Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 6
Star 0
Fork 0
K
Kernel
提交 a5350a96 编写于 作者: P Paul Mundt
浏览文件
操作

sh: Kill off dead HS771RVoIP board support. 

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 427c727f
隐藏空白更改
内联 并排
Showing with 0 addition and 1646 deletion
arch/sh/Kconfig
浏览文件 @ a5350a96
...@@ -440,13 +440,6 @@ config SH_SECUREEDGE5410 ...@@ -440,13 +440,6 @@ config SH_SECUREEDGE5410
This includes both the OEM SecureEdge products as well as the This includes both the OEM SecureEdge products as well as the
SME product line. SME product line.
config SH_HS7751RVOIP
bool "HS7751RVOIP"
depends on CPU_SUBTYPE_SH7751R
help
Select HS7751RVOIP if configuring for a Renesas Technology
Sales VoIP board.
config SH_7710VOIPGW config SH_7710VOIPGW
bool "SH7710-VOIP-GW" bool "SH7710-VOIP-GW"
depends on CPU_SUBTYPE_SH7710 depends on CPU_SUBTYPE_SH7710
......
arch/sh/Makefile
浏览文件 @ a5350a96
...@@ -112,7 +112,6 @@ machdir-$(CONFIG_SH_DREAMCAST) += dreamcast ...@@ -112,7 +112,6 @@ machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
machdir-$(CONFIG_SH_MPC1211) += mpc1211 machdir-$(CONFIG_SH_MPC1211) += mpc1211
machdir-$(CONFIG_SH_SH03) += sh03 machdir-$(CONFIG_SH_SH03) += sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip
machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh
machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
......
arch/sh/boards/renesas/hs7751rvoip/Kconfig 已删除 100644 → 0
浏览文件 @ 427c727f
if SH_HS7751RVOIP
menu "HS7751RVoIP options"
config HS7751RVOIP_CODEC
bool "Support VoIP Codec section"
help
Selecting this option will support CODEC section.
endmenu
endif
arch/sh/boards/renesas/hs7751rvoip/Makefile 已删除 100644 → 0
浏览文件 @ 427c727f
#
# Makefile for the HS7751RVoIP specific parts of the kernel
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_PCI) += pci.o
arch/sh/boards/renesas/hs7751rvoip/io.c 已删除 100644 → 0
浏览文件 @ 427c727f
/*
* linux/arch/sh/boards/renesas/hs7751rvoip/io.c
*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
* I/O routine for Renesas Technology sales HS7751RVoIP
*
* Initial version only to support LAN access; some
* placeholder code from io_hs7751rvoip.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/hs7751rvoip.h>
#include <asm/addrspace.h>
extern void *area6_io8_base; /* Area 6 8bit I/O Base address */
extern void *area5_io16_base; /* Area 5 16bit I/O Base address */
/*
* The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC)
* of the 7751R processor, and has a SuperIO accessible via the PCI.
* The board also includes a PCMCIA controller on its memory bus,
* like the other Solution Engine boards.
*/
#define CODEC_IO_BASE 0x1000
#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE))
static inline unsigned long port2adr(unsigned int port)
{
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
if (port == 0x3f6)
return ((unsigned long)area5_io16_base + 0x0c);
else
return ((unsigned long)area5_io16_base + 0x800 +
((port-0x1f0) << 1));
else
maybebadio((unsigned long)port);
return port;
}
/* The 7751R HS7751RVoIP seems to have everything hooked */
/* up pretty normally (nothing on high-bytes only...) so this */
/* shouldn't be needed */
static inline int shifted_port(unsigned long port)
{
/* For IDE registers, value is not shifted */
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
return 0;
else
return 1;
}
#if defined(CONFIG_HS7751RVOIP_CODEC)
#define codec_port(port) \
((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20)))
#else
#define codec_port(port) (0)
#endif
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
* is mapped through the PCI IO window. Stuff with high bits (PXSEG)
* should be way beyond the window, and is used w/o translation for
* compatibility.
