Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  mac80211: check interface is down before type change
  cfg80211: fix NULL ptr deref
  libertas if_usb: Fix crash on 64-bit machines
  mac80211: fix reason code output endianness
  mac80211: fix addba timer
  ath9k: fix misplaced semicolon on rate control
  b43: Fix DMA TX bounce buffer copying
  mac80211: fix BSS leak
  rt73usb.c : more ids
  ipw2200: fix oops on missing firmware
  gre: Fix dev_addr clobbering for gretap
  sky2: set carrier off in probe
  net: fix sk_forward_alloc corruption
  pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card
  r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames
  ibmtr: possible Read buffer overflow?
  net: Fix RPF to work with policy routing
  net: fix kmemcheck annotations
  e1000e: rework disable K1 at 1000Mbps for 82577/82578
  e1000e: config PHY via software after resets
  ...

drivers/net/e100.c

@@ -1427,19 +1427,31 @@ static int e100_phy_init(struct nic *nic)
 	} else
 		DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
 
-	/* Isolate all the PHY ids */
-	for (addr = 0; addr < 32; addr++)
-		mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
-	/* Select the discovered PHY */
-	bmcr &= ~BMCR_ISOLATE;
-	mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
-
 	/* Get phy ID */
 	id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
 	id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
 	nic->phy = (u32)id_hi << 16 | (u32)id_lo;
 	DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
 
+	/* Select the phy and isolate the rest */
+	for (addr = 0; addr < 32; addr++) {
+		if (addr != nic->mii.phy_id) {
+			mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+		} else if (nic->phy != phy_82552_v) {
+			bmcr = mdio_read(netdev, addr, MII_BMCR);
+			mdio_write(netdev, addr, MII_BMCR,
+				bmcr & ~BMCR_ISOLATE);
+		}
+	}
+	/*
+	 * Workaround for 82552:
+	 * Clear the ISOLATE bit on selected phy_id last (mirrored on all
+	 * other phy_id's) using bmcr value from addr discovery loop above.
+	 */
+	if (nic->phy == phy_82552_v)
+		mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
+			bmcr & ~BMCR_ISOLATE);
+
 	/* Handle National tx phys */
 #define NCS_PHY_MODEL_MASK	0xFFF0FFFF
 	if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {

drivers/net/e1000e/defines.h

@@ -76,6 +76,7 @@
 /* Extended Device Control */
 #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
 #define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_SPD_BYPS  0x00008000 /* Speed Select Bypass */
 #define E1000_CTRL_EXT_RO_DIS    0x00020000 /* Relaxed Ordering disable */
 #define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
@@ -347,6 +348,7 @@
 /* Extended Configuration Control and Size */
 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP      0x00000020
 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE       0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE       0x00000008
 #define E1000_EXTCNF_CTRL_SWFLAG                 0x00000020
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK   0x00FF0000
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT          16

drivers/net/e1000e/e1000.h

@@ -141,6 +141,20 @@ struct e1000_info;
 #define HV_TNCRS_UPPER		PHY_REG(778, 29) /* Transmit with no CRS */
 #define HV_TNCRS_LOWER		PHY_REG(778, 30)
 
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS                      17
+#define BM_CS_STATUS_LINK_UP              0x0400
+#define BM_CS_STATUS_RESOLVED             0x0800
+#define BM_CS_STATUS_SPEED_MASK           0xC000
+#define BM_CS_STATUS_SPEED_1000           0x8000
+
+/* 82577 Mobile Phy Status Register */
+#define HV_M_STATUS                       26
+#define HV_M_STATUS_AUTONEG_COMPLETE      0x1000
+#define HV_M_STATUS_SPEED_MASK            0x0300
+#define HV_M_STATUS_SPEED_1000            0x0200
+#define HV_M_STATUS_LINK_UP               0x0040
+
 enum e1000_boards {
 	board_82571,
 	board_82572,

drivers/net/e1000e/hw.h

@@ -903,6 +903,7 @@ struct e1000_shadow_ram {
 struct e1000_dev_spec_ich8lan {
 	bool kmrn_lock_loss_workaround_enabled;
 	struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
+	bool nvm_k1_enabled;
 };
 
 struct e1000_hw {

drivers/net/e1000e/ich8lan.c

@@ -124,11 +124,25 @@
 
 #define SW_FLAG_TIMEOUT    1000 /* SW Semaphore flag timeout in milliseconds */
 
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR            PHY_REG(768, 26)
+#define HV_SMB_ADDR_PEC_EN     0x0200
+#define HV_SMB_ADDR_VALID      0x0080
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP                     0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK  0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+
 /* OEM Bits Phy Register */
 #define HV_OEM_BITS            PHY_REG(768, 25)
 #define HV_OEM_BITS_LPLU       0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS    0x0040 /* Gigabit Disable */
 #define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
 
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1  /* NVM Enable K1 bit */
+
 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
 union ich8_hws_flash_status {
@@ -208,6 +222,9 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
 static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -483,14 +500,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 		goto out;
 	}
 
-	if (hw->mac.type == e1000_pchlan) {
-		ret_val = e1000e_write_kmrn_reg(hw,
-		                                   E1000_KMRNCTRLSTA_K1_CONFIG,
-		                                   E1000_KMRNCTRLSTA_K1_ENABLE);
-		if (ret_val)
-			goto out;
-	}
-
 	/*
 	 * First we want to see if the MII Status Register reports
 	 * link.  If so, then we want to get the current speed/duplex
@@ -500,6 +509,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	if (ret_val)
 		goto out;
 
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000_k1_gig_workaround_hv(hw, link);
+		if (ret_val)
+			goto out;
+	}
+
 	if (!link)
 		goto out; /* No link detected */
 
