media: i2c: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag

raspberrypi inclusion
category: feature
bugzilla: 50432

--------------------------------

The ov5647 subdev can generate control events, therefore set
the V4L2_SUBDEV_FL_HAS_EVENTS flag.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: NFang Yafen <yafen@iscas.ac.cn>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

drivers/media/i2c/ov5647.c

@@ -90,6 +90,8 @@ struct ov5647_mode {
 	struct v4l2_rect crop;
 
 	u64 pixel_rate;
+	/* HTS as defined in the register set (0x380C/0x380D) */
+	int hts;
 
 	struct regval_list		*reg_list;
 	unsigned int			num_regs;
@@ -106,6 +108,7 @@ struct ov5647 {
 	unsigned int			flags;
 	struct v4l2_ctrl_handler	ctrls;
 	struct v4l2_ctrl		*pixel_rate;
+	struct v4l2_ctrl		*hblank;
 	bool				write_mode_regs;
 };
 
@@ -605,6 +608,7 @@ static struct ov5647_mode supported_modes_8bit[] = {
 			.height = 960,
 		},
 		.pixel_rate = 77291670,
+		.hts = 1896,
 		ov5647_640x480_8bit,
 		ARRAY_SIZE(ov5647_640x480_8bit)
 	},
@@ -629,6 +633,7 @@ static struct ov5647_mode supported_modes_10bit[] = {
 			.height = 1944
 		},
 		.pixel_rate = 87500000,
+		.hts = 2844,
 		ov5647_2592x1944_10bit,
 		ARRAY_SIZE(ov5647_2592x1944_10bit)
 	},
@@ -651,6 +656,7 @@ static struct ov5647_mode supported_modes_10bit[] = {
 			.height = 1080,
 		},
 		.pixel_rate = 81666700,
+		.hts = 2416,
 		ov5647_1080p30_10bit,
 		ARRAY_SIZE(ov5647_1080p30_10bit)
 	},
@@ -672,6 +678,7 @@ static struct ov5647_mode supported_modes_10bit[] = {
 			.height = 1944,
 		},
 		.pixel_rate = 81666700,
+		.hts = 1896,
 		ov5647_2x2binned_10bit,
 		ARRAY_SIZE(ov5647_2x2binned_10bit)
 	},
@@ -694,6 +701,7 @@ static struct ov5647_mode supported_modes_10bit[] = {
 			.height = 1920,
 		},
 		.pixel_rate = 55000000,
+		.hts = 1852,
 		ov5647_640x480_10bit,
 		ARRAY_SIZE(ov5647_640x480_10bit)
 	},
@@ -1168,6 +1176,8 @@ static int ov5647_set_fmt(struct v4l2_subdev *sd,
 		 * If we have changed modes, write the I2C register list on
 		 * a stream_on().
 		 */
+		int hblank;
+
 		if (state->mode != mode)
 			state->write_mode_regs = true;
 		state->mode = mode;
@@ -1176,6 +1186,9 @@ static int ov5647_set_fmt(struct v4l2_subdev *sd,
 					 mode->pixel_rate,
 					 mode->pixel_rate, 1,
 					 mode->pixel_rate);
+		hblank = mode->hts - mode->format.width;
+		__v4l2_ctrl_modify_range(state->hblank, hblank, hblank, 1,
+					 hblank);
 	}
 
 	mutex_unlock(&state->lock);
@@ -1395,6 +1408,9 @@ static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_PIXEL_RATE:
 		/* Read-only, but we adjust it based on mode. */
 		break;
+	case V4L2_CID_HBLANK:
+		/* Read-only, but we adjust it based on mode. */
+		break;
 	default:
 		dev_info(&client->dev,
 			 "ctrl(id:0x%x,val:0x%x) is not handled\n",
@@ -1419,6 +1435,7 @@ static int ov5647_probe(struct i2c_client *client)
 	struct device_node *np = client->dev.of_node;
 	u32 xclk_freq;
 	struct v4l2_ctrl *ctrl;
+	int hblank;
 
 	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
 	if (!sensor)
@@ -1452,7 +1469,7 @@ static int ov5647_probe(struct i2c_client *client)
 	mutex_init(&sensor->lock);
 
 	/* Initialise controls. */
-	v4l2_ctrl_handler_init(&sensor->ctrls, 6);
+	v4l2_ctrl_handler_init(&sensor->ctrls, 7);
 	v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 			  V4L2_CID_AUTOGAIN,
 			  0,  /* min */
@@ -1495,6 +1512,13 @@ static int ov5647_probe(struct i2c_client *client)
 					       sensor->mode->pixel_rate, 1,
 					       sensor->mode->pixel_rate);
 
+	/* By default, HBLANK is read only, but it does change per mode */
+	hblank = sensor->mode->hts - sensor->mode->format.width;
+	sensor->hblank = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
+					   V4L2_CID_HBLANK, hblank, hblank, 1,
+					   hblank);
+	sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
 	if (sensor->ctrls.error) {
 		ret = sensor->ctrls.error;
 		dev_err(&client->dev, "%s control init failed (%d)\n",
@@ -1509,7 +1533,8 @@ static int ov5647_probe(struct i2c_client *client)
 	sd = &sensor->sd;
 	v4l2_i2c_subdev_init(sd, client, &ov5647_subdev_ops);
 	sensor->sd.internal_ops = &ov5647_subdev_internal_ops;
-	sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+			    V4L2_SUBDEV_FL_HAS_EVENTS;
 
 	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
 	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;