*/
unsigned char hs7751rvoip_inb(unsigned long port)
{
if (PXSEG(port))
return ctrl_inb(port);
else if (codec_port(port))
return ctrl_inb(CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inb(pci_ioaddr(port));
else
return ctrl_inw(port2adr(port)) & 0xff;
}
unsigned char hs7751rvoip_inb_p(unsigned long port)
{
unsigned char v;
if (PXSEG(port))
v = ctrl_inb(port);
else if (codec_port(port))
v = ctrl_inb(CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
ctrl_delay();
return v;
}
unsigned short hs7751rvoip_inw(unsigned long port)
{
if (PXSEG(port))
return ctrl_inw(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inw(pci_ioaddr(port));
else
maybebadio(port);
return 0;
}
unsigned int hs7751rvoip_inl(unsigned long port)
{
if (PXSEG(port))
return ctrl_inl(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inl(pci_ioaddr(port));
else
maybebadio(port);
return 0;
}
void hs7751rvoip_outb(unsigned char value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (codec_port(port))
ctrl_outb(value, CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outb(value, port2adr(port));
}
void hs7751rvoip_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (codec_port(port))
ctrl_outb(value, CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
ctrl_delay();
}
void hs7751rvoip_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
ctrl_outw(value, port);
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outw(value, pci_ioaddr(port));
else
maybebadio(port);
}
void hs7751rvoip_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
ctrl_outl(value, port);
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count)
{
u8 *buf = addr;
if (PXSEG(port))
while (count--)
*buf++ = ctrl_inb(port);
else if (codec_port(port))
while (count--)
*buf++ = ctrl_inb(CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*buf++ = *bp;
} else {
volatile u16 *p = (volatile u16 *)port2adr(port);
while (count--)
*buf++ = *p & 0xff;
}
}
void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
{
volatile u16 *p;
u16 *buf = addr;
if (PXSEG(port))
p = (volatile u16 *)port;
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
while (count--)
*buf++ = *p;
}
void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count)
{
if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
u32 *buf = addr;
while (count--)
*buf++ = *p;
} else
maybebadio(port);
}
void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count)
{
const u8 *buf = addr;
if (PXSEG(port))
while (count--)
ctrl_outb(*buf++, port);
else if (codec_port(port))
while (count--)
ctrl_outb(*buf++, CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*bp = *buf++;
} else {
volatile u16 *p = (volatile u16 *)port2adr(port);
while (count--)
*p = *buf++;
}
}
void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count)
{
volatile u16 *p;
const u16 *buf = addr;
if (PXSEG(port))
p = (volatile u16 *)port;
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
while (count--)
*p = *buf++;
}
void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count)
{
const u32 *buf = addr;
if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
while (count--)
*p = *buf++;
} else
maybebadio(port);
}
void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size)
{
if (PXSEG(port))
return (void __iomem *)port;
else if (unlikely(codec_port(port) && (size == 1)))
return (void __iomem *)CODEC_IOMAP(port);
else if (is_pci_ioaddr(port))
return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
arch/sh/boards/renesas/hs7751rvoip/irq.c 已删除 100644 → 0
浏览文件 @ 427c727f
/*
* linux/arch/sh/boards/renesas/hs7751rvoip/irq.c
*
* Copyright (C) 2000 Kazumoto Kojima
*
* Renesas Technology Sales HS7751RVoIP Support.
*
* Modified for HS7751RVoIP by
* Atom Create Engineering Co., Ltd. 2002.