@@ -793,6 +808,326 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
 	return 0;
 }
 
+/**
+ *  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
+ *  @hw:   pointer to the HW structure
+ *
+ *  SW should configure the LCD from the NVM extended configuration region
+ *  as a workaround for certain parts.
+ **/
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
+	s32 ret_val;
+	u16 word_addr, reg_data, reg_addr, phy_page = 0;
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		return ret_val;
+
+	/*
+	 * Initialize the PHY from the NVM on ICH platforms.  This
+	 * is needed due to an issue where the NVM configuration is
+	 * not properly autoloaded after power transitions.
+	 * Therefore, after each PHY reset, we will load the
+	 * configuration data out of the NVM manually.
+	 */
+	if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) ||
+		(hw->mac.type == e1000_pchlan)) {
+		struct e1000_adapter *adapter = hw->adapter;
+
+		/* Check if SW needs to configure the PHY */
+		if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
+		    (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
+		    (hw->mac.type == e1000_pchlan))
+			sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+		else
+			sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+
+		data = er32(FEXTNVM);
+		if (!(data & sw_cfg_mask))
+			goto out;
+
+		/* Wait for basic configuration completes before proceeding */
+		e1000_lan_init_done_ich8lan(hw);
+
+		/*
+		 * Make sure HW does not configure LCD from PHY
+		 * extended configuration before SW configuration
+		 */
+		data = er32(EXTCNF_CTRL);
+		if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+			goto out;
+
+		cnf_size = er32(EXTCNF_SIZE);
+		cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+		cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+		if (!cnf_size)
+			goto out;
+
+		cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+		cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
+		if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
+		    (hw->mac.type == e1000_pchlan)) {
+			/*
+			 * HW configures the SMBus address and LEDs when the
+			 * OEM and LCD Write Enable bits are set in the NVM.
+			 * When both NVM bits are cleared, SW will configure
+			 * them instead.
+			 */
+			data = er32(STRAP);
+			data &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+			reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;
+			reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+			ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,
+			                                        reg_data);
+			if (ret_val)
+				goto out;
+
+			data = er32(LEDCTL);
+			ret_val = e1000_write_phy_reg_hv_locked(hw,
+			                                        HV_LED_CONFIG,
+			                                        (u16)data);
+			if (ret_val)
+				goto out;
+		}
+		/* Configure LCD from extended configuration region. */
+
+		/* cnf_base_addr is in DWORD */
+		word_addr = (u16)(cnf_base_addr << 1);
+
+		for (i = 0; i < cnf_size; i++) {
+			ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
+			                           &reg_data);
+			if (ret_val)
+				goto out;
+
+			ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
+			                           1, &reg_addr);
+			if (ret_val)
+				goto out;
+
+			/* Save off the PHY page for future writes. */
+			if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
+				phy_page = reg_data;
+				continue;
+			}
+
+			reg_addr &= PHY_REG_MASK;
+			reg_addr |= phy_page;
+
+			ret_val = phy->ops.write_phy_reg_locked(hw,
+			                                    (u32)reg_addr,
+			                                    reg_data);
+			if (ret_val)
+				goto out;
+		}
+	}
+
+out:
+	hw->phy.ops.release_phy(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000_k1_gig_workaround_hv - K1 Si workaround
+ *  @hw:   pointer to the HW structure
+ *  @link: link up bool flag
+ *
+ *  If K1 is enabled for 1Gbps, the MAC might stall when transitioning
+ *  from a lower speed.  This workaround disables K1 whenever link is at 1Gig
+ *  If link is down, the function will restore the default K1 setting located
+ *  in the NVM.
+ **/
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
+{
+	s32 ret_val = 0;
+	u16 status_reg = 0;
+	bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
+
+	if (hw->mac.type != e1000_pchlan)
+		goto out;
+
+	/* Wrap the whole flow with the sw flag */
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		goto out;
+
+	/* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
+	if (link) {
+		if (hw->phy.type == e1000_phy_82578) {
+			ret_val = hw->phy.ops.read_phy_reg_locked(hw,
+			                                          BM_CS_STATUS,
+			                                          &status_reg);
+			if (ret_val)
+				goto release;
+
+			status_reg &= BM_CS_STATUS_LINK_UP |
+			              BM_CS_STATUS_RESOLVED |
+			              BM_CS_STATUS_SPEED_MASK;
+
+			if (status_reg == (BM_CS_STATUS_LINK_UP |
+			                   BM_CS_STATUS_RESOLVED |
+			                   BM_CS_STATUS_SPEED_1000))
+				k1_enable = false;
+		}
+
+		if (hw->phy.type == e1000_phy_82577) {
+			ret_val = hw->phy.ops.read_phy_reg_locked(hw,
+			                                          HV_M_STATUS,
+			                                          &status_reg);
+			if (ret_val)
+				goto release;
+
+			status_reg &= HV_M_STATUS_LINK_UP |
+			              HV_M_STATUS_AUTONEG_COMPLETE |
+			              HV_M_STATUS_SPEED_MASK;
+
+			if (status_reg == (HV_M_STATUS_LINK_UP |
+			                   HV_M_STATUS_AUTONEG_COMPLETE |
+			                   HV_M_STATUS_SPEED_1000))
+				k1_enable = false;
+		}
+
+		/* Link stall fix for link up */
+		ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+		                                           0x0100);
+		if (ret_val)
+			goto release;
+
+	} else {
+		/* Link stall fix for link down */
+		ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+		                                           0x4100);
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
+
+release:
+	hw->phy.ops.release_phy(hw);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_configure_k1_ich8lan - Configure K1 power state
+ *  @hw: pointer to the HW structure
+ *  @enable: K1 state to configure
+ *
+ *  Configure the K1 power state based on the provided parameter.
+ *  Assumes semaphore already acquired.
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ **/
+static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+{
+	s32 ret_val = 0;
+	u32 ctrl_reg = 0;
+	u32 ctrl_ext = 0;
+	u32 reg = 0;
+	u16 kmrn_reg = 0;
+
+	ret_val = e1000e_read_kmrn_reg_locked(hw,
+	                                     E1000_KMRNCTRLSTA_K1_CONFIG,
+	                                     &kmrn_reg);
+	if (ret_val)
+		goto out;
+
+	if (k1_enable)
+		kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
+	else
+		kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
+
+	ret_val = e1000e_write_kmrn_reg_locked(hw,
+	                                      E1000_KMRNCTRLSTA_K1_CONFIG,
+	                                      kmrn_reg);
+	if (ret_val)
+		goto out;
+
+	udelay(20);
+	ctrl_ext = er32(CTRL_EXT);
+	ctrl_reg = er32(CTRL);
+
+	reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+	reg |= E1000_CTRL_FRCSPD;
+	ew32(CTRL, reg);
+
+	ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
+	udelay(20);
+	ew32(CTRL, ctrl_reg);
+	ew32(CTRL_EXT, ctrl_ext);
+	udelay(20);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
+ *  @hw:       pointer to the HW structure
+ *  @d0_state: boolean if entering d0 or d3 device state
+ *
+ *  SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
+ *  collectively called OEM bits.  The OEM Write Enable bit and SW Config bit
+ *  in NVM determines whether HW should configure LPLU and Gbe Disable.
+ **/
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
+{
+	s32 ret_val = 0;
+	u32 mac_reg;
+	u16 oem_reg;
+
+	if (hw->mac.type != e1000_pchlan)
+		return ret_val;
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		return ret_val;
+
+	mac_reg = er32(EXTCNF_CTRL);
+	if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+		goto out;
+
+	mac_reg = er32(FEXTNVM);
+	if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
+		goto out;
+
+	mac_reg = er32(PHY_CTRL);
+
+	ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg);
+	if (ret_val)
+		goto out;
+
+	oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
+
+	if (d0_state) {
+		if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
+			oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+		if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
+			oem_reg |= HV_OEM_BITS_LPLU;
+	} else {
+		if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE)
+			oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+		if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU)
+			oem_reg |= HV_OEM_BITS_LPLU;
+	}
+	/* Restart auto-neg to activate the bits */
+	oem_reg |= HV_OEM_BITS_RESTART_AN;
+	ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
+
+out:
+	hw->phy.ops.release_phy(hw);
+
+	return ret_val;
+}
+
+
 /**
  *  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
  *  done after every PHY reset.
@@ -833,10 +1168,20 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 	ret_val = hw->phy.ops.acquire_phy(hw);
 	if (ret_val)
 		return ret_val;
+
 	hw->phy.addr = 1;
-	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+	if (ret_val)
+		goto out;
 	hw->phy.ops.release_phy(hw);
 
