dm: add verity target

This device-mapper target creates a read-only device that transparently
validates the data on one underlying device against a pre-generated tree
of cryptographic checksums stored on a second device.

Two checksum device formats are supported: version 0 which is already
shipping in Chromium OS and version 1 which incorporates some
improvements.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Signed-off-by: NWill Drewry <wad@chromium.org>
Signed-off-by: NElly Jones <ellyjones@chromium.org>
Cc: Milan Broz <mbroz@redhat.com>
Cc: Olof Johansson <olofj@chromium.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Documentation/device-mapper/verity.txt

+dm-verity
+==========
+
+Device-Mapper's "verity" target provides transparent integrity checking of
+block devices using a cryptographic digest provided by the kernel crypto API.
+This target is read-only.
+
+Construction Parameters
+=======================
+    <version> <dev> <hash_dev> <hash_start>
+    <data_block_size> <hash_block_size>
+    <num_data_blocks> <hash_start_block>
+    <algorithm> <digest> <salt>
+
+<version>
+    This is the version number of the on-disk format.
+
+    0 is the original format used in the Chromium OS.
+	The salt is appended when hashing, digests are stored continuously and
+	the rest of the block is padded with zeros.
+
+    1 is the current format that should be used for new devices.
+	The salt is prepended when hashing and each digest is
+	padded with zeros to the power of two.
+
+<dev>
+    This is the device containing the data the integrity of which needs to be
+    checked.  It may be specified as a path, like /dev/sdaX, or a device number,
+    <major>:<minor>.
+
+<hash_dev>
+    This is the device that that supplies the hash tree data.  It may be
+    specified similarly to the device path and may be the same device.  If the
+    same device is used, the hash_start should be outside of the dm-verity
+    configured device size.
+
+<data_block_size>
+    The block size on a data device.  Each block corresponds to one digest on
+    the hash device.
+
+<hash_block_size>
+    The size of a hash block.
+
+<num_data_blocks>
+    The number of data blocks on the data device.  Additional blocks are
+    inaccessible.  You can place hashes to the same partition as data, in this
+    case hashes are placed after <num_data_blocks>.
+
+<hash_start_block>
+    This is the offset, in <hash_block_size>-blocks, from the start of hash_dev
+    to the root block of the hash tree.
+
+<algorithm>
+    The cryptographic hash algorithm used for this device.  This should
+    be the name of the algorithm, like "sha1".
+
+<digest>
+    The hexadecimal encoding of the cryptographic hash of the root hash block
+    and the salt.  This hash should be trusted as there is no other authenticity
+    beyond this point.
+
+<salt>
+    The hexadecimal encoding of the salt value.
+
+Theory of operation
+===================
+
+dm-verity is meant to be setup as part of a verified boot path.  This
+may be anything ranging from a boot using tboot or trustedgrub to just
+booting from a known-good device (like a USB drive or CD).
+
+When a dm-verity device is configured, it is expected that the caller
+has been authenticated in some way (cryptographic signatures, etc).
+After instantiation, all hashes will be verified on-demand during
+disk access.  If they cannot be verified up to the root node of the
+tree, the root hash, then the I/O will fail.  This should identify
+tampering with any data on the device and the hash data.
+
+Cryptographic hashes are used to assert the integrity of the device on a
+per-block basis.  This allows for a lightweight hash computation on first read
+into the page cache.  Block hashes are stored linearly-aligned to the nearest
+block the size of a page.
+
+Hash Tree
+---------
+
+Each node in the tree is a cryptographic hash.  If it is a leaf node, the hash
+is of some block data on disk.  If it is an intermediary node, then the hash is
+of a number of child nodes.
+
+Each entry in the tree is a collection of neighboring nodes that fit in one
+block.  The number is determined based on block_size and the size of the
+selected cryptographic digest algorithm.  The hashes are linearly-ordered in
+this entry and any unaligned trailing space is ignored but included when
+calculating the parent node.
+
+The tree looks something like:
+
+alg = sha256, num_blocks = 32768, block_size = 4096
+
+                                 [   root    ]
+                                /    . . .    \
+                     [entry_0]                 [entry_1]
+                    /  . . .  \                 . . .   \
+         [entry_0_0]   . . .  [entry_0_127]    . . . .  [entry_1_127]
+           / ... \             /   . . .  \             /           \
+     blk_0 ... blk_127  blk_16256   blk_16383      blk_32640 . . . blk_32767
+
+
+On-disk format
+==============
+
+Below is the recommended on-disk format. The verity kernel code does not
+read the on-disk header. It only reads the hash blocks which directly
+follow the header. It is expected that a user-space tool will verify the
+integrity of the verity_header and then call dmsetup with the correct
+parameters. Alternatively, the header can be omitted and the dmsetup
+parameters can be passed via the kernel command-line in a rooted chain
+of trust where the command-line is verified.
+
+The on-disk format is especially useful in cases where the hash blocks
+are on a separate partition. The magic number allows easy identification
+of the partition contents. Alternatively, the hash blocks can be stored
+in the same partition as the data to be verified. In such a configuration
+the filesystem on the partition would be sized a little smaller than
+the full-partition, leaving room for the hash blocks.
+
+struct superblock {
+	uint8_t signature[8]
+		"verity\0\0";
+
+	uint8_t version;
+		1 - current format
+
+	uint8_t data_block_bits;
+		log2(data block size)
+
+	uint8_t hash_block_bits;
+		log2(hash block size)
+
+	uint8_t pad1[1];
+		zero padding
+
+	uint16_t salt_size;
+		big-endian salt size
+
+	uint8_t pad2[2];
+		zero padding
+
+	uint32_t data_blocks_hi;
+		big-endian high 32 bits of the 64-bit number of data blocks
+
+	uint32_t data_blocks_lo;
+		big-endian low 32 bits of the 64-bit number of data blocks
+
+	uint8_t algorithm[16];
+		cryptographic algorithm
+
+	uint8_t salt[384];
+		salt (the salt size is specified above)
+
+	uint8_t pad3[88];
+		zero padding to 512-byte boundary
+}
+
+Directly following the header (and with sector number padded to the next hash
+block boundary) are the hash blocks which are stored a depth at a time
+(starting from the root), sorted in order of increasing index.
+
+Status
+======
+V (for Valid) is returned if every check performed so far was valid.
+If any check failed, C (for Corruption) is returned.
+
+Example
+=======
+
+Setup a device:
+  dmsetup create vroot --table \
+    "0 2097152 "\
+    "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
+    "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
+    "1234000000000000000000000000000000000000000000000000000000000000"
+
+A command line tool veritysetup is available to compute or verify
+the hash tree or activate the kernel driver.  This is available from
+the LVM2 upstream repository and may be supplied as a package called
+device-mapper-verity-tools:
+    git://sources.redhat.com/git/lvm2
+    http://sourceware.org/git/?p=lvm2.git
+    http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
+
+veritysetup -a vroot /dev/sda1 /dev/sda2 \
+	4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076