* Lineo uSolutions, Inc. 2003.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hs7751rvoip.h>
static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7};
static void enable_hs7751rvoip_irq(unsigned int irq);
static void disable_hs7751rvoip_irq(unsigned int irq);
/* shutdown is same as "disable" */
#define shutdown_hs7751rvoip_irq disable_hs7751rvoip_irq
static void ack_hs7751rvoip_irq(unsigned int irq);
static void end_hs7751rvoip_irq(unsigned int irq);
static unsigned int startup_hs7751rvoip_irq(unsigned int irq)
{
enable_hs7751rvoip_irq(irq);
return 0; /* never anything pending */
}
static void disable_hs7751rvoip_irq(unsigned int irq)
{
unsigned short val;
unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
/* Set the priority in IPR to 0 */
val = ctrl_inw(IRLCNTR3);
val &= mask;
ctrl_outw(val, IRLCNTR3);
}
static void enable_hs7751rvoip_irq(unsigned int irq)
{
unsigned short val;
unsigned short value = (0x0001 << mask_pos[irq]);
/* Set priority in IPR back to original value */
val = ctrl_inw(IRLCNTR3);
val |= value;
ctrl_outw(val, IRLCNTR3);
}
static void ack_hs7751rvoip_irq(unsigned int irq)
{
disable_hs7751rvoip_irq(irq);
}
static void end_hs7751rvoip_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_hs7751rvoip_irq(irq);
}
static struct hw_interrupt_type hs7751rvoip_irq_type = {
.typename = "HS7751RVoIP IRQ",
.startup = startup_hs7751rvoip_irq,
.shutdown = shutdown_hs7751rvoip_irq,
.enable = enable_hs7751rvoip_irq,
.disable = disable_hs7751rvoip_irq,
.ack = ack_hs7751rvoip_irq,
.end = end_hs7751rvoip_irq,
};
static void make_hs7751rvoip_irq(unsigned int irq)
{
disable_irq_nosync(irq);
irq_desc[irq].chip = &hs7751rvoip_irq_type;
disable_hs7751rvoip_irq(irq);
}
/*
* Initialize IRQ setting
*/
void __init init_hs7751rvoip_IRQ(void)
{
int i;
/* IRL0=ON HOOK1
* IRL1=OFF HOOK1
* IRL2=ON HOOK2
* IRL3=OFF HOOK2
* IRL4=Ringing Detection
* IRL5=CODEC
* IRL6=Ethernet
* IRL7=Ethernet Hub
* IRL8=USB Communication
* IRL9=USB Connection
* IRL10=USB DMA
* IRL11=CF Card
* IRL12=PCMCIA
* IRL13=PCI Slot
*/
ctrl_outw(0x9876, IRLCNTR1);
ctrl_outw(0xdcba, IRLCNTR2);
ctrl_outw(0x0050, IRLCNTR4);
ctrl_outw(0x4321, IRLCNTR5);
for (i=0; i<14; i++)
make_hs7751rvoip_irq(i);
}
arch/sh/boards/renesas/hs7751rvoip/pci.c 已删除 100644 → 0
浏览文件 @ 427c727f
/*
* linux/arch/sh/boards/renesas/hs7751rvoip/pci.c
*
* Author: Ian DaSilva (idasilva@mvista.com)
*
* Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* PCI initialization for the Renesas SH7751R HS7751RVoIP board
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <asm/io.h>
#include "../../../drivers/pci/pci-sh7751.h"
#include <asm/hs7751rvoip/hs7751rvoip.h>
#define PCIMCR_MRSET_OFF 0xBFFFFFFF
#define PCIMCR_RFSH_OFF 0xFFFFFFFB
/*
* Only long word accesses of the PCIC's internal local registers and the
* configuration registers from the CPU is supported.
*/
#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
#define PCIC_READ(x) readl(PCI_REG(x))
/*
* Description: This function sets up and initializes the pcic, sets
* up the BARS, maps the DRAM into the address space etc, etc.
*/
int __init pcibios_init_platform(void)
{
unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
unsigned short bcr2, bcr3;
/*
* Initialize the slave bus controller on the pcic. The values used
* here should not be hardcoded, but they should be taken from the bsc
* on the processor, to make this function as generic as possible.
