic>;

arch/arm/boot/dts/bcm11351.dtsi

@@ -16,9 +16,9 @@
 
 #include "dt-bindings/clock/bcm281xx.h"
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM11351 SoC";
 	compatible = "brcm,bcm11351";
 	interrupt-parent = <&gic>;

arch/arm/boot/dts/bcm21664-garnet.dts

@@ -22,6 +22,7 @@
 	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 

arch/arm/boot/dts/bcm21664.dtsi

@@ -16,9 +16,9 @@
 
 #include "dt-bindings/clock/bcm21664.h"
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM21664 SoC";
 	compatible = "brcm,bcm21664";
 	interrupt-parent = <&gic>;

arch/arm/boot/dts/bcm23550-sparrow.dts

@@ -46,6 +46,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 };

arch/arm/boot/dts/bcm23550.dtsi

@@ -36,9 +36,9 @@
 /* BCM23550 and BCM21664 have almost identical clocks */
 #include "dt-bindings/clock/bcm21664.h"
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM23550 SoC";
 	compatible = "brcm,bcm23550";
 	interrupt-parent = <&gic>;

arch/arm/boot/dts/bcm28155-ap.dts

@@ -22,6 +22,7 @@
 	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 

arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts

@@ -16,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts

@@ -16,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm47094-linksys-panamera.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts

@@ -16,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

arch/arm/boot/dts/bcm47094-netgear-r8500.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/bcm47189-luxul-xap-810.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/bcm47189-tenda-ac9.dts

@@ -16,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/bcm5301x.dtsi

@@ -13,9 +13,10 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
 	chipcommonA {

arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x68000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm53573.dtsi

@@ -7,9 +7,10 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
 	aliases {

arch/arm/boot/dts/bcm63138.dtsi

@@ -6,9 +6,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "brcm,bcm63138";
 	model = "Broadcom BCM63138 DSL SoC";
 	interrupt-parent = <&gic>;

arch/arm/boot/dts/bcm7445.dtsi

 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;

arch/arm/boot/dts/bcm947189acdbmr.dts

@@ -18,6 +18,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/bcm953012er.dts

@@ -40,6 +40,7 @@
 	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x8000000>;
 	};
 

arch/arm/boot/dts/bcm953012hr.dts

@@ -46,6 +46,7 @@
 	};
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x10000000>;
 	};
 };

arch/arm/boot/dts/bcm953012k.dts

@@ -44,6 +44,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x10000000>;
 	};
 };

arch/arm/boot/dts/cx92755.dtsi

@@ -44,9 +44,9 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "cnxt,cx92755";
 
 	interrupt-parent = <&intc>;

arch/arm/boot/dts/dove.dtsi

 // SPDX-License-Identifier: GPL-2.0
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
 	interrupt-parent = <&intc>;

arch/arm/boot/dts/ep7209.dtsi

@@ -6,11 +6,11 @@
 
 /dts-v1/;
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/clock/clps711x-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Cirrus Logic EP7209";
 	compatible = "cirrus,ep7209";
 

arch/arm/boot/dts/ep7211-edb7211.dts

@@ -12,6 +12,7 @@
 	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
 
 	memory {
+		device_type = "memory";
 		reg = <0xc0000000 0x02000000>;
 	};
 

arch/arm/boot/dts/integrator.dtsi

@@ -3,9 +3,15 @@
  * SoC core Device Tree for the ARM Integrator platforms
  */
 
-/include/ "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
 	core-module@10000000 {
 		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;

arch/arm/boot/dts/kirkwood.dtsi

 // SPDX-License-Identifier: GPL-2.0
-/include/ "skeleton.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "marvell,kirkwood";
 	interrupt-parent = <&intc>;
 

arch/arm/boot/dts/lpc32xx.dtsi

@@ -11,12 +11,12 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/clock/lpc32xx-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "nxp,lpc3220";
 	interrupt-parent = <&mic>;
 

arch/arm/boot/dts/ls1021a.dtsi

@@ -45,11 +45,12 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton64.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	compatible = "fsl,ls1021a";
 	interrupt-parent = <&gic>;
 
@@ -88,6 +89,11 @@
 		};
 	};
 
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
 	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;

arch/arm/boot/dts/meson.dtsi

@@ -47,9 +47,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-/include/ "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
 	L2: l2-cache-controller@c4200000 {

arch/arm/boot/dts/meson6-atv1200.dts

@@ -61,6 +61,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 };

arch/arm/boot/dts/meson8-minix-neo-x8.dts

@@ -57,6 +57,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 

arch/arm/boot/dts/meson8b-ec100.dts

@@ -23,6 +23,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 

arch/arm/boot/dts/meson8b-mxq.dts

@@ -60,6 +60,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 };

arch/arm/boot/dts/meson8b-odroidc1.dts

@@ -62,6 +62,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 

arch/arm/boot/dts/meson8m2-mxiii-plus.dts

@@ -28,6 +28,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 

arch/arm/boot/dts/mmp2-brownstone.dts

@@ -19,6 +19,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

arch/arm/boot/dts/mmp2.dtsi

@@ -7,10 +7,12 @@
  *  publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/marvell,mmp2.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart1;
 		serial1 = &uart2;

arch/arm/boot/dts/moxart.dtsi

@@ -5,10 +5,11 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "moxa,moxart";
 	model = "MOXART";
 	interrupt-parent = <&intc>;

