Merge branch 'renesas-kzm9g' into renesas-board-new

* renesas-kzm9g:
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3
  ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support
  ARM: mach-shmobile: kzm9g: add LCDC support
  ARM: mach-shmobile: kzm9g: add external USB Host support
  ARM: mach-shmobile: kzm9g: add SMSC 9221 support
  ARM: mach-shmobile: kzm9g: add defconfig
  ARM: mach-shmobile: add KZM-A9-GT board support

Conflicts:
	arch/arm/mach-shmobile/Makefile

arch/arm/configs/kzm9g_defconfig

+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
+CONFIG_ARCH_SH73A0=y
+CONFIG_MACH_KZM9G=y
+CONFIG_MEMORY_START=0x41000000
+CONFIG_MEMORY_SIZE=0x1f000000
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"
+CONFIG_KEXEC=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=y
+CONFIG_SH_IRDA=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_SPARSEKMAP=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ST1232=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=9
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_PCF857X=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_FB_SH_MOBILE_MERAM=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+CONFIG_ASYNC_TX_DMA=y
+CONFIG_STAGING=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRC16=y

arch/arm/mach-shmobile/Kconfig

@@ -103,6 +103,11 @@ config MACH_MARZEN
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 
+config MACH_KZM9G
+	bool "KZM-A9-GT board"
+	depends on ARCH_SH73A0
+	select ARCH_REQUIRE_GPIOLIB
+
 comment "SH-Mobile System Configuration"
 
 config CPU_HAS_INTEVT

arch/arm/mach-shmobile/Makefile

@@ -50,6 +50,7 @@ obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
+obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)