+	/*
+	 * Configure the K1 Si workaround during phy reset assuming there is
+	 * link so that it disables K1 if link is in 1Gbps.
+	 */
+	ret_val = e1000_k1_gig_workaround_hv(hw, true);
+
+out:
 	return ret_val;
 }
 
@@ -882,11 +1227,8 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 {
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i;
-	u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
-	s32 ret_val;
-	u16 reg, word_addr, reg_data, reg_addr, phy_page = 0;
+	s32 ret_val = 0;
+	u16 reg;
 
 	ret_val = e1000e_phy_hw_reset_generic(hw);
 	if (ret_val)
@@ -905,81 +1247,16 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 	if (hw->mac.type == e1000_pchlan)
 		e1e_rphy(hw, BM_WUC, &reg);
 
-	/*
-	 * Initialize the PHY from the NVM on ICH platforms.  This
-	 * is needed due to an issue where the NVM configuration is
-	 * not properly autoloaded after power transitions.
-	 * Therefore, after each PHY reset, we will load the
-	 * configuration data out of the NVM manually.
-	 */
-	if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) {
-		struct e1000_adapter *adapter = hw->adapter;
-
-		/* Check if SW needs configure the PHY */
-		if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
-		    (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M))
-			sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
-		else
-			sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
-
-		data = er32(FEXTNVM);
-		if (!(data & sw_cfg_mask))
-			return 0;
-
-		/* Wait for basic configuration completes before proceeding */
-		e1000_lan_init_done_ich8lan(hw);
-
-		/*
-		 * Make sure HW does not configure LCD from PHY
-		 * extended configuration before SW configuration
-		 */
-		data = er32(EXTCNF_CTRL);
-		if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
-			return 0;
-
-		cnf_size = er32(EXTCNF_SIZE);
-		cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
-		cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
-		if (!cnf_size)
-			return 0;
-
-		cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
-		cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
-
-		/* Configure LCD from extended configuration region. */
-
-		/* cnf_base_addr is in DWORD */
-		word_addr = (u16)(cnf_base_addr << 1);
-
-		for (i = 0; i < cnf_size; i++) {
-			ret_val = e1000_read_nvm(hw,
-						(word_addr + i * 2),
-						1,
-						&reg_data);
-			if (ret_val)
-				return ret_val;
-
-			ret_val = e1000_read_nvm(hw,
-						(word_addr + i * 2 + 1),
-						1,
-						&reg_addr);
-			if (ret_val)
-				return ret_val;
-
-			/* Save off the PHY page for future writes. */
-			if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
-				phy_page = reg_data;
-				continue;
-			}
-
-			reg_addr |= phy_page;
+	/* Configure the LCD with the extended configuration region in NVM */
+	ret_val = e1000_sw_lcd_config_ich8lan(hw);
+	if (ret_val)
+		goto out;
 
