Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usb: Increase timeout value for device reset
  USB: put claimed interfaces in the "suspended" state
  USB: EHCI: defer reclamation of siTDs
  USB: fix remote wakeup settings during system sleep
  USB: pl2303: add AdLink ND-6530 USB IDs
  USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem.
  USB: OHCI: DA8xx/OMAP-L1x: fix up macro rename
  USB: qcaux: add LG Rumor and Sanyo Katana LX device IDs
  usb: wusb: don't overflow the Keep Alive IE buffer
  USB: ehci: omap: fix kernel panic with rmmod
  USB: fixed bug in usbsevseg using USB autosuspend incorrectly
  USB: ti_usb_3410_5052: adding multitech dialup fax/modem devices

drivers/usb/core/driver.c

@@ -301,7 +301,7 @@ static int usb_probe_interface(struct device *dev)
 
 	intf->condition = USB_INTERFACE_BINDING;
 
-	/* Bound interfaces are initially active.  They are
+	/* Probed interfaces are initially active.  They are
 	 * runtime-PM-enabled only if the driver has autosuspend support.
 	 * They are sensitive to their children's power states.
 	 */
@@ -437,11 +437,11 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 
 	iface->condition = USB_INTERFACE_BOUND;
 
-	/* Bound interfaces are initially active.  They are
+	/* Claimed interfaces are initially inactive (suspended).  They are
 	 * runtime-PM-enabled only if the driver has autosuspend support.
 	 * They are sensitive to their children's power states.
 	 */
-	pm_runtime_set_active(dev);
+	pm_runtime_set_suspended(dev);
 	pm_suspend_ignore_children(dev, false);
 	if (driver->supports_autosuspend)
 		pm_runtime_enable(dev);
@@ -1170,7 +1170,7 @@ static int usb_resume_interface(struct usb_device *udev,
 static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 {
 	int			status = 0;
-	int			i = 0;
+	int			i = 0, n = 0;
 	struct usb_interface	*intf;
 
 	if (udev->state == USB_STATE_NOTATTACHED ||
@@ -1179,7 +1179,8 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 
 	/* Suspend all the interfaces and then udev itself */
 	if (udev->actconfig) {
-		for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
+		n = udev->actconfig->desc.bNumInterfaces;
+		for (i = n - 1; i >= 0; --i) {
 			intf = udev->actconfig->interface[i];
 			status = usb_suspend_interface(udev, intf, msg);
 			if (status != 0)
@@ -1192,7 +1193,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	/* If the suspend failed, resume interfaces that did get suspended */
 	if (status != 0) {
 		msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
-		while (--i >= 0) {
+		while (++i < n) {
 			intf = udev->actconfig->interface[i];
 			usb_resume_interface(udev, intf, msg, 0);
 		}
@@ -1263,13 +1264,47 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
 	return status;
 }
 
+static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
+{
+	int			w, i;
+	struct usb_interface	*intf;
+
+	/* Remote wakeup is needed only when we actually go to sleep.
+	 * For things like FREEZE and QUIESCE, if the device is already
+	 * autosuspended then its current wakeup setting is okay.
+	 */
+	if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_QUIESCE) {
+		if (udev->state != USB_STATE_SUSPENDED)
+			udev->do_remote_wakeup = 0;
+		return;
+	}
+
+	/* If remote wakeup is permitted, see whether any interface drivers
+	 * actually want it.
+	 */
+	w = 0;
+	if (device_may_wakeup(&udev->dev) && udev->actconfig) {
+		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+			intf = udev->actconfig->interface[i];
+			w |= intf->needs_remote_wakeup;
+		}
+	}
+
+	/* If the device is autosuspended with the wrong wakeup setting,
+	 * autoresume now so the setting can be changed.
+	 */
+	if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup)
+		pm_runtime_resume(&udev->dev);
+	udev->do_remote_wakeup = w;
+}
+
 /* The device lock is held by the PM core */
 int usb_suspend(struct device *dev, pm_message_t msg)
 {
 	struct usb_device	*udev = to_usb_device(dev);
 
 	do_unbind_rebind(udev, DO_UNBIND);
-	udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+	choose_wakeup(udev, msg);
 	return usb_suspend_both(udev, msg);
 }
 