* (i.e. Another sbc may usr different SDRAM timing settings -- in order
* for the pcic to work, its settings need to be exactly the same.)
*/
bcr1 = (*(volatile unsigned long *)(SH7751_BCR1));
bcr2 = (*(volatile unsigned short *)(SH7751_BCR2));
bcr3 = (*(volatile unsigned short *)(SH7751_BCR3));
wcr1 = (*(volatile unsigned long *)(SH7751_WCR1));
wcr2 = (*(volatile unsigned long *)(SH7751_WCR2));
wcr3 = (*(volatile unsigned long *)(SH7751_WCR3));
mcr = (*(volatile unsigned long *)(SH7751_MCR));
bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
(*(volatile unsigned long *)(SH7751_BCR1)) = bcr1;
bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
PCIC_WRITE(SH7751_PCIBCR3, bcr3); /* PCIC BCR3 */
PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
/* Enable all interrupts, so we know what to fix */
PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
/* Set up standard PCI config registers */
PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */
PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
/* Now turn it on... */
PCIC_WRITE(SH7751_PCICR, 0xa5000001);
/*
* Set PCIMBR and PCIIOBR here, assuming a single window
* (16M MEM, 256K IO) is enough. If a larger space is
* needed, the readx/writex and inx/outx functions will
* have to do more (e.g. setting registers for each call).
*/
/*
* Set the MBR so PCI address is one-to-one with window,
* meaning all calls go straight through... use ifdef to
* catch erroneous assumption.
*/
BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
/* Set IOBR for window containing area specified in pci.h */
PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
/* All done, may as well say so... */
printk("SH7751R PCI: Finished initialization of the PCI controller\n");
return 1;
}
int __init pcibios_map_platform_irq(u8 slot, u8 pin)
{
switch (slot) {
case 0: return IRQ_PCISLOT; /* PCI Extend slot */
case 1: return IRQ_PCMCIA; /* PCI Cardbus Bridge */
case 2: return IRQ_PCIETH; /* Realtek Ethernet controller */
case 3: return IRQ_PCIHUB; /* Realtek Ethernet Hub controller */
default:
printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
return -1;
}
}
static struct resource sh7751_io_resource = {
.name = "SH7751_IO",
.start = 0x4000,
.end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource sh7751_mem_resource = {
.name = "SH7751_mem",
.start = SH7751_PCI_MEMORY_BASE,
.end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM
};
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ NULL, NULL, NULL, 0, 0 },
};
EXPORT_SYMBOL(board_pci_channels);
arch/sh/boards/renesas/hs7751rvoip/setup.c 已删除 100644 → 0
浏览文件 @ 427c727f
/*
* Renesas Technology Sales HS7751RVoIP Support.
*
* Copyright (C) 2000 Kazumoto Kojima
*
* Modified for HS7751RVoIP by
* Atom Create Engineering Co., Ltd. 2002.