drivers/md/Kconfig

@@ -370,4 +370,24 @@ config DM_FLAKEY
        ---help---
          A target that intermittently fails I/O for debugging purposes.
 
+config DM_VERITY
+	tristate "Verity target support (EXPERIMENTAL)"
+	depends on BLK_DEV_DM && EXPERIMENTAL
+	select CRYPTO
+	select CRYPTO_HASH
+	select DM_BUFIO
+	---help---
+	  This device-mapper target creates a read-only device that
+	  transparently validates the data on one underlying device against
+	  a pre-generated tree of cryptographic checksums stored on a second
+	  device.
+
+	  You'll need to activate the digests you're going to use in the
+	  cryptoapi configuration.
+
+	  To compile this code as a module, choose M here: the module will
+	  be called dm-verity.
+
+	  If unsure, say N.
+
 endif # MD

drivers/md/Makefile

@@ -42,6 +42,7 @@ obj-$(CONFIG_DM_LOG_USERSPACE)	+= dm-log-userspace.o
 obj-$(CONFIG_DM_ZERO)		+= dm-zero.o
 obj-$(CONFIG_DM_RAID)	+= dm-raid.o
 obj-$(CONFIG_DM_THIN_PROVISIONING)	+= dm-thin-pool.o
+obj-$(CONFIG_DM_VERITY)		+= dm-verity.o
 
 ifeq ($(CONFIG_DM_UEVENT),y)
 dm-mod-objs			+= dm-uevent.o