drivers/usb/host/ehci-hcd.c

@@ -543,6 +543,7 @@ static int ehci_init(struct usb_hcd *hcd)
 	 */
 	ehci->periodic_size = DEFAULT_I_TDPS;
 	INIT_LIST_HEAD(&ehci->cached_itd_list);
+	INIT_LIST_HEAD(&ehci->cached_sitd_list);
 	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
 		return retval;
 

drivers/usb/host/ehci-hub.c

@@ -801,7 +801,7 @@ static int ehci_hub_control (
 			 * this bit; seems too long to spin routinely...
 			 */
 			retval = handshake(ehci, status_reg,
-					PORT_RESET, 0, 750);
+					PORT_RESET, 0, 1000);
 			if (retval != 0) {
 				ehci_err (ehci, "port %d reset error %d\n",
 					wIndex + 1, retval);

drivers/usb/host/ehci-mem.c

@@ -136,7 +136,7 @@ static inline void qh_put (struct ehci_qh *qh)
 
 static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 {
-	free_cached_itd_list(ehci);
+	free_cached_lists(ehci);
 	if (ehci->async)
 		qh_put (ehci->async);
 	ehci->async = NULL;

drivers/usb/host/ehci-omap.c

@@ -629,11 +629,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 		}
 		snprintf(supply, sizeof(supply), "hsusb%d", i);
 		omap->regulator[i] = regulator_get(omap->dev, supply);
-		if (IS_ERR(omap->regulator[i]))
+		if (IS_ERR(omap->regulator[i])) {
+			omap->regulator[i] = NULL;
 			dev_dbg(&pdev->dev,
 			"failed to get ehci port%d regulator\n", i);
-		else
+		} else {
 			regulator_enable(omap->regulator[i]);
+		}
 	}
 
 	ret = omap_start_ehc(omap, hcd);

drivers/usb/host/ehci-sched.c

@@ -510,7 +510,7 @@ static int disable_periodic (struct ehci_hcd *ehci)
 	ehci_writel(ehci, cmd, &ehci->regs->command);
 	/* posted write ... */
 
-	free_cached_itd_list(ehci);
+	free_cached_lists(ehci);
 
 	ehci->next_uframe = -1;
 	return 0;
@@ -2139,13 +2139,27 @@ sitd_complete (
 			(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
 	}
 	iso_stream_put (ehci, stream);
-	/* OK to recycle this SITD now that its completion callback ran. */
+
 done:
 	sitd->urb = NULL;
-	sitd->stream = NULL;
-	list_move(&sitd->sitd_list, &stream->free_list);
-	iso_stream_put(ehci, stream);
-
+	if (ehci->clock_frame != sitd->frame) {
+		/* OK to recycle this SITD now. */
+		sitd->stream = NULL;
+		list_move(&sitd->sitd_list, &stream->free_list);
+		iso_stream_put(ehci, stream);
+	} else {
+		/* HW might remember this SITD, so we can't recycle it yet.
+		 * Move it to a safe place until a new frame starts.
+		 */
+		list_move(&sitd->sitd_list, &ehci->cached_sitd_list);
+		if (stream->refcount == 2) {
+			/* If iso_stream_put() were called here, stream
+			 * would be freed.  Instead, just prevent reuse.
+			 */
+			stream->ep->hcpriv = NULL;
+			stream->ep = NULL;
+		}
+	}
 	return retval;
 }
 
@@ -2211,9 +2225,10 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
 
 /*-------------------------------------------------------------------------*/
 
-static void free_cached_itd_list(struct ehci_hcd *ehci)
+static void free_cached_lists(struct ehci_hcd *ehci)
 {
 	struct ehci_itd *itd, *n;
+	struct ehci_sitd *sitd, *sn;
 
 	list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
 		struct ehci_iso_stream	*stream = itd->stream;
@@ -2221,6 +2236,13 @@ static void free_cached_itd_list(struct ehci_hcd *ehci)
 		list_move(&itd->itd_list, &stream->free_list);
 		iso_stream_put(ehci, stream);
 	}
+
+	list_for_each_entry_safe(sitd, sn, &ehci->cached_sitd_list, sitd_list) {
+		struct ehci_iso_stream	*stream = sitd->stream;
+		sitd->stream = NULL;
+		list_move(&sitd->sitd_list, &stream->free_list);
+		iso_stream_put(ehci, stream);
+	}
 }
 
