Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 a4e71e79 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge git://www.linux-watchdog.org/linux-watchdog 

Pull watchdog fixes from Wim Van Sebroeck:
 "Fix a boot issues and correct the AcpiMmioSel bitmask in the
  sp5100_tco watchdog device driver"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2
  watchdog: sp5100_tco: Remove code that may cause a boot failure
上级 c19b3b0f 81fc933f
隐藏空白更改
内联 并排
Showing with 7 addition and 121 deletion
drivers/watchdog/sp5100_tco.c
浏览文件 @ a4e71e79
......@@ -40,13 +40,12 @@
#include "sp5100_tco.h"
/* Module and version information */
#define TCO_VERSION "0.03"
#define TCO_VERSION "0.05"
#define TCO_MODULE_NAME "SP5100 TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
/* internal variables */
static u32 tcobase_phys;
static u32 resbase_phys;
static u32 tco_wdt_fired;
static void __iomem *tcobase;
static unsigned int pm_iobase;
......@@ -54,10 +53,6 @@ static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */
static unsigned long timer_alive;
static char tco_expect_close;
static struct pci_dev *sp5100_tco_pci;
static struct resource wdt_res = {
.name = "Watchdog Timer",
.flags = IORESOURCE_MEM,
};
/* the watchdog platform device */
static struct platform_device *sp5100_tco_platform_device;
......@@ -75,12 +70,6 @@ module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
" (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static unsigned int force_addr;
module_param(force_addr, uint, 0);
MODULE_PARM_DESC(force_addr, "Force the use of specified MMIO address."
" ONLY USE THIS PARAMETER IF YOU REALLY KNOW"
" WHAT YOU ARE DOING (default=none)");
/*
* Some TCO specific functions
*/
......@@ -176,39 +165,6 @@ static void tco_timer_enable(void)
}
}
static void tco_timer_disable(void)
{
int val;
if (sp5100_tco_pci->revision >= 0x40) {
/* For SB800 or later */
/* Enable watchdog decode bit and Disable watchdog timer */
outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG);
val = inb(SB800_IO_PM_DATA_REG);
val |= SB800_PCI_WATCHDOG_DECODE_EN;
val |= SB800_PM_WATCHDOG_DISABLE;
outb(val, SB800_IO_PM_DATA_REG);
} else {
/* For SP5100 or SB7x0 */
/* Enable watchdog decode bit */
pci_read_config_dword(sp5100_tco_pci,
SP5100_PCI_WATCHDOG_MISC_REG,
&val);
val |= SP5100_PCI_WATCHDOG_DECODE_EN;
pci_write_config_dword(sp5100_tco_pci,
SP5100_PCI_WATCHDOG_MISC_REG,
val);
/* Disable Watchdog timer */
outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
val = inb(SP5100_IO_PM_DATA_REG);
val |= SP5100_PM_WATCHDOG_DISABLE;
outb(val, SP5100_IO_PM_DATA_REG);
}
}
/*
* /dev/watchdog handling
*/
......@@ -361,7 +317,7 @@ static unsigned char sp5100_tco_setupdevice(void)
{
struct pci_dev *dev = NULL;
const char *dev_name = NULL;
u32 val, tmp_val;
u32 val;
u32 index_reg, data_reg, base_addr;
/* Match the PCI device */
......@@ -459,63 +415,8 @@ static unsigned char sp5100_tco_setupdevice(void)
} else
pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);
/*
* Lastly re-programming the watchdog timer MMIO address,
* This method is a last resort...
*
* Before re-programming, to ensure that the watchdog timer
* is disabled, disable the watchdog timer.
*/
tco_timer_disable();
if (force_addr) {
/*
* Force the use of watchdog timer MMIO address, and aligned to
* 8byte boundary.
*/
force_addr &= ~0x7;
val = force_addr;
pr_info("Force the use of 0x%04x as MMIO address\n", val);
} else {
/*
* Get empty slot into the resource tree for watchdog timer.
*/
if (allocate_resource(&iomem_resource,
&wdt_res,
SP5100_WDT_MEM_MAP_SIZE,
0xf0000000,
0xfffffff8,
0x8,
NULL,
NULL)) {
pr_err("MMIO allocation failed\n");
goto unreg_region;
}
val = resbase_phys = wdt_res.start;
pr_debug("Got 0x%04x from resource tree\n", val);
}
/* Restore to the low three bits */
outb(base_addr+0, index_reg);
tmp_val = val | (inb(data_reg) & 0x7);
/* Re-programming the watchdog timer base address */
outb(base_addr+0, index_reg);
outb((tmp_val >> 0) & 0xff, data_reg);
outb(base_addr+1, index_reg);
outb((tmp_val >> 8) & 0xff, data_reg);
outb(base_addr+2, index_reg);
outb((tmp_val >> 16) & 0xff, data_reg);
outb(base_addr+3, index_reg);
outb((tmp_val >> 24) & 0xff, data_reg);
if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
dev_name)) {
pr_err("MMIO address 0x%04x already in use\n", val);
goto unreg_resource;
}
pr_notice("failed to find MMIO address, giving up.\n");
goto unreg_region;
setup_wdt:
tcobase_phys = val;
......@@ -555,9 +456,6 @@ static unsigned char sp5100_tco_setupdevice(void)
unreg_mem_region:
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
unreg_resource:
if (resbase_phys)
release_resource(&wdt_res);
unreg_region:
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
exit:
......@@ -567,7 +465,6 @@ static unsigned char sp5100_tco_setupdevice(void)
static int sp5100_tco_init(struct platform_device *dev)
{
int ret;
char addr_str[16];
/*
* Check whether or not the hardware watchdog is there. If found, then
......@@ -599,23 +496,14 @@ static int sp5100_tco_init(struct platform_device *dev)
clear_bit(0, &timer_alive);
/* Show module parameters */
if (force_addr == tcobase_phys)
/* The force_addr is vaild */
sprintf(addr_str, "0x%04x", force_addr);
else
strcpy(addr_str, "none");
pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d, "
"force_addr=%s)\n",
tcobase, heartbeat, nowayout, addr_str);
pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
tcobase, heartbeat, nowayout);
return 0;
exit:
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
if (resbase_phys)
release_resource(&wdt_res);
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
return ret;
}
......@@ -630,8 +518,6 @@ static void sp5100_tco_cleanup(void)
misc_deregister(&sp5100_tco_miscdev);
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
if (resbase_phys)
release_resource(&wdt_res);
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
}
......
drivers/watchdog/sp5100_tco.h
浏览文件 @ a4e71e79
......@@ -57,7 +57,7 @@
#define SB800_PM_WATCHDOG_DISABLE (1 << 2)
#define SB800_PM_WATCHDOG_SECOND_RES (3 << 0)
#define SB800_ACPI_MMIO_DECODE_EN (1 << 0)
#define SB800_ACPI_MMIO_SEL (1 << 2)
#define SB800_ACPI_MMIO_SEL (1 << 1)
#define SB800_PM_WDT_MMIO_OFFSET 0xB00
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或