* Lineo uSolutions, Inc. 2003.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <asm/hs7751rvoip.h>
#include <asm/io.h>
#include <asm/machvec.h>
static void hs7751rvoip_power_off(void)
{
ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
}
void *area5_io8_base;
void *area6_io8_base;
void *area5_io16_base;
void *area6_io16_base;
static int __init hs7751rvoip_cf_init(void)
{
pgprot_t prot;
unsigned long paddrbase;
/* open I/O area window */
paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800));
prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16);
area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area5_io16_base) {
printk("allocate_cf_area : can't open CF I/O window!\n");
return -ENOMEM;
}
/* XXX : do we need attribute and common-memory area also? */
paddrbase = virt_to_phys((void *)PA_AREA6_IO);
#if defined(CONFIG_HS7751RVOIP_CODEC)
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8);
#else
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8);
#endif
area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area6_io8_base) {
printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n");
return -ENOMEM;
}
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area6_io16_base) {
printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n");
return -ENOMEM;
}
return 0;
}
device_initcall(hs7751rvoip_cf_init);
/*
* Initialize the board
*/
static void __init hs7751rvoip_setup(char **cmdline_p)
{
ctrl_outb(0xf0, PA_OUTPORTR);
pm_power_off = hs7751rvoip_power_off;
printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
}
static struct sh_machine_vector mv_hs7751rvoip __initmv = {
.mv_name = "HS7751RVoIP",
.mv_setup = hs7751rvoip_setup,
.mv_nr_irqs = 72,
.mv_inb = hs7751rvoip_inb,
.mv_inw = hs7751rvoip_inw,
.mv_inl = hs7751rvoip_inl,
.mv_outb = hs7751rvoip_outb,
.mv_outw = hs7751rvoip_outw,
.mv_outl = hs7751rvoip_outl,
.mv_inb_p = hs7751rvoip_inb_p,
.mv_inw_p = hs7751rvoip_inw,
.mv_inl_p = hs7751rvoip_inl,
.mv_outb_p = hs7751rvoip_outb_p,
.mv_outw_p = hs7751rvoip_outw,
.mv_outl_p = hs7751rvoip_outl,
.mv_insb = hs7751rvoip_insb,
.mv_insw = hs7751rvoip_insw,
.mv_insl = hs7751rvoip_insl,
.mv_outsb = hs7751rvoip_outsb,
.mv_outsw = hs7751rvoip_outsw,
.mv_outsl = hs7751rvoip_outsl,
.mv_init_irq = init_hs7751rvoip_IRQ,
.mv_ioport_map = hs7751rvoip_ioport_map,
};
arch/sh/configs/hs7751rvoip_defconfig 已删除 100644 → 0
浏览文件 @ 427c727f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Tue Oct 3 13:04:52 2006
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System type
#
# CONFIG_SH_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SOLUTION_ENGINE is not set
# CONFIG_SH_7300_SOLUTION_ENGINE is not set
# CONFIG_SH_7343_SOLUTION_ENGINE is not set
# CONFIG_SH_73180_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_HP6XX is not set
# CONFIG_SH_EC3104 is not set
# CONFIG_SH_SATURN is not set
# CONFIG_SH_DREAMCAST is not set
# CONFIG_SH_BIGSUR is not set
# CONFIG_SH_MPC1211 is not set
# CONFIG_SH_SH03 is not set
# CONFIG_SH_SECUREEDGE5410 is not set
CONFIG_SH_HS7751RVOIP=y
# CONFIG_SH_7710VOIPGW is not set
# CONFIG_SH_RTS7751R2D is not set
# CONFIG_SH_R7780RP is not set
# CONFIG_SH_EDOSK7705 is not set
# CONFIG_SH_SH4202_MICRODEV is not set
# CONFIG_SH_LANDISK is not set
# CONFIG_SH_TITAN is not set
# CONFIG_SH_SHMIN is not set
# CONFIG_SH_UNKNOWN is not set
#
# Processor selection
#
CONFIG_CPU_SH4=y
#
# SH-2 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7604 is not set
#
# SH-3 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
#
# SH-4 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
#
# ST40 Processor Support
#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
#
# SH-4A Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
#
# SH4AL-DSP Processor Support
#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
#
# Memory management options
#
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_VSYSCALL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SH_FPU=y
# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_SR_RB=y
#
# Timer support
#
CONFIG_SH_TMU=y
#
# HS7751RVoIP options
#
CONFIG_HS7751RVOIP_CODEC=y
CONFIG_SH_PCLK_FREQ=60000000
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# DMA support
#
# CONFIG_SH_DMA is not set
#
# Companion Chips
#
# CONFIG_HD6446X_SERIES is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=64M console=ttySC1,115200 root=/dev/hda1"
#
# Bus options
#
# CONFIG_PCI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options (EXPERIMENTAL)
#
# CONFIG_PM is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=1
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
arch/sh/drivers/pci/pci-auto.c
浏览文件 @ a5350a96
...@@ -516,10 +516,8 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) ...@@ -516,10 +516,8 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
PCI_COMMAND, cmdstat | PCI_COMMAND_IO | PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
PCI_COMMAND_MEMORY | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER); PCI_COMMAND_MASTER);
#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
early_write_config_byte(hose, top_bus, current_bus, pci_devfn, early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_LATENCY_TIMER, 0x80); PCI_LATENCY_TIMER, 0x80);
#endif
/* Allocate PCI I/O and/or memory space */ /* Allocate PCI I/O and/or memory space */
pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
......