arch/arm/boot/dts/mt2701-evb.dts

@@ -13,6 +13,7 @@
 	compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
 
 	memory {
+		device_type = "memory";
 		reg = <0 0x80000000 0 0x40000000>;
 	};
 

arch/arm/boot/dts/mt2701.dtsi

@@ -12,10 +12,11 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/memory/mt2701-larb-port.h>
 #include <dt-bindings/reset/mt2701-resets.h>
-#include "skeleton64.dtsi"
 #include "mt2701-pinfunc.h"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	compatible = "mediatek,mt2701";
 	interrupt-parent = <&cirq>;
 

arch/arm/boot/dts/mt6580-evbp1.dts

@@ -22,6 +22,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};
 };

arch/arm/boot/dts/mt6580.dtsi

@@ -7,7 +7,6 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
 	compatible = "mediatek,mt6580";

arch/arm/boot/dts/mt6589-aquaris5.dts

@@ -18,6 +18,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
 

arch/arm/boot/dts/mt6589.dtsi

@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "mediatek,mt6589";
 	interrupt-parent = <&sysirq>;
 

arch/arm/boot/dts/mt6592-evb.dts

@@ -13,7 +13,7 @@
 	compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
 };
-

arch/arm/boot/dts/mt6592.dtsi

@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "mediatek,mt6592";
 	interrupt-parent = <&sysirq>;
 

arch/arm/boot/dts/mt8127-moose.dts

@@ -13,6 +13,7 @@
 	compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
 
 	memory {
+		device_type = "memory";
 		reg = <0 0x80000000 0 0x40000000>;
 	};
 };

arch/arm/boot/dts/mt8127.dtsi

@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton64.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	compatible = "mediatek,mt8127";
 	interrupt-parent = <&sysirq>;
 

arch/arm/boot/dts/mt8135-evbp1.dts

@@ -13,6 +13,7 @@
 	compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
 
 	memory {
+		device_type = "memory";
 		reg = <0 0x80000000 0 0x40000000>;
 	};
 };

arch/arm/boot/dts/mt8135.dtsi

@@ -9,10 +9,11 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/mt8135-resets.h>
-#include "skeleton64.dtsi"
 #include "mt8135-pinfunc.h"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	compatible = "mediatek,mt8135";
 	interrupt-parent = <&sysirq>;
 

arch/arm/boot/dts/nspire.dtsi

@@ -9,9 +9,9 @@
  *
  */
 
-/include/ "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&intc>;
 
 	cpus {

arch/arm/boot/dts/orion5x-lacie-d2-network.dts

@@ -19,6 +19,7 @@
 	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x4000000>; /* 64 MB */
 	};
 

arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts

@@ -25,6 +25,7 @@
 	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x4000000>; /* 64 MB */
 	};
 

arch/arm/boot/dts/orion5x-lswsgl.dts

@@ -55,6 +55,7 @@
 	compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x8000000>; /* 128 MB */
 	};
 

arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts

@@ -19,6 +19,7 @@
 	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x4000000>; /* 64 MB */
 	};
 

arch/arm/boot/dts/orion5x-netgear-wnr854t.dts

@@ -21,6 +21,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x2000000>; /* 32 MB */
 	};
 

arch/arm/boot/dts/orion5x-rd88f5182-nas.dts

@@ -16,6 +16,7 @@
 	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x4000000>; /* 64 MB */
 	};
 

arch/arm/boot/dts/orion5x.dtsi

@@ -6,11 +6,11 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include "skeleton.dtsi"
-
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Marvell Orion5x SoC";
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;

arch/arm/boot/dts/ox810se.dtsi

@@ -6,11 +6,12 @@
  * Licensed under GPLv2 or later
  */
 
-/include/ "skeleton.dtsi"
 #include <dt-bindings/clock/oxsemi,ox810se.h>
 #include <dt-bindings/reset/oxsemi,ox810se.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "oxsemi,ox810se";
 
 	cpus {
@@ -25,6 +26,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* Max 256MB @ 0x48000000 */
 		reg = <0x48000000 0x10000000>;
 	};

arch/arm/boot/dts/ox820.dtsi

@@ -6,12 +6,13 @@
  * Licensed under GPLv2 or later
  */
 
-/include/ "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/oxsemi,ox820.h>
 #include <dt-bindings/reset/oxsemi,ox820.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "oxsemi,ox820";
 
 	cpus {
@@ -35,6 +36,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* Max 512MB @ 0x60000000 */
 		reg = <0x60000000 0x20000000>;
 	};

arch/arm/boot/dts/picoxcell-pc3x2.dtsi

@@ -10,7 +10,6 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-/include/ "skeleton.dtsi"
 / {
 	model = "Picochip picoXcell PC3X2";
 	compatible = "picochip,pc3x2";

arch/arm/boot/dts/picoxcell-pc3x3.dtsi

@@ -10,7 +10,6 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-/include/ "skeleton.dtsi"
 / {
 	model = "Picochip picoXcell PC3X3";
 	compatible = "picochip,pc3x3";

arch/arm/boot/dts/prima2-evb.dts

@@ -15,6 +15,7 @@
 	compatible = "sirf,prima2", "sirf,prima2-cb";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
 	};
 

arch/arm/boot/dts/prima2.dtsi

@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
 / {
 	compatible = "sirf,prima2";
 	#address-cells = <1>;

arch/arm/boot/dts/pxa168.dtsi

@@ -7,10 +7,12 @@
  *  publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/marvell,pxa168.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart1;
 		serial1 = &uart2;