提交 a9b2937a 编写于 作者: M Moore, Eric Dean 提交者: James Bottomley

[SCSI] mptfusion - bus_type, change SCSI to SPI

This changes to SPI for the bus_type enumeration.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 7acec1e7
......@@ -313,13 +313,13 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa)
u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
if (ioc->bus_type == FC)
mpt_fc_log_info(ioc, log_info);
else if (ioc->bus_type == SCSI)
else if (ioc->bus_type == SPI)
mpt_sp_log_info(ioc, log_info);
else if (ioc->bus_type == SAS)
mpt_sas_log_info(ioc, log_info);
}
if (ioc_stat & MPI_IOCSTATUS_MASK) {
if (ioc->bus_type == SCSI &&
if (ioc->bus_type == SPI &&
cb_idx != mpt_stm_index &&
cb_idx != mpt_lan_index)
mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
......@@ -1376,7 +1376,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
}
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) {
ioc->prod_name = "LSI53C1030";
ioc->bus_type = SCSI;
ioc->bus_type = SPI;
/* 1030 Chip Fix. Disable Split transactions
* for PCIX. Set MOST bits to zero if Rev < C0( = 8).
*/
......@@ -1389,7 +1389,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
}
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) {
ioc->prod_name = "LSI53C1035";
ioc->bus_type = SCSI;
ioc->bus_type = SPI;
}
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) {
ioc->prod_name = "LSISAS1064";
......@@ -3042,7 +3042,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
/* Clear the internal flash bad bit - autoincrementing register,
* so must do two writes.
*/
if (ioc->bus_type == SCSI) {
if (ioc->bus_type == SPI) {
/*
* 1030 and 1035 H/W errata, workaround to access
* the ClearFlashBadSignatureBit
......@@ -3152,7 +3152,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
int cnt,cntdn;
dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name));
if (ioc->bus_type == SCSI) {
if (ioc->bus_type == SPI) {
/* Always issue a Msg Unit Reset first. This will clear some
* SCSI bus hang conditions.
*/
......@@ -3580,7 +3580,7 @@ initChainBuffers(MPT_ADAPTER *ioc)
dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n",
ioc->name, numSGE, num_sge, num_chain));
if (ioc->bus_type == SCSI)
if (ioc->bus_type == SPI)
num_chain *= MPT_SCSI_CAN_QUEUE;
else
num_chain *= MPT_FC_CAN_QUEUE;
......
......@@ -903,7 +903,7 @@ typedef struct _MPT_LOCAL_REPLY {
typedef enum {
FC,
SCSI,
SPI,
SAS
} BUS_TYPE;
......
......@@ -677,7 +677,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
sc->result = DID_RESET << 16;
/* GEM Workaround. */
if (ioc->bus_type == SCSI)
if (ioc->bus_type == SPI)
mptscsih_no_negotiate(hd, sc->device->id);
break;
......@@ -1403,7 +1403,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
SCpnt->host_scribble = NULL;
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
if (hd->ioc->bus_type == SCSI) {
if (hd->ioc->bus_type == SPI) {
int dvStatus = hd->ioc->spi_data.dvStatus[pTarget->target_id];
int issueCmd = 1;
......@@ -2183,7 +2183,7 @@ mptscsih_slave_alloc(struct scsi_device *device)
vdev->bus_id = device->channel;
vdev->raidVolume = 0;
hd->Targets[device->id] = vdev;
if (hd->ioc->bus_type == SCSI) {
if (hd->ioc->bus_type == SPI) {
if (hd->ioc->raid_data.isRaid & (1 << device->id)) {
vdev->raidVolume = 1;
ddvtprintk((KERN_INFO
......@@ -2225,7 +2225,7 @@ mptscsih_slave_destroy(struct scsi_device *device)
kfree(hd->Targets[target]);
hd->Targets[target] = NULL;
if (hd->ioc->bus_type == SCSI) {
if (hd->ioc->bus_type == SPI) {
if (mptscsih_is_phys_disk(hd->ioc, target)) {
hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
} else {
......@@ -2261,7 +2261,7 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
if (!(pTarget = hd->Targets[sdev->id]))
return 0;
if (hd->ioc->bus_type == SCSI) {
if (hd->ioc->bus_type == SPI) {
if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) {
if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES))
max_depth = 1;
......@@ -2503,9 +2503,9 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
/* 2. Chain Buffer initialization
*/
/* 4. Renegotiate to all devices, if SCSI
/* 4. Renegotiate to all devices, if SPI
*/
if (ioc->bus_type == SCSI) {
if (ioc->bus_type == SPI) {
dnegoprintk(("writeSDP1: ALL_IDS USE_NVRAM\n"));
mptscsih_writeSDP1(hd, 0, 0, MPT_SCSICFG_ALL_IDS | MPT_SCSICFG_USE_NVRAM);
}
......@@ -2534,7 +2534,7 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
/* 7. Set flag to force DV and re-read IOC Page 3
*/
if (ioc->bus_type == SCSI) {
if (ioc->bus_type == SPI) {
ioc->spi_data.forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
ddvtprintk(("Set reload IOC Pg3 Flag\n"));
}
......@@ -2576,7 +2576,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
break;
case MPI_EVENT_IOC_BUS_RESET: /* 04 */
case MPI_EVENT_EXT_BUS_RESET: /* 05 */
if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1))
if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
hd->soft_resets++;
break;
case MPI_EVENT_LOGOUT: /* 09 */
......@@ -2601,7 +2601,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
(pMpiEventDataRaid_t) pEvReply->Data;
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
/* Domain Validation Needed */
if (ioc->bus_type == SCSI &&
if (ioc->bus_type == SPI &&
pRaidEventData->ReasonCode ==
MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED)
mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum);
......@@ -2682,7 +2682,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *
indexed_lun = (lun % 32);
vdev->luns[lun_index] |= (1 << indexed_lun);
if (hd->ioc->bus_type == SCSI) {
if (hd->ioc->bus_type == SPI) {
if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
/* Treat all Processors as SAF-TE if
* command line option is set */
......@@ -3956,10 +3956,10 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
if (id == hostId)
id++;
/* Write SDP1 for all SCSI devices
/* Write SDP1 for all SPI devices
* Alloc memory and set up config buffer
*/
if (ioc->bus_type == SCSI) {
if (ioc->bus_type == SPI) {
if (ioc->spi_data.sdp1length > 0) {
pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev,
ioc->spi_data.sdp1length * 4, &cfg1_dma_addr);
......@@ -4101,8 +4101,8 @@ mptscsih_domainValidation(void *arg)
msleep(250);
/* DV only to SCSI adapters */
if (ioc->bus_type != SCSI)
/* DV only to SPI adapters */
if (ioc->bus_type != SPI)
continue;
/* Make sure everything looks ok */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册