提交 a4010afe 编写于 作者: J Jesse Brandeburg 提交者: Jeff Kirsher

e1000: convert hardware management from timers to threads

Thomas Gleixner (tglx) reported that e1000 was delaying for many milliseconds
(using mdelay) from inside timer/interrupt context.  None of these paths are
performance critical and can be moved into threads/work items.  This patch
implements the work items and the next patch changes the mdelays to msleeps.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 19d478bb
......@@ -214,9 +214,6 @@ struct e1000_rx_ring {
/* board specific private data structure */
struct e1000_adapter {
struct timer_list tx_fifo_stall_timer;
struct timer_list watchdog_timer;
struct timer_list phy_info_timer;
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
u16 mng_vlan_id;
u32 bd_number;
......@@ -237,7 +234,6 @@ struct e1000_adapter {
u16 tx_itr;
u16 rx_itr;
struct work_struct reset_task;
u8 fc_autoneg;
/* TX */
......@@ -310,8 +306,10 @@ struct e1000_adapter {
bool discarding;
struct work_struct fifo_stall_task;
struct work_struct phy_info_task;
struct work_struct reset_task;
struct delayed_work watchdog_task;
struct delayed_work fifo_stall_task;
struct delayed_work phy_info_task;
};
enum e1000_state_t {
......
......@@ -131,10 +131,8 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring);
static void e1000_set_rx_mode(struct net_device *netdev);
static void e1000_update_phy_info(unsigned long data);
static void e1000_update_phy_info_task(struct work_struct *work);
static void e1000_watchdog(unsigned long data);
static void e1000_82547_tx_fifo_stall(unsigned long data);
static void e1000_watchdog(struct work_struct *work);
static void e1000_82547_tx_fifo_stall_task(struct work_struct *work);
static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
struct net_device *netdev);
......@@ -493,6 +491,15 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
return;
}
static void e1000_down_and_stop(struct e1000_adapter *adapter)
{
set_bit(__E1000_DOWN, &adapter->flags);
cancel_work_sync(&adapter->reset_task);
cancel_delayed_work_sync(&adapter->watchdog_task);
cancel_delayed_work_sync(&adapter->phy_info_task);
cancel_delayed_work_sync(&adapter->fifo_stall_task);
}
void e1000_down(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
......@@ -522,13 +529,9 @@ void e1000_down(struct e1000_adapter *adapter)
/*
* Setting DOWN must be after irq_disable to prevent
* a screaming interrupt. Setting DOWN also prevents
* timers and tasks from rescheduling.
* tasks from rescheduling.
*/
set_bit(__E1000_DOWN, &adapter->flags);
del_timer_sync(&adapter->tx_fifo_stall_timer);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
e1000_down_and_stop(adapter);
adapter->link_speed = 0;
adapter->link_duplex = 0;
......@@ -1120,21 +1123,12 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (!is_valid_ether_addr(netdev->perm_addr))
e_err(probe, "Invalid MAC Address\n");
init_timer(&adapter->tx_fifo_stall_timer);
adapter->tx_fifo_stall_timer.function = e1000_82547_tx_fifo_stall;
adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
init_timer(&adapter->watchdog_timer);
adapter->watchdog_timer.function = e1000_watchdog;
adapter->watchdog_timer.data = (unsigned long) adapter;
init_timer(&adapter->phy_info_timer);
adapter->phy_info_timer.function = e1000_update_phy_info;
adapter->phy_info_timer.data = (unsigned long)adapter;
INIT_WORK(&adapter->fifo_stall_task, e1000_82547_tx_fifo_stall_task);
INIT_DELAYED_WORK(&adapter->watchdog_task, e1000_watchdog);
INIT_DELAYED_WORK(&adapter->fifo_stall_task,
e1000_82547_tx_fifo_stall_task);
INIT_DELAYED_WORK(&adapter->phy_info_task, e1000_update_phy_info_task);
INIT_WORK(&adapter->reset_task, e1000_reset_task);
INIT_WORK(&adapter->phy_info_task, e1000_update_phy_info_task);
e1000_check_options(adapter);
......@@ -1279,13 +1273,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
set_bit(__E1000_DOWN, &adapter->flags);
del_timer_sync(&adapter->tx_fifo_stall_timer);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
cancel_work_sync(&adapter->reset_task);
e1000_down_and_stop(adapter);
e1000_release_manageability(adapter);
unregister_netdev(netdev);
......@@ -1369,7 +1357,7 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
* The open entry point is called when a network interface is made
* active by the system (IFF_UP). At this point all resources needed
* for transmit and receive operations are allocated, the interrupt
* handler is registered with the OS, the watchdog timer is started,
* handler is registered with the OS, the watchdog task is started,
* and the stack is notified that the interface is ready.