 /*-------------------------------------------------------------------------*/
@@ -2247,7 +2269,7 @@ scan_periodic (struct ehci_hcd *ehci)
 		clock_frame = -1;
 	}
 	if (ehci->clock_frame != clock_frame) {
-		free_cached_itd_list(ehci);
+		free_cached_lists(ehci);
 		ehci->clock_frame = clock_frame;
 	}
 	clock %= mod;
@@ -2414,7 +2436,7 @@ scan_periodic (struct ehci_hcd *ehci)
 			clock = now;
 			clock_frame = clock >> 3;
 			if (ehci->clock_frame != clock_frame) {
-				free_cached_itd_list(ehci);
+				free_cached_lists(ehci);
 				ehci->clock_frame = clock_frame;
 			}
 		} else {

drivers/usb/host/ehci.h

@@ -87,8 +87,9 @@ struct ehci_hcd {			/* one per controller */
 	int			next_uframe;	/* scan periodic, start here */
 	unsigned		periodic_sched;	/* periodic activity count */
 
-	/* list of itds completed while clock_frame was still active */
+	/* list of itds & sitds completed while clock_frame was still active */
 	struct list_head	cached_itd_list;
+	struct list_head	cached_sitd_list;
 	unsigned		clock_frame;
 
 	/* per root hub port */
@@ -195,7 +196,7 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
 	clear_bit (action, &ehci->actions);
 }
 
-static void free_cached_itd_list(struct ehci_hcd *ehci);
+static void free_cached_lists(struct ehci_hcd *ehci);
 
 /*-------------------------------------------------------------------------*/
 

drivers/usb/host/ohci-da8xx.c

@@ -23,7 +23,7 @@
 #error "This file is DA8xx bus glue.  Define CONFIG_ARCH_DAVINCI_DA8XX."
 #endif
 
-#define CFGCHIP2	DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)
+#define CFGCHIP2	DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)
 
 static struct clk *usb11_clk;
 static struct clk *usb20_clk;

drivers/usb/misc/usbsevseg.c

@@ -49,6 +49,7 @@ struct usb_sevsegdev {
 	u16 textlength;
 
 	u8 shadow_power; /* for PM */
+	u8 has_interface_pm;
 };
 
 /* sysfs_streq can't replace this completely
@@ -68,12 +69,16 @@ static void update_display_powered(struct usb_sevsegdev *mydev)
 {
 	int rc;
 
-	if (!mydev->shadow_power && mydev->powered) {
+	if (mydev->powered && !mydev->has_interface_pm) {
 		rc = usb_autopm_get_interface(mydev->intf);
 		if (rc < 0)
 			return;
+		mydev->has_interface_pm = 1;
 	}
 
+	if (mydev->shadow_power != 1)
+		return;
+
 	rc = usb_control_msg(mydev->udev,
 			usb_sndctrlpipe(mydev->udev, 0),
 			0x12,
@@ -86,8 +91,10 @@ static void update_display_powered(struct usb_sevsegdev *mydev)
 	if (rc < 0)
 		dev_dbg(&mydev->udev->dev, "power retval = %d\n", rc);
 
-	if (mydev->shadow_power && !mydev->powered)
+	if (!mydev->powered && mydev->has_interface_pm) {
 		usb_autopm_put_interface(mydev->intf);
+		mydev->has_interface_pm = 0;
+	}
 }
 
 static void update_display_mode(struct usb_sevsegdev *mydev)
@@ -351,6 +358,10 @@ static int sevseg_probe(struct usb_interface *interface,
 	mydev->intf = interface;
 	usb_set_intfdata(interface, mydev);
 
+	/* PM */
+	mydev->shadow_power = 1; /* currently active */
+	mydev->has_interface_pm = 0; /* have not issued autopm_get */
+
 	/*set defaults */
 	mydev->textmode = 0x02; /* ascii mode */
 	mydev->mode_msb = 0x06; /* 6 characters */

drivers/usb/serial/pl2303.c

@@ -97,6 +97,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/pl2303.h

@@ -134,3 +134,7 @@
 /* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
 #define SANWA_VENDOR_ID		0x11ad
 #define SANWA_PRODUCT_ID	0x0001
+
+/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+#define ADLINK_VENDOR_ID        0x0b63
+#define ADLINK_ND6530_PRODUCT_ID       0x6530

drivers/usb/serial/qcaux.c

@@ -42,6 +42,14 @@
 #define CMOTECH_PRODUCT_CDU550			0x5553
 #define CMOTECH_PRODUCT_CDX650			0x6512
 