arch/arm/mach-shmobile/board-kzm9g.c

+/*
+ * KZM-A9-GT board support
+ *
+ * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/input.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
+#include <mach/irqs.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ * external GPIO
+ */
+#define GPIO_PCF8575_BASE	(GPIO_NR)
+#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
+#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
+#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
+#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
+#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
+#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
+#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
+
+/* SMSC 9221 */
+static struct resource smsc9221_resources[] = {
+	[0] = {
+		.start	= 0x10000000, /* CS4 */
+		.end	= 0x100000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x260), /* IRQ3 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc9221_platdata = {
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smsc_device = {
+	.name		= "smsc911x",
+	.dev  = {
+		.platform_data = &smsc9221_platdata,
+	},
+	.resource	= smsc9221_resources,
+	.num_resources	= ARRAY_SIZE(smsc9221_resources),
+};
+
+/* USB external chip */
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip	= 0,
+	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
+};
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start	= 0x10010000,
+		.end	= 0x1001ffff - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x220), /* IRQ1 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name	= "r8a66597_hcd",
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_resources),
+	.resource	= usb_resources,
+};
+
+/* LCDC */
+static struct fb_videomode kzm_lcdc_mode = {
+	.name		= "WVGA Panel",
+	.xres		= 800,
+	.yres		= 480,
+	.left_margin	= 220,
+	.right_margin	= 110,
+	.hsync_len	= 70,
+	.upper_margin	= 20,
+	.lower_margin	= 5,
+	.vsync_len	= 5,
+	.sync		= 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan		= LCDC_CHAN_MAINLCD,
+		.fourcc		= V4L2_PIX_FMT_RGB565,
+		.interface_type	= RGB24,
+		.lcd_modes	= &kzm_lcdc_mode,
+		.num_modes	= 1,
+		.clock_divider	= 5,
+		.flags		= 0,
+		.panel_cfg = {
+			.width	= 152,
+			.height	= 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev	= {
+		.platform_data	= &lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xe6bd0000,
+		.end	= 0xe6bd00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(141),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= gic_spi(140),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_platdata = {
+	.ocr		= MMC_VDD_165_195,
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmc_device = {
+	.name		= "sh_mmcif",
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
+	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0xee100000,
+		.end	= 0xee1000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+		.start	= gic_spi(83),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= gic_spi(84),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= gic_spi(85),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+/* KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
+	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
+	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
+	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
+	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
+	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
+	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+	.poll_interval	= 250, /* poling at this point */
+};
+
+static struct platform_device gpio_keys_device = {
+	/* gpio-pcf857x.c driver doesn't support gpio_to_irq() */
+	.name	= "gpio-keys-polled",
+	.dev	= {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* I2C */
+static struct pcf857x_platform_data pcf8575_pdata = {
+	.gpio_base	= GPIO_PCF8575_BASE,
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("st1232-ts", 0x55),
+		.irq = intcs_evt2irq(0x300), /* IRQ8 */
+	},
+};
+
+static struct i2c_board_info i2c3_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8575", 0x20),
+		.platform_data = &pcf8575_pdata,
+	},
+};
+
+static struct platform_device *kzm_devices[] __initdata = {
+	&smsc_device,
+	&usb_host_device,
+	&lcdc_device,
+	&mmc_device,
+	&sdhi0_device,
+	&gpio_keys_device,
+};
+
+/*
+ * FIXME
+ *
+ * This is quick hack for enabling LCDC backlight
+ */
+static int __init as3711_enable_lcdc_backlight(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int i, ret;
+	__u8 magic[] = {
+		0x40, 0x2a,
+		0x43, 0x3c,
+		0x44, 0x3c,
+		0x45, 0x3c,
+		0x54, 0x03,
+		0x51, 0x00,
+		0x51, 0x01,
+		0xff, 0x00, /* wait */
+		0x43, 0xf0,
+		0x44, 0xf0,
+		0x45, 0xf0,
+	};
+
+	if (!machine_is_kzm9g())
+		return 0;
+
+	if (!a)
+		return 0;
+
+	msg.addr	= 0x40;
+	msg.len		= 2;
+	msg.flags	= 0;
+
+	for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
+		msg.buf = magic + i;
+
+		if (0xff == msg.buf[0]) {
+			udelay(500);
+			continue;
+		}
+
+		ret = i2c_transfer(a, &msg, 1);
+		if (ret < 0) {
+			pr_err("i2c transfer fail\n");
+			break;
+		}
+	}
+
+	return 0;
+}
+device_initcall(as3711_enable_lcdc_backlight);
+
+static void __init kzm_init(void)
+{
+	sh73a0_pinmux_init();
+
+	/* enable SCIFA4 */
+	gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
+	gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+
+	/* CS4 for SMSC/USB */
+	gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
+
+	/* SMSC */
+	gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
+	gpio_direction_input(GPIO_PORT224);
+
+	/* LCDC */
+	gpio_request(GPIO_FN_LCDD23,	NULL);
+	gpio_request(GPIO_FN_LCDD22,	NULL);
+	gpio_request(GPIO_FN_LCDD21,	NULL);
+	gpio_request(GPIO_FN_LCDD20,	NULL);
+	gpio_request(GPIO_FN_LCDD19,	NULL);
+	gpio_request(GPIO_FN_LCDD18,	NULL);
+	gpio_request(GPIO_FN_LCDD17,	NULL);
+	gpio_request(GPIO_FN_LCDD16,	NULL);
+	gpio_request(GPIO_FN_LCDD15,	NULL);
+	gpio_request(GPIO_FN_LCDD14,	NULL);
+	gpio_request(GPIO_FN_LCDD13,	NULL);
+	gpio_request(GPIO_FN_LCDD12,	NULL);
+	gpio_request(GPIO_FN_LCDD11,	NULL);
+	gpio_request(GPIO_FN_LCDD10,	NULL);
+	gpio_request(GPIO_FN_LCDD9,	NULL);
+	gpio_request(GPIO_FN_LCDD8,	NULL);
+	gpio_request(GPIO_FN_LCDD7,	NULL);
+	gpio_request(GPIO_FN_LCDD6,	NULL);
+	gpio_request(GPIO_FN_LCDD5,	NULL);
+	gpio_request(GPIO_FN_LCDD4,	NULL);
+	gpio_request(GPIO_FN_LCDD3,	NULL);
+	gpio_request(GPIO_FN_LCDD2,	NULL);
+	gpio_request(GPIO_FN_LCDD1,	NULL);
+	gpio_request(GPIO_FN_LCDD0,	NULL);
+	gpio_request(GPIO_FN_LCDDISP,	NULL);
+	gpio_request(GPIO_FN_LCDDCK,	NULL);
+
+	gpio_request(GPIO_PORT222,	NULL); /* LCDCDON */
+	gpio_request(GPIO_PORT226,	NULL); /* SC */
+	gpio_direction_output(GPIO_PORT222, 1);
+	gpio_direction_output(GPIO_PORT226, 1);
+
+	/* Touchscreen */
+	gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
+	gpio_direction_input(GPIO_PORT223);
+
+	/* enable MMCIF */
+	gpio_request(GPIO_FN_MMCCLK0,		NULL);
+	gpio_request(GPIO_FN_MMCCMD0_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_0_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_1_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_2_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_3_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_4_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_5_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_6_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_7_PU,	NULL);
+
+	/* enable SD */
+	gpio_request(GPIO_FN_SDHIWP0,		NULL);
+	gpio_request(GPIO_FN_SDHICD0,		NULL);
+	gpio_request(GPIO_FN_SDHICMD0,		NULL);
+	gpio_request(GPIO_FN_SDHICLK0,		NULL);
+	gpio_request(GPIO_FN_SDHID0_3,		NULL);
+	gpio_request(GPIO_FN_SDHID0_2,		NULL);
+	gpio_request(GPIO_FN_SDHID0_1,		NULL);
+	gpio_request(GPIO_FN_SDHID0_0,		NULL);
+	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
+	gpio_request(GPIO_PORT15, NULL);
+	gpio_direction_output(GPIO_PORT15, 1); /* power */
+
+	/* I2C 3 */
+	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
+	gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+
+	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
+	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
+
+	sh73a0_add_standard_devices();
+	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
+}
+
+MACHINE_START(KZM9G, "kzm9g")
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= kzm_init,
+	.timer		= &shmobile_timer,
+MACHINE_END

arch/arm/mach-shmobile/include/mach/sh73a0.h

@@ -482,6 +482,9 @@ enum {
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,
 	GPIO_FN_FSIAISLD_PU,
+
+	/* end of GPIO */
+	GPIO_NR,
 };
 
 /* DMA slave IDs */

arch/arm/mach-shmobile/pfc-sh73a0.c

@@ -829,14 +829,14 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
+		MSEL2CR_MSEL18_1), \
 	PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
 	PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
 	PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
 	PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
+		MSEL2CR_MSEL18_1), \
 	PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
 	PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
 	PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),

arch/arm/mach-shmobile/platsmp.c

@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <mach/common.h>
 
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || machine_is_kzm9g())
 #define is_r8a7779() machine_is_marzen()
 
 static unsigned int __init shmobile_smp_get_core_count(void)