dt-bindings: PCI: mediatek: Update the Device tree bindings

There are two independent PCIe controllers in MT2712 and MT7622
platform. Each of them should contain an independent MSI domain.

In old dts architecture, MSI domain will be inherited from the root
bridge, and all of the devices will share the same MSI domain.
Hence that, the PCIe devices will not work properly if the irq number
which required is more than 32.

Split the PCIe node for MT2712 and MT7622 platform to comply with
the hardware design and fix MSI issue.

Link: https://lore.kernel.org/r/20210823032800.1660-2-chuanjia.liu@mediatek.comSigned-off-by: NChuanjia Liu <chuanjia.liu@mediatek.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh+dt@kernel.org>
Acked-by: NRyder Lee <ryder.lee@mediatek.com>

Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIECFG controller
+
+maintainers:
+  - Chuanjia Liu <chuanjia.liu@mediatek.com>
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The MediaTek PCIECFG controller controls some feature about
+  LTSSM, ASPM and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,generic-pciecfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pciecfg: pciecfg@1a140000 {
+        compatible = "mediatek,generic-pciecfg", "syscon";
+        reg = <0x1a140000 0x1000>;
+    };
+...

Documentation/devicetree/bindings/pci/mediatek-pcie.txt

@@ -8,7 +8,7 @@ Required properties:
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
 - device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe subsys and root ports.
+- reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
 - #address-cells: Address representation for root ports (must be 3)
 - #size-cells: Size representation for root ports (must be 2)
@@ -47,9 +47,12 @@ Required properties for MT7623/MT2701:
 - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
   number of root ports.
 
-Required properties for MT2712/MT7622:
+Required properties for MT2712/MT7622/MT7629:
 -interrupts: A list of interrupt outputs of the controller, must have one
 	     entry for each PCIe port
+- interrupt-names: Must include the following entries:
+	- "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
 
 In addition, the device tree node must have sub-nodes describing each
 PCIe port interface, having the following mandatory properties:
@@ -143,130 +146,143 @@ Examples for MT7623:
 
 Examples for MT2712:
 
-	pcie: pcie@11700000 {
+	pcie1: pcie@112ff000 {
 		compatible = "mediatek,mt2712-pcie";
 		device_type = "pci";
-		reg = <0 0x11700000 0 0x1000>,
-		      <0 0x112ff000 0 0x1000>;
-		reg-names = "port0", "port1";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
-			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
-			 <&pericfg CLK_PERI_PCIE0>,
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
 			 <&pericfg CLK_PERI_PCIE1>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
-			pcie_intc0: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
 	};
 
 Examples for MT7622:
 
-	pcie: pcie@1a140000 {
+	pcie0: pcie@1a143000 {
 		compatible = "mediatek,mt7622-pcie";
 		device_type = "pci";
-		reg = <0 0x1a140000 0 0x1000>,
-		      <0 0x1a143000 0 0x1000>,
-		      <0 0x1a145000 0 0x1000>;
-		reg-names = "subsys", "port0", "port1";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
 		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
-			 <&pciesys CLK_PCIE_P1_MAC_EN>,
 			 <&pciesys CLK_PCIE_P0_AHB_EN>,
-			 <&pciesys CLK_PCIE_P1_AHB_EN>,
 			 <&pciesys CLK_PCIE_P0_AUX_EN>,
-			 <&pciesys CLK_PCIE_P1_AUX_EN>,
 			 <&pciesys CLK_PCIE_P0_AXI_EN>,
-			 <&pciesys CLK_PCIE_P1_AXI_EN>,
 			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
-			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
-			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
-			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
-			pcie_intc0: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
 	};