+/* LG devices */
+#define LG_VENDOR_ID				0x1004
+#define LG_PRODUCT_VX4400_6000			0x6000 /* VX4400/VX6000/Rumor */
+
+/* Sanyo devices */
+#define SANYO_VENDOR_ID				0x0474
+#define SANYO_PRODUCT_KATANA_LX			0x0754 /* SCP-3800 (Katana LX) */
+
 static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
@@ -51,6 +59,8 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

drivers/usb/serial/sierra.c

@@ -230,6 +230,7 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 	{ USB_DEVICE(0x03F0, 0x1B1D) },	/* HP ev2200 a.k.a MC5720 */
+	{ USB_DEVICE(0x03F0, 0x211D) }, /* HP ev2210 a.k.a MC5725 */
 	{ USB_DEVICE(0x03F0, 0x1E1D) },	/* HP hs2300 a.k.a MC8775 */
 
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */

drivers/usb/serial/ti_usb_3410_5052.c

@@ -172,7 +172,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -180,6 +180,9 @@ static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
@@ -192,7 +195,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -200,6 +203,9 @@ static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1]
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
@@ -287,6 +293,8 @@ MODULE_FIRMWARE("ti_5052.fw");
 MODULE_FIRMWARE("mts_cdma.fw");
 MODULE_FIRMWARE("mts_gsm.fw");
 MODULE_FIRMWARE("mts_edge.fw");
+MODULE_FIRMWARE("mts_mt9234mu.fw");
+MODULE_FIRMWARE("mts_mt9234zba.fw");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
@@ -1687,6 +1695,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 	const struct firmware *fw_p;
 	char buf[32];
 
+	dbg("%s\n", __func__);
 	/* try ID specific firmware first, then try generic firmware */
 	sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
 	    dev->descriptor.idProduct);
@@ -1703,7 +1712,15 @@ static int ti_download_firmware(struct ti_device *tdev)
 			case MTS_EDGE_PRODUCT_ID:
 				strcpy(buf, "mts_edge.fw");
 				break;
-			}
+			case MTS_MT9234MU_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234mu.fw");
+				break;
+			case MTS_MT9234ZBA_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234zba.fw");
+				break;
+			case MTS_MT9234ZBAOLD_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234zba.fw");
+				break;			}
 		}
 		if (buf[0] == '\0') {
 			if (tdev->td_is_3410)
@@ -1718,7 +1735,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 		return -ENOENT;
 	}
 	if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
-		dev_err(&dev->dev, "%s - firmware too large\n", __func__);
+		dev_err(&dev->dev, "%s - firmware too large %d \n", __func__, fw_p->size);
 		return -ENOENT;
 	}
 
@@ -1730,6 +1747,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
 	} else {
+		dbg("%s ENOMEM\n", __func__);
 		status = -ENOMEM;
 	}
 	release_firmware(fw_p);

drivers/usb/serial/ti_usb_3410_5052.h

@@ -45,6 +45,9 @@
 #define MTS_CDMA_PRODUCT_ID		0xF110
 #define MTS_GSM_PRODUCT_ID		0xF111
 #define MTS_EDGE_PRODUCT_ID		0xF112
+#define MTS_MT9234MU_PRODUCT_ID		0xF114
+#define MTS_MT9234ZBA_PRODUCT_ID	0xF115
+#define MTS_MT9234ZBAOLD_PRODUCT_ID	0x0319
 
 /* Commands */
 #define TI_GET_VERSION			0x01

drivers/usb/wusbcore/devconnect.c

@@ -438,7 +438,7 @@ static void __wusbhc_keep_alive(struct wusbhc *wusbhc)
 	old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr);
 	keep_alives = 0;
 	for (cnt = 0;
-	     keep_alives <= WUIE_ELT_MAX && cnt < wusbhc->ports_max;
+	     keep_alives < WUIE_ELT_MAX && cnt < wusbhc->ports_max;
 	     cnt++) {
 		unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout);