ARM: suspend: fix CPU suspend code for !CONFIG_MMU configurations

The ARM CPU suspend code can be selected even for a !CONFIG_MMU
configuration. The resulting kernel will not compile and, even if it did,
would access undefined co-processor registers when executing.

This patch fixes the v6 and v7 CPU suspend code for the nommu case.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NJonathan Austin <jonathan.austin@arm.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> (commit_signer:1/3=33%)
CC: Santosh Shilimkar <santosh.shilimkar@ti.com> (commit_signer:1/3=33%)
CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

arch/arm/kernel/suspend.c

@@ -10,6 +10,42 @@
 extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
 extern void cpu_resume_mmu(void);
 
+#ifdef CONFIG_MMU
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+	struct mm_struct *mm = current->active_mm;
+	int ret;
+
+	if (!idmap_pgd)
+		return -EINVAL;
+
+	/*
+	 * Provide a temporary page table with an identity mapping for
+	 * the MMU-enable code, required for resuming.  On successful
+	 * resume (indicated by a zero return code), we need to switch
+	 * back to the correct page tables.
+	 */
+	ret = __cpu_suspend(arg, fn);
+	if (ret == 0) {
+		cpu_switch_mm(mm->pgd, mm);
+		local_flush_bp_all();
+		local_flush_tlb_all();
+	}
+
+	return ret;
+}
+#else
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+	return __cpu_suspend(arg, fn);
+}
+#define	idmap_pgd	NULL
+#endif
+
 /*
  * This is called by __cpu_suspend() to save the state, and do whatever
  * flushing is required to ensure that when the CPU goes to sleep we have
@@ -46,31 +82,3 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
 	outer_clean_range(virt_to_phys(save_ptr),
 			  virt_to_phys(save_ptr) + sizeof(*save_ptr));
 }
-
-/*
- * Hide the first two arguments to __cpu_suspend - these are an implementation
- * detail which platform code shouldn't have to know about.
- */
-int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
-{
-	struct mm_struct *mm = current->active_mm;
-	int ret;
-
-	if (!idmap_pgd)
-		return -EINVAL;
-
-	/*
-	 * Provide a temporary page table with an identity mapping for
-	 * the MMU-enable code, required for resuming.  On successful
-	 * resume (indicated by a zero return code), we need to switch
-	 * back to the correct page tables.
-	 */
-	ret = __cpu_suspend(arg, fn);
-	if (ret == 0) {
-		cpu_switch_mm(mm->pgd, mm);
-		local_flush_bp_all();
-		local_flush_tlb_all();
-	}
-
-	return ret;
-}

arch/arm/mm/proc-v6.S

@@ -140,8 +140,10 @@ ENTRY(cpu_v6_set_pte_ext)
 ENTRY(cpu_v6_do_suspend)
 	stmfd	sp!, {r4 - r9, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+#ifdef CONFIG_MMU
 	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r6, c2, c0, 1	@ Translation table base 1
+#endif
 	mrc	p15, 0, r7, c1, c0, 1	@ auxiliary control register
 	mrc	p15, 0, r8, c1, c0, 2	@ co-processor access control
 	mrc	p15, 0, r9, c1, c0, 0	@ control register
@@ -158,14 +160,16 @@ ENTRY(cpu_v6_do_resume)
 	mcr	p15, 0, ip, c13, c0, 1	@ set reserved context ID
 	ldmia	r0, {r4 - r9}
 	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+#ifdef CONFIG_MMU
 	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
 	ALT_SMP(orr	r1, r1, #TTB_FLAGS_SMP)
 	ALT_UP(orr	r1, r1, #TTB_FLAGS_UP)
 	mcr	p15, 0, r1, c2, c0, 0	@ Translation table base 0
 	mcr	p15, 0, r6, c2, c0, 1	@ Translation table base 1
+	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
+#endif
 	mcr	p15, 0, r7, c1, c0, 1	@ auxiliary control register
 	mcr	p15, 0, r8, c1, c0, 2	@ co-processor access control
-	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
 	mcr	p15, 0, ip, c7, c5, 4	@ ISB
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu

arch/arm/mm/proc-v7.S

@@ -98,9 +98,11 @@ ENTRY(cpu_v7_do_suspend)
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
 	stmia	r0!, {r4 - r5}
+#ifdef CONFIG_MMU
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 1	@ TTB 1
 	mrc	p15, 0, r11, c2, c0, 2	@ TTB control register
+#endif
 	mrc	p15, 0, r8, c1, c0, 0	@ Control register
 	mrc	p15, 0, r9, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
@@ -110,13 +112,14 @@ ENDPROC(cpu_v7_do_suspend)
 
 ENTRY(cpu_v7_do_resume)
 	mov	ip, #0
-	mcr	p15, 0, ip, c8, c7, 0	@ invalidate TLBs
 	mcr	p15, 0, ip, c7, c5, 0	@ invalidate I cache
 	mcr	p15, 0, ip, c13, c0, 1	@ set reserved context ID
 	ldmia	r0!, {r4 - r5}
 	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mcr	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
 	ldmia	r0, {r6 - r11}
+#ifdef CONFIG_MMU
+	mcr	p15, 0, ip, c8, c7, 0	@ invalidate TLBs
 	mcr	p15, 0, r6, c3, c0, 0	@ Domain ID
 #ifndef CONFIG_ARM_LPAE
 	ALT_SMP(orr	r1, r1, #TTB_FLAGS_SMP)
@@ -125,14 +128,15 @@ ENTRY(cpu_v7_do_resume)
 	mcr	p15, 0, r1, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r7, c2, c0, 1	@ TTB 1
 	mcr	p15, 0, r11, c2, c0, 2	@ TTB control register
-	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
-	teq	r4, r9			@ Is it already set?
-	mcrne	p15, 0, r9, c1, c0, 1	@ No, so write it
-	mcr	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	ldr	r4, =PRRR		@ PRRR
 	ldr	r5, =NMRR		@ NMRR
 	mcr	p15, 0, r4, c10, c2, 0	@ write PRRR
 	mcr	p15, 0, r5, c10, c2, 1	@ write NMRR
+#endif	/* CONFIG_MMU */
+	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
+	teq	r4, r9			@ Is it already set?
+	mcrne	p15, 0, r9, c1, c0, 1	@ No, so write it
+	mcr	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	isb
 	dsb
 	mov	r0, r8			@ control register