arch/sh/tools/mach-types
浏览文件 @ a5350a96
...@@ -29,7 +29,6 @@ HP6XX SH_HP6XX ...@@ -29,7 +29,6 @@ HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211 MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410 SNAPGEAR SH_SECUREEDGE5410
HS7751RVOIP SH_HS7751RVOIP
EDOSK7705 SH_EDOSK7705 EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03 SH03 SH_SH03
......
include/asm-sh/hs7751rvoip.h 已删除 100644 → 0
浏览文件 @ 427c727f
#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H
#define __ASM_SH_RENESAS_HS7751RVOIP_H
/*
* linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h
*
* Copyright (C) 2000 Atom Create Engineering Co., Ltd.
*
* Renesas Technology Sales HS7751RVoIP support
*/
/* Box specific addresses. */
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_SLICCNTR1 0xa4000006 /* SLIC PIO Control 1 */
#define PA_SLICCNTR2 0xa4000008 /* SLIC PIO Control 2 */
#define PA_DMACNTR 0xa400000a /* USB DMA Control */
#define PA_INPORTR 0xa400000c /* Input Port Register */
#define PA_OUTPORTR 0xa400000e /* Output Port Reguster */
#define PA_VERREG 0xa4000014 /* FPGA Version Register */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IRLCNTR2 (PA_BCR + 2) /* Interrupt Control Register2 */
#define IRLCNTR3 (PA_BCR + 4) /* Interrupt Control Register3 */
#define IRLCNTR4 (PA_BCR + 16) /* Interrupt Control Register4 */
#define IRLCNTR5 (PA_BCR + 18) /* Interrupt Control Register5 */
#define IRQ_PCIETH 6 /* PCI Ethernet IRQ */
#define IRQ_PCIHUB 7 /* PCI Ethernet Hub IRQ */
#define IRQ_USBCOM 8 /* USB Comunication IRQ */
#define IRQ_USBCON 9 /* USB Connect IRQ */
#define IRQ_USBDMA 10 /* USB DMA IRQ */
#define IRQ_CFCARD 11 /* CF Card IRQ */
#define IRQ_PCMCIA 12 /* PCMCIA IRQ */
#define IRQ_PCISLOT 13 /* PCI Slot #1 IRQ */
#define IRQ_ONHOOK1 0 /* ON HOOK1 IRQ */
#define IRQ_OFFHOOK1 1 /* OFF HOOK1 IRQ */
#define IRQ_ONHOOK2 2 /* ON HOOK2 IRQ */
#define IRQ_OFFHOOK2 3 /* OFF HOOK2 IRQ */
#define IRQ_RINGING 4 /* Ringing IRQ */
#define IRQ_CODEC 5 /* CODEC IRQ */
#define __IO_PREFIX hs7751rvoip
#include <asm/io_generic.h>
/* arch/sh/boards/renesas/hs7751rvoip/irq.c */
void init_hs7751rvoip_IRQ(void);
/* arch/sh/boards/renesas/hs7751rvoip/io.c */
void *hs7751rvoip_ioremap(unsigned long, unsigned long);
#endif /* __ASM_SH_RENESAS_HS7751RVOIP */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或