[media] v4l: xilinx: Add Test Pattern Generator driver

The TPG generates multiple static or dynamic test patterns. The driver
currently hardcodes the pattern to the moving box pattern.
Signed-off-by: NChristian Kohn <christian.kohn@xilinx.com>
Signed-off-by: NHyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt

+Xilinx Video Test Pattern Generator (TPG)
+-----------------------------------------
+
+Required properties:
+
+- compatible: Must contain at least one of
+
+    "xlnx,v-tpg-5.0" (TPG version 5.0)
+    "xlnx,v-tpg-6.0" (TPG version 6.0)
+
+  TPG versions backward-compatible with previous versions should list all
+  compatible versions in the newer to older order.
+
+- reg: Physical base address and length of the registers set for the device.
+
+- clocks: Reference to the video core clock.
+
+- xlnx,video-format, xlnx,video-width: Video format and width, as defined in
+  video.txt.
+
+- port: Video port, using the DT bindings defined in ../video-interfaces.txt.
+  The TPG has a single output port numbered 0.
+
+Optional properties:
+
+- xlnx,vtc: A phandle referencing the Video Timing Controller that generates
+  video timings for the TPG test patterns.
+
+- timing-gpios: Specifier for a GPIO that controls the timing mux at the TPG
+  input. The GPIO active level corresponds to the selection of VTC-generated
+  video timings.
+
+The xlnx,vtc and timing-gpios properties are mandatory when the TPG is
+synthesized with two ports and forbidden when synthesized with one port.
+
+Example:
+
+	tpg_0: tpg@40050000 {
+		compatible = "xlnx,v-tpg-6.0", "xlnx,v-tpg-5.0";
+		reg = <0x40050000 0x10000>;
+		clocks = <&clkc 15>;
+
+		xlnx,vtc = <&vtc_3>;
+		timing-gpios = <&ps7_gpio_0 55 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				xlnx,video-format = <XVIP_VF_YUV_422>;
+				xlnx,video-width = <8>;
+
+				tpg_in: endpoint {
+					remote-endpoint = <&adv7611_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+
+				xlnx,video-format = <XVIP_VF_YUV_422>;
+				xlnx,video-width = <8>;
+
+				tpg1_out: endpoint {
+					remote-endpoint = <&switch_in0>;
+				};
+			}:
+		};
+	};

MAINTAINERS

@@ -10826,6 +10826,7 @@ T:	git git://linuxtv.org/media_tree.git
 S:	Supported
 F:	Documentation/devicetree/bindings/media/xilinx/
 F:	drivers/media/platform/xilinx/
+F:	include/uapi/linux/xilinx-v4l2-controls.h
 
 XILLYBUS DRIVER
 M:	Eli Billauer <eli.billauer@gmail.com>

drivers/media/platform/xilinx/Kconfig

@@ -7,6 +7,13 @@ config VIDEO_XILINX
 
 if VIDEO_XILINX
 
+config VIDEO_XILINX_TPG
+	tristate "Xilinx Video Test Pattern Generator"
+	depends on VIDEO_XILINX
+	select VIDEO_XILINX_VTC
+	---help---
+	   Driver for the Xilinx Video Test Pattern Generator
+
 config VIDEO_XILINX_VTC
 	tristate "Xilinx Video Timing Controller"
 	depends on VIDEO_XILINX

drivers/media/platform/xilinx/Makefile

 xilinx-video-objs += xilinx-dma.o xilinx-vip.o xilinx-vipp.o
 
 obj-$(CONFIG_VIDEO_XILINX) += xilinx-video.o
+obj-$(CONFIG_VIDEO_XILINX_TPG) += xilinx-tpg.o
 obj-$(CONFIG_VIDEO_XILINX_VTC) += xilinx-vtc.o

include/uapi/linux/Kbuild

@@ -446,5 +446,6 @@ header-y += wireless.h
 header-y += x25.h
 header-y += xattr.h
 header-y += xfrm.h
+header-y += xilinx-v4l2-controls.h
 header-y += zorro.h
 header-y += zorro_ids.h

include/uapi/linux/xilinx-v4l2-controls.h

+/*
+ * Xilinx Controls Header
+ *
+ * Copyright (C) 2013-2015 Ideas on Board
+ * Copyright (C) 2013-2015 Xilinx, Inc.
+ *
+ * Contacts: Hyun Kwon <hyun.kwon@xilinx.com>
+ *           Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __UAPI_XILINX_V4L2_CONTROLS_H__
+#define __UAPI_XILINX_V4L2_CONTROLS_H__
+
+#include <linux/v4l2-controls.h>
+
+#define V4L2_CID_XILINX_OFFSET	0xc000
+#define V4L2_CID_XILINX_BASE	(V4L2_CID_USER_BASE + V4L2_CID_XILINX_OFFSET)
+
+/*
+ * Private Controls for Xilinx Video IPs
+ */
+
+/*
+ * Xilinx TPG Video IP
+ */
+
+#define V4L2_CID_XILINX_TPG			(V4L2_CID_USER_BASE + 0xc000)
+
+/* Draw cross hairs */
+#define V4L2_CID_XILINX_TPG_CROSS_HAIRS		(V4L2_CID_XILINX_TPG + 1)
+/* Enable a moving box */
+#define V4L2_CID_XILINX_TPG_MOVING_BOX		(V4L2_CID_XILINX_TPG + 2)
+/* Mask out a color component */
+#define V4L2_CID_XILINX_TPG_COLOR_MASK		(V4L2_CID_XILINX_TPG + 3)
+/* Enable a stuck pixel feature */
+#define V4L2_CID_XILINX_TPG_STUCK_PIXEL		(V4L2_CID_XILINX_TPG + 4)
+/* Enable a noisy output */
+#define V4L2_CID_XILINX_TPG_NOISE		(V4L2_CID_XILINX_TPG + 5)
+/* Enable the motion feature */
+#define V4L2_CID_XILINX_TPG_MOTION		(V4L2_CID_XILINX_TPG + 6)
+/* Configure the motion speed of moving patterns */
+#define V4L2_CID_XILINX_TPG_MOTION_SPEED	(V4L2_CID_XILINX_TPG + 7)
+/* The row of horizontal cross hair location */
+#define V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW	(V4L2_CID_XILINX_TPG + 8)
+/* The colum of vertical cross hair location */
+#define V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN	(V4L2_CID_XILINX_TPG + 9)
+/* Set starting point of sine wave for horizontal component */
+#define V4L2_CID_XILINX_TPG_ZPLATE_HOR_START	(V4L2_CID_XILINX_TPG + 10)
+/* Set speed of the horizontal component */
+#define V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED	(V4L2_CID_XILINX_TPG + 11)
+/* Set starting point of sine wave for vertical component */
+#define V4L2_CID_XILINX_TPG_ZPLATE_VER_START	(V4L2_CID_XILINX_TPG + 12)
+/* Set speed of the vertical component */
+#define V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED	(V4L2_CID_XILINX_TPG + 13)
+/* Moving box size */
+#define V4L2_CID_XILINX_TPG_BOX_SIZE		(V4L2_CID_XILINX_TPG + 14)
+/* Moving box color */
+#define V4L2_CID_XILINX_TPG_BOX_COLOR		(V4L2_CID_XILINX_TPG + 15)
+/* Upper limit count of generated stuck pixels */
+#define V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH	(V4L2_CID_XILINX_TPG + 16)
+/* Noise level */
+#define V4L2_CID_XILINX_TPG_NOISE_GAIN		(V4L2_CID_XILINX_TPG + 17)
+
+#endif /* __UAPI_XILINX_V4L2_CONTROLS_H__ */