-			ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data);
-			if (ret_val)
-				return ret_val;
-		}
-	}
+	/* Configure the LCD with the OEM bits in NVM */
+	if (hw->mac.type == e1000_pchlan)
+		ret_val = e1000_oem_bits_config_ich8lan(hw, true);
 
+out:
 	return 0;
 }
 
@@ -2306,6 +2583,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 {
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 	u16 reg;
 	u32 ctrl, icr, kab;
 	s32 ret_val;
@@ -2341,6 +2619,18 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 		ew32(PBS, E1000_PBS_16K);
 	}
 
+	if (hw->mac.type == e1000_pchlan) {
+		/* Save the NVM K1 bit setting*/
+		ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &reg);
+		if (ret_val)
+			return ret_val;
+
+		if (reg & E1000_NVM_K1_ENABLE)
+			dev_spec->nvm_k1_enabled = true;
+		else
+			dev_spec->nvm_k1_enabled = false;
+	}
+
 	ctrl = er32(CTRL);
 
 	if (!e1000_check_reset_block(hw)) {
@@ -2386,6 +2676,15 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	if (hw->mac.type == e1000_pchlan)
 		e1e_rphy(hw, BM_WUC, &reg);
 
+	ret_val = e1000_sw_lcd_config_ich8lan(hw);
+	if (ret_val)
+		goto out;
+
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+		if (ret_val)
+			goto out;
+	}
 	/*
 	 * For PCH, this write will make sure that any noise
 	 * will be detected as a CRC error and be dropped rather than show up
@@ -2404,6 +2703,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	if (hw->mac.type == e1000_pchlan)
 		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
 
+out:
 	return ret_val;
 }
 
@@ -2708,14 +3008,6 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
 	if (ret_val)
 		return ret_val;
 
-	if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
-		ret_val = e1000e_write_kmrn_reg(hw,
-		                                  E1000_KMRNCTRLSTA_K1_CONFIG,
-		                                  E1000_KMRNCTRLSTA_K1_DISABLE);
-		if (ret_val)
-			return ret_val;
-	}
-
 	if ((hw->mac.type == e1000_ich8lan) &&
 	    (hw->phy.type == e1000_phy_igp_3) &&
 	    (*speed == SPEED_1000)) {

drivers/net/e1000e/phy.c

@@ -95,13 +95,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
 /* BM PHY Copper Specific Control 1 */
 #define BM_CS_CTRL1                       16
 
-/* BM PHY Copper Specific Status */
-#define BM_CS_STATUS                      17
-#define BM_CS_STATUS_LINK_UP              0x0400
-#define BM_CS_STATUS_RESOLVED             0x0800
-#define BM_CS_STATUS_SPEED_MASK           0xC000
-#define BM_CS_STATUS_SPEED_1000           0x8000
-
 #define HV_MUX_DATA_CTRL               PHY_REG(776, 16)
 #define HV_MUX_DATA_CTRL_GEN_TO_MAC    0x0400
 #define HV_MUX_DATA_CTRL_FORCE_SPEED   0x0004
@@ -563,7 +556,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
 }
 
 /**
- *  e1000_read_kmrn_reg_locked -  Read kumeran register
+ *  e1000e_read_kmrn_reg_locked -  Read kumeran register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
  *  @data: pointer to the read data
@@ -572,7 +565,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
  *  information retrieved is stored in data.
  *  Assumes semaphore already acquired.
  **/
-s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
 {
 	return __e1000_read_kmrn_reg(hw, offset, data, true);
 }
@@ -631,7 +624,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
 }
 
 /**
- *  e1000_write_kmrn_reg_locked -  Write kumeran register
+ *  e1000e_write_kmrn_reg_locked -  Write kumeran register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to write to
  *  @data: data to write at register offset
@@ -639,7 +632,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
  *  Write the data to PHY register at the offset using the kumeran interface.
  *  Assumes semaphore already acquired.
  **/
-s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
 {
 	return __e1000_write_kmrn_reg(hw, offset, data, true);
 }

drivers/net/pcmcia/pcnet_cs.c

@@ -1760,7 +1760,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
-	PCMCIA_DEVICE_CIS_PROD_ID12("PMX   ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("PMX   ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
 	PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
 	PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",

drivers/net/r8169.c

@@ -3379,7 +3379,7 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
 static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
 {
 	/* Low hurts. Let's disable the filtering. */
-	RTL_W16(RxMaxSize, rx_buf_sz);
+	RTL_W16(RxMaxSize, rx_buf_sz + 1);
 }
 
 static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)

drivers/net/sky2.c

@@ -4538,6 +4538,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		goto err_out_free_netdev;
 	}
 
+	netif_carrier_off(dev);
+
 	netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
 
 	err = request_irq(pdev->irq, sky2_intr,

drivers/net/tokenring/ibmtr.c

@@ -1144,9 +1144,16 @@ static void dir_open_adapter (struct net_device *dev)
                 } else {
 			char **prphase = printphase;
 			char **prerror = printerror;
+			int pnr = err / 16 - 1;
+			int enr = err % 16 - 1;
 			DPRINTK("TR Adapter misc open failure, error code = ");
-			printk("0x%x, Phase: %s, Error: %s\n",
-				err, prphase[err/16 -1], prerror[err%16 -1]);
+			if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) ||
+					enr < 0 ||
+					enr >= ARRAY_SIZE(printerror))
+				printk("0x%x, invalid Phase/Error.", err);
+			else
+				printk("0x%x, Phase: %s, Error: %s\n", err,
+						prphase[pnr], prerror[enr]);
 			printk(" retrying after %ds delay...\n",
 					TR_RETRY_INTERVAL/HZ);
                 }

drivers/net/wireless/ath/ath9k/rc.c

@@ -679,7 +679,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
 		return rate;
 
 	if (rate_table->info[rate].valid_single_stream &&
-	    !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG));
+	    !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG))
 		return rate;
 
