net: phy: Mask-out non-compatible modes when setting the max-speed

When setting a PHY's max speed using either the max-speed DT property
or ethtool, we should mask-out all non-compatible modes according to the
settings table, instead of just the 10/100BASET modes.
Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com>
Suggested-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/phy/phy-core.c

@@ -4,6 +4,7 @@
  */
 #include <linux/export.h>
 #include <linux/phy.h>
+#include <linux/of.h>
 
 const char *phy_speed_to_str(int speed)
 {
@@ -338,6 +339,50 @@ size_t phy_speeds(unsigned int *speeds, size_t size,
 	return count;
 }
 
+static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
+{
+	const struct phy_setting *p;
+	int i;
+
+	for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
+		if (p->speed > max_speed)
+			linkmode_clear_bit(p->bit, phydev->supported);
+		else
+			break;
+	}
+
+	return 0;
+}
+
+int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
+{
+	int err;
+
+	err = __set_phy_supported(phydev, max_speed);
+	if (err)
+		return err;
+
+	linkmode_copy(phydev->advertising, phydev->supported);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_set_max_speed);
+
+void of_set_phy_supported(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	u32 max_speed;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return;
+
+	if (!node)
+		return;
+
+	if (!of_property_read_u32(node, "max-speed", &max_speed))
+		__set_phy_supported(phydev, max_speed);
+}
+
 /**
  * phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
  * @phydev: The phy_device struct

drivers/net/phy/phy_device.c

@@ -1949,44 +1949,6 @@ int genphy_loopback(struct phy_device *phydev, bool enable)
 }
 EXPORT_SYMBOL(genphy_loopback);
 
-static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
-{
-	switch (max_speed) {
-	case SPEED_10:
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
-				   phydev->supported);
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-				   phydev->supported);
-		/* fall through */
-	case SPEED_100:
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-				   phydev->supported);
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-				   phydev->supported);
-		break;
-	case SPEED_1000:
-		break;
-	default:
-		return -ENOTSUPP;
-	}
-
-	return 0;
-}
-
-int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
-{
-	int err;
-
-	err = __set_phy_supported(phydev, max_speed);
-	if (err)
-		return err;
-
-	linkmode_copy(phydev->advertising, phydev->supported);
-
-	return 0;
-}
-EXPORT_SYMBOL(phy_set_max_speed);
-
 /**
  * phy_remove_link_mode - Remove a supported link mode
  * @phydev: phy_device structure to remove link mode from
@@ -2117,21 +2079,6 @@ bool phy_validate_pause(struct phy_device *phydev,
 }
 EXPORT_SYMBOL(phy_validate_pause);
 
-static void of_set_phy_supported(struct phy_device *phydev)
-{
-	struct device_node *node = phydev->mdio.dev.of_node;
-	u32 max_speed;
-
-	if (!IS_ENABLED(CONFIG_OF_MDIO))
-		return;
-
-	if (!node)
-		return;
-
-	if (!of_property_read_u32(node, "max-speed", &max_speed))
-		__set_phy_supported(phydev, max_speed);
-}
-
 static void of_set_phy_eee_broken(struct phy_device *phydev)
 {
 	struct device_node *node = phydev->mdio.dev.of_node;

include/linux/phy.h

@@ -673,6 +673,7 @@ phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
 		   bool exact);
 size_t phy_speeds(unsigned int *speeds, size_t size,
 		  unsigned long *mask);
+void of_set_phy_supported(struct phy_device *phydev);
 
 static inline bool __phy_is_started(struct phy_device *phydev)
 {