 	/* This should not happen */

drivers/net/wireless/b43/dma.c

@@ -1157,8 +1157,9 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot)
 }
 
 static int dma_tx_fragment(struct b43_dmaring *ring,
-			   struct sk_buff *skb)
+			   struct sk_buff **in_skb)
 {
+	struct sk_buff *skb = *in_skb;
 	const struct b43_dma_ops *ops = ring->ops;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	u8 *header;
@@ -1224,8 +1225,14 @@ static int dma_tx_fragment(struct b43_dmaring *ring,
 		}
 
 		memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
+		memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb));
+		bounce_skb->dev = skb->dev;
+		skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb));
+		info = IEEE80211_SKB_CB(bounce_skb);
+
 		dev_kfree_skb_any(skb);
 		skb = bounce_skb;
+		*in_skb = bounce_skb;
 		meta->skb = skb;
 		meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
 		if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
@@ -1355,7 +1362,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	 * static, so we don't need to store it per frame. */
 	ring->queue_prio = skb_get_queue_mapping(skb);
 
-	err = dma_tx_fragment(ring, skb);
+	/* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing
+	 * into the skb data or cb now. */
+	hdr = NULL;
+	info = NULL;
+	err = dma_tx_fragment(ring, &skb);
 	if (unlikely(err == -ENOKEY)) {
 		/* Drop this packet, as we don't have the encryption key
 		 * anymore and must not transmit it unencrypted. */

drivers/net/wireless/ipw2x00/ipw2100.c

@@ -6325,8 +6325,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 
       fail:
 	if (dev) {
-		if (registered)
+		if (registered) {
+			unregister_ieee80211(priv->ieee);
 			unregister_netdev(dev);
+		}
 
 		ipw2100_hw_stop_adapter(priv);
 
@@ -6383,6 +6385,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
 		/* Unregister the device first - this results in close()
 		 * being called if the device is open.  If we free storage
 		 * first, then close() will crash. */
+		unregister_ieee80211(priv->ieee);
 		unregister_netdev(dev);
 
 		/* ipw2100_down will ensure that there is no more pending work

drivers/net/wireless/ipw2x00/ipw2200.c

@@ -11822,6 +11822,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 		if (err) {
 			IPW_ERROR("Failed to register promiscuous network "
 				  "device (error %d).\n", err);
+			unregister_ieee80211(priv->ieee);
 			unregister_netdev(priv->net_dev);
 			goto out_remove_sysfs;
 		}
@@ -11872,6 +11873,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev)
 
 	mutex_unlock(&priv->mutex);
 
+	unregister_ieee80211(priv->ieee);
 	unregister_netdev(priv->net_dev);
 
 	if (priv->rxq) {

drivers/net/wireless/ipw2x00/libipw.h

@@ -1020,6 +1020,7 @@ static inline int libipw_is_cck_rate(u8 rate)
 /* ieee80211.c */
 extern void free_ieee80211(struct net_device *dev, int monitor);
 extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
+extern void unregister_ieee80211(struct libipw_device *ieee);
 extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
 
 extern void libipw_networks_age(struct libipw_device *ieee,

drivers/net/wireless/ipw2x00/libipw_module.c

@@ -235,16 +235,19 @@ void free_ieee80211(struct net_device *dev, int monitor)
 	libipw_networks_free(ieee);
 
 	/* free cfg80211 resources */
-	if (!monitor) {
-		wiphy_unregister(ieee->wdev.wiphy);
-		kfree(ieee->a_band.channels);
-		kfree(ieee->bg_band.channels);
+	if (!monitor)
 		wiphy_free(ieee->wdev.wiphy);
-	}
 
 	free_netdev(dev);
 }
 
+void unregister_ieee80211(struct libipw_device *ieee)
+{
+	wiphy_unregister(ieee->wdev.wiphy);
+	kfree(ieee->a_band.channels);
+	kfree(ieee->bg_band.channels);
+}
+
 #ifdef CONFIG_LIBIPW_DEBUG
 
 static int debug = 0;
@@ -330,3 +333,4 @@ module_init(libipw_init);
 
 EXPORT_SYMBOL(alloc_ieee80211);
 EXPORT_SYMBOL(free_ieee80211);
+EXPORT_SYMBOL(unregister_ieee80211);

drivers/net/wireless/libertas/if_usb.c

@@ -508,7 +508,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
 	/* Fill the receive configuration URB and initialise the Rx call back */
 	usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
 			  usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
-			  (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
+			  skb->data + IPFIELD_ALIGN_OFFSET,
 			  MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
 			  cardp);
 

drivers/net/wireless/rt2x00/rt73usb.c

@@ -2389,10 +2389,13 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* MSI */
+	{ USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Ovislink */
+	{ USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Ralink */
 	{ USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
@@ -2420,6 +2423,8 @@ static struct usb_device_id rt73usb_device_table[] = {
 	/* Planex */
 	{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* WideTell */
+	{ USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Zcom */
 	{ USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* ZyXEL */

drivers/serial/serial_cs.c

@@ -879,10 +879,10 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
-	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"),  /* Sierra Wireless AC850 3G Network Adapter R1 */
-	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"),	/* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
-	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
-	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
+	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
+	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"),  /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
+	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
+	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
 	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),

firmware/Makefile

@@ -69,11 +69,13 @@ fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
 fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
 fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
 				     cis/DP83903.cis cis/NE2K.cis \
-				     cis/tamarack.cis
+				     cis/tamarack.cis cis/PE-200.cis
 fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
 fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
 fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
-				       cis/COMpad2.cis cis/COMpad4.cis
+				       cis/COMpad2.cis cis/COMpad4.cis \
+				       cis/SW_555_SER.cis cis/SW_7xx_SER.cis \
+				       cis/SW_8xx_SER.cis
 fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
 fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
 				      advansys/3550.bin advansys/38C0800.bin

firmware/WHENCE

@@ -600,6 +600,7 @@ File: cis/LA-PCM.cis
       cis/DP83903.cis
       cis/NE2K.cis
       cis/tamarack.cis
+      cis/PE-200.cis
 
 Licence: GPL
 
@@ -633,6 +634,9 @@ File: cis/MT5634ZLX.cis
       cis/RS-COM-2P.cis
       cis/COMpad2.cis
       cis/COMpad4.cis
+      cis/SW_555_SER.cis
+      cis/SW_7xx_SER.cis
+      cis/SW_8xx_SER.cis
 
 Licence: GPL
 

firmware/cis/PE-200.cis.ihex

+:1000000001030000FF151E0401504D582020200060
+:1000100050452D3230300045544845524E4554002D
+:1000200052303100FF210206031A050101000101CF
+:100030001B0EC181190155E051000F100F30FFFF59
+:040040001400FF00A9
+:00000001FF
+#
+# Replacement CIS for PE-200 ethernet card
+#

firmware/cis/SW_555_SER.cis.ihex

+:100000000101FF17034100FF20043F0110072102F7
+:100010000200152A070053696572726120576972E0
+:10002000656C657373004169724361726420353594
+:1000300035004135353500526576203100FF1A050F
+:1000400001030007731B0BE00118A360F8030730DE
+:10005000BC3F1B08A10108A360F802071B08A2010E
+:1000600008A360E803071B08A30108A360E80207D0
+:0A0070001B04A40108231400FF0084
+:00000001FF
+#
+# Replacement CIS for AC555 provided by Sierra Wireless
+#

firmware/cis/SW_7xx_SER.cis.ihex

+:100000000101FF17034100FF2004920110072102A4
+:1000100002001537070053696572726120576972D3
+:10002000656C6573730041433731302F4143373579
+:10003000300047505253204E6574776F726B2041E9
+:1000400064617074657200523100FF1A050103008B
+:1000500007731B10E00119784D555D25A360F80367
+:100060000730BC861B08A10108A360F802071B0823
+:10007000A20108A360E803071B08A30108A360E826
+:0C00800002071B04A40108231400FF0069
+:00000001FF
+#
+# Replacement CIS for AC7xx provided by Sierra Wireless
+#

firmware/cis/SW_8xx_SER.cis.ihex

+:100000000101FF17034100FF2004920110072102A4
+:100010000200152F070053696572726120576972DB
+:10002000656C657373004143383530003347204EAB
+:100030006574776F726B20416461707465720052F1
+:100040003100FF1A0501030007731B10E001197846
+:100050004D555D25A360F8480730BC861B08A101FB
+:1000600008A360F847071B08A20108A360E8480737
+:100070001B08A30108A360E847071B04A401082389
+:040080001400FF0069
+:00000001FF
+#
+# Replacement CIS for AC8xx provided by Sierra Wireless
+#

include/linux/skbuff.h

@@ -354,8 +354,8 @@ struct sk_buff {
 				ipvs_property:1,
 				peeked:1,
 				nf_trace:1;
+	__be16			protocol:16;
 	kmemcheck_bitfield_end(flags1);
-	__be16			protocol;
 
 	void			(*destructor)(struct sk_buff *skb);
 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
@@ -367,7 +367,6 @@ struct sk_buff {
 #endif
 
 	int			iif;
-	__u16			queue_mapping;
 #ifdef CONFIG_NET_SCHED
 	__u16			tc_index;	/* traffic control index */
 #ifdef CONFIG_NET_CLS_ACT
@@ -376,6 +375,7 @@ struct sk_buff {
 #endif
 
 	kmemcheck_bitfield_begin(flags2);
+	__u16			queue_mapping:16;
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	__u8			ndisc_nodetype:2;
 #endif
@@ -1757,6 +1757,8 @@ extern int	       skb_copy_datagram_const_iovec(const struct sk_buff *from,
 						     int to_offset,
 						     int size);
 extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
+extern void	       skb_free_datagram_locked(struct sock *sk,
+						struct sk_buff *skb);
 extern int	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
 					 unsigned int flags);
 extern __wsum	       skb_checksum(const struct sk_buff *skb, int offset,

include/net/ip_fib.h

@@ -210,7 +210,8 @@ extern struct fib_table *fib_get_table(struct net *net, u32 id);
 extern const struct nla_policy rtm_ipv4_policy[];
 extern void		ip_fib_init(void);
 extern int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
-			       struct net_device *dev, __be32 *spec_dst, u32 *itag);
+			       struct net_device *dev, __be32 *spec_dst,
+			       u32 *itag, u32 mark);
 extern void fib_select_default(struct net *net, const struct flowi *flp,
 			       struct fib_result *res);
 

net/core/datagram.c

@@ -224,6 +224,15 @@ void skb_free_datagram(struct sock *sk, struct sk_buff *skb)
 	consume_skb(skb);
 	sk_mem_reclaim_partial(sk);
 }
+EXPORT_SYMBOL(skb_free_datagram);
+
+void skb_free_datagram_locked(struct sock *sk, struct sk_buff *skb)
+{
+	lock_sock(sk);
+	skb_free_datagram(sk, skb);
+	release_sock(sk);
+}
+EXPORT_SYMBOL(skb_free_datagram_locked);
 
 /**
  *	skb_kill_datagram - Free a datagram skbuff forcibly
@@ -752,5 +761,4 @@ unsigned int datagram_poll(struct file *file, struct socket *sock,
 EXPORT_SYMBOL(datagram_poll);
 EXPORT_SYMBOL(skb_copy_and_csum_datagram_iovec);
 EXPORT_SYMBOL(skb_copy_datagram_iovec);
-EXPORT_SYMBOL(skb_free_datagram);
 EXPORT_SYMBOL(skb_recv_datagram);

net/ipv4/fib_frontend.c

@@ -229,14 +229,17 @@ unsigned int inet_dev_addr_type(struct net *net, const struct net_device *dev,
  */
 
 int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
-			struct net_device *dev, __be32 *spec_dst, u32 *itag)
+			struct net_device *dev, __be32 *spec_dst,
+			u32 *itag, u32 mark)
 {
 	struct in_device *in_dev;
 	struct flowi fl = { .nl_u = { .ip4_u =
 				      { .daddr = src,
 					.saddr = dst,
 					.tos = tos } },
+			    .mark = mark,
 			    .iif = oif };
+
 	struct fib_result res;
 	int no_addr, rpf;
 	int ret;

net/ipv4/ip_gre.c

@@ -1464,7 +1464,7 @@ static void ipgre_tap_setup(struct net_device *dev)
 
 	ether_setup(dev);
 
-	dev->netdev_ops		= &ipgre_netdev_ops;
+	dev->netdev_ops		= &ipgre_tap_netdev_ops;
 	dev->destructor 	= free_netdev;
 
 	dev->iflink		= 0;
@@ -1525,25 +1525,29 @@ static int ipgre_changelink(struct net_device *dev, struct nlattr *tb[],
 		if (t->dev != dev)
 			return -EEXIST;
 	} else {
-		unsigned nflags = 0;
-
 		t = nt;
 
-		if (ipv4_is_multicast(p.iph.daddr))
-			nflags = IFF_BROADCAST;
-		else if (p.iph.daddr)
-			nflags = IFF_POINTOPOINT;
+		if (dev->type != ARPHRD_ETHER) {
+			unsigned nflags = 0;
 
-		if ((dev->flags ^ nflags) &
-		    (IFF_POINTOPOINT | IFF_BROADCAST))
-			return -EINVAL;
+			if (ipv4_is_multicast(p.iph.daddr))
+				nflags = IFF_BROADCAST;
+			else if (p.iph.daddr)
+				nflags = IFF_POINTOPOINT;
+
+			if ((dev->flags ^ nflags) &
+			    (IFF_POINTOPOINT | IFF_BROADCAST))
+				return -EINVAL;
+		}
 
 		ipgre_tunnel_unlink(ign, t);
 		t->parms.iph.saddr = p.iph.saddr;
 		t->parms.iph.daddr = p.iph.daddr;
 		t->parms.i_key = p.i_key;
-		memcpy(dev->dev_addr, &p.iph.saddr, 4);
-		memcpy(dev->broadcast, &p.iph.daddr, 4);
+		if (dev->type != ARPHRD_ETHER) {
+			memcpy(dev->dev_addr, &p.iph.saddr, 4);
+			memcpy(dev->broadcast, &p.iph.daddr, 4);
+		}
 		ipgre_tunnel_link(ign, t);
 		netdev_state_change(dev);
 	}

net/ipv4/route.c

@@ -1854,7 +1854,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 			goto e_inval;
 		spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
 	} else if (fib_validate_source(saddr, 0, tos, 0,
-					dev, &spec_dst, &itag) < 0)
+					dev, &spec_dst, &itag, 0) < 0)
 		goto e_inval;
 
 	rth = dst_alloc(&ipv4_dst_ops);
@@ -1967,7 +1967,7 @@ static int __mkroute_input(struct sk_buff *skb,
 
 
 	err = fib_validate_source(saddr, daddr, tos, FIB_RES_OIF(*res),
-				  in_dev->dev, &spec_dst, &itag);
+				  in_dev->dev, &spec_dst, &itag, skb->mark);
 	if (err < 0) {
 		ip_handle_martian_source(in_dev->dev, in_dev, skb, daddr,
 					 saddr);
@@ -2141,7 +2141,7 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 		int result;
 		result = fib_validate_source(saddr, daddr, tos,
 					     net->loopback_dev->ifindex,
-					     dev, &spec_dst, &itag);
+					     dev, &spec_dst, &itag, skb->mark);
 		if (result < 0)
 			goto martian_source;
 		if (result)
@@ -2170,7 +2170,7 @@ out:	return err;
 		spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
 	else {
 		err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst,
-					  &itag);
+					  &itag, skb->mark);
 		if (err < 0)
 			goto martian_source;
 		if (err)

net/ipv4/udp.c

@@ -999,9 +999,7 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		err = ulen;
 
 out_free:
-	lock_sock(sk);
-	skb_free_datagram(sk, skb);
-	release_sock(sk);
+	skb_free_datagram_locked(sk, skb);
 out:
 	return err;
 

net/ipv6/udp.c

@@ -288,9 +288,7 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk,
 		err = ulen;
 
 out_free:
-	lock_sock(sk);
-	skb_free_datagram(sk, skb);
-	release_sock(sk);
+	skb_free_datagram_locked(sk, skb);
 out:
 	return err;
 

net/mac80211/agg-tx.c

@@ -666,26 +666,25 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 
 	state = &sta->ampdu_mlme.tid_state_tx[tid];
 
+	del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
+
 	spin_lock_bh(&sta->lock);
 
-	if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
-		spin_unlock_bh(&sta->lock);
-		return;
-	}
+	if (!(*state & HT_ADDBA_REQUESTED_MSK))
+		goto timer_still_needed;
 
 	if (mgmt->u.action.u.addba_resp.dialog_token !=
 		sta->ampdu_mlme.tid_tx[tid]->dialog_token) {
-		spin_unlock_bh(&sta->lock);
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
-		return;
+		goto timer_still_needed;
 	}
 
-	del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
+
 	if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
 			== WLAN_STATUS_SUCCESS) {
 		u8 curstate = *state;
@@ -699,5 +698,11 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 	} else {
 		___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR);
 	}
+
+	goto out;
+
+ timer_still_needed:
+	add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
+ out:
 	spin_unlock_bh(&sta->lock);
 }

net/mac80211/cfg.c

@@ -72,6 +72,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy,
 	struct ieee80211_sub_if_data *sdata;
 	int ret;
 
+	if (netif_running(dev))
+		return -EBUSY;
+
 	if (!nl80211_type_check(type))
 		return -EINVAL;
 
@@ -81,9 +84,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy,
 	if (ret)
 		return ret;
 
-	if (netif_running(sdata->dev))
-		return -EBUSY;
-
 	if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
 		ieee80211_sdata_set_mesh_id(sdata,
 					    params->mesh_id_len,

net/mac80211/ht.c

@@ -153,7 +153,7 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
 	if (net_ratelimit())
 		printk(KERN_DEBUG "delba from %pM (%s) tid %d reason code %d\n",
 			mgmt->sa, initiator ? "initiator" : "recipient", tid,
-			mgmt->u.action.u.delba.reason_code);
+			le16_to_cpu(mgmt->u.action.u.delba.reason_code));
 #endif /* CONFIG_MAC80211_HT_DEBUG */
 
 	if (initiator == WLAN_BACK_INITIATOR)

net/mac80211/ibss.c

@@ -73,6 +73,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_mgmt *mgmt;
 	u8 *pos;
 	struct ieee80211_supported_band *sband;
+	struct cfg80211_bss *bss;
 	u32 bss_change;
 	u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
 
@@ -177,8 +178,9 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 	mod_timer(&ifibss->timer,
 		  round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
 
-	cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel,
-				  mgmt, skb->len, 0, GFP_KERNEL);
+	bss = cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel,
+					mgmt, skb->len, 0, GFP_KERNEL);
+	cfg80211_put_bss(bss);
 	cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL);
 }
 

net/sunrpc/svcsock.c

@@ -111,7 +111,7 @@ static void svc_release_skb(struct svc_rqst *rqstp)
 		rqstp->rq_xprt_ctxt = NULL;
 
 		dprintk("svc: service %p, releasing skb %p\n", rqstp, skb);
-		skb_free_datagram(svsk->sk_sk, skb);
+		skb_free_datagram_locked(svsk->sk_sk, skb);
 	}
 }
 
@@ -578,7 +578,7 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp)
 				"svc: received unknown control message %d/%d; "
 				"dropping RPC reply datagram\n",
 					cmh->cmsg_level, cmh->cmsg_type);
-		skb_free_datagram(svsk->sk_sk, skb);
+		skb_free_datagram_locked(svsk->sk_sk, skb);
 		return 0;
 	}
 
@@ -588,18 +588,18 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp)
 		if (csum_partial_copy_to_xdr(&rqstp->rq_arg, skb)) {
 			local_bh_enable();
 			/* checksum error */
-			skb_free_datagram(svsk->sk_sk, skb);
+			skb_free_datagram_locked(svsk->sk_sk, skb);
 			return 0;
 		}
 		local_bh_enable();
-		skb_free_datagram(svsk->sk_sk, skb);
+		skb_free_datagram_locked(svsk->sk_sk, skb);
 	} else {
 		/* we can use it in-place */
 		rqstp->rq_arg.head[0].iov_base = skb->data +
 			sizeof(struct udphdr);
 		rqstp->rq_arg.head[0].iov_len = len;
 		if (skb_checksum_complete(skb)) {
-			skb_free_datagram(svsk->sk_sk, skb);
+			skb_free_datagram_locked(svsk->sk_sk, skb);
 			return 0;
 		}
 		rqstp->rq_xprt_ctxt = skb;

net/wireless/sme.c

@@ -165,7 +165,7 @@ void cfg80211_conn_work(struct work_struct *work)
 	struct cfg80211_registered_device *rdev =
 		container_of(work, struct cfg80211_registered_device, conn_work);
 	struct wireless_dev *wdev;
-	u8 bssid[ETH_ALEN];
+	u8 bssid_buf[ETH_ALEN], *bssid = NULL;
 
 	rtnl_lock();
 	cfg80211_lock_rdev(rdev);
@@ -181,7 +181,10 @@ void cfg80211_conn_work(struct work_struct *work)
 			wdev_unlock(wdev);
 			continue;
 		}
-		memcpy(bssid, wdev->conn->params.bssid, ETH_ALEN);
+		if (wdev->conn->params.bssid) {
+			memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN);
+			bssid = bssid_buf;
+		}
 		if (cfg80211_conn_do_work(wdev))
 			__cfg80211_connect_result(
 					wdev->netdev, bssid,