**/
......@@ -2331,37 +2319,23 @@ static void e1000_set_rx_mode(struct net_device *netdev)
kfree(mcarray);
}
/* Need to wait a few seconds after link up to get diagnostic information from
* the phy */
static void e1000_update_phy_info(unsigned long data)
{
struct e1000_adapter *adapter = (struct e1000_adapter *)data;
schedule_work(&adapter->phy_info_task);
}
/**
* e1000_update_phy_info_task - get phy info
* @work: work struct contained inside adapter struct
*
* Need to wait a few seconds after link up to get diagnostic information from
* the phy
*/
static void e1000_update_phy_info_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter,
phy_info_task);
struct e1000_hw *hw = &adapter->hw;
struct e1000_adapter,
phy_info_task.work);
rtnl_lock();
e1000_phy_get_info(hw, &adapter->phy_info);
e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
rtnl_unlock();
}
/**
* e1000_82547_tx_fifo_stall - Timer Call-back
* @data: pointer to adapter cast into an unsigned long
**/
static void e1000_82547_tx_fifo_stall(unsigned long data)
{
struct e1000_adapter *adapter = (struct e1000_adapter *)data;
schedule_work(&adapter->fifo_stall_task);
}
/**
* e1000_82547_tx_fifo_stall_task - task to complete work
* @work: work struct contained inside adapter struct
......@@ -2369,8 +2343,8 @@ static void e1000_82547_tx_fifo_stall(unsigned long data)
static void e1000_82547_tx_fifo_stall_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter,
fifo_stall_task);
struct e1000_adapter,
fifo_stall_task.work);
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
u32 tctl;
......@@ -2393,7 +2367,7 @@ static void e1000_82547_tx_fifo_stall_task(struct work_struct *work)
atomic_set(&adapter->tx_fifo_stall, 0);
netif_wake_queue(netdev);
} else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
schedule_delayed_work(&adapter->fifo_stall_task, 1);
}
}
rtnl_unlock();
......@@ -2437,12 +2411,14 @@ bool e1000_has_link(struct e1000_adapter *adapter)
}
/**
* e1000_watchdog - Timer Call-back
* @data: pointer to adapter cast into an unsigned long
* e1000_watchdog - work function
* @work: work struct contained inside adapter struct
**/
static void e1000_watchdog(unsigned long data)
static void e1000_watchdog(struct work_struct *work)
{
struct e1000_adapter *adapter = (struct e1000_adapter *)data;
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter,
watchdog_task.work);
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
struct e1000_tx_ring *txdr = adapter->tx_ring;
......@@ -2493,8 +2469,8 @@ static void e1000_watchdog(unsigned long data)
netif_carrier_on(netdev);
if (!test_bit(__E1000_DOWN, &adapter->flags))
mod_timer(&adapter->phy_info_timer,
round_jiffies(jiffies + 2 * HZ));
schedule_delayed_work(&adapter->phy_info_task,
2 * HZ);
adapter->smartspeed = 0;
}
} else {
......@@ -2506,8 +2482,8 @@ static void e1000_watchdog(unsigned long data)
netif_carrier_off(netdev);
if (!test_bit(__E1000_DOWN, &adapter->flags))
mod_timer(&adapter->phy_info_timer,
round_jiffies(jiffies + 2 * HZ));
schedule_delayed_work(&adapter->phy_info_task,
2 * HZ);
}
e1000_smartspeed(adapter);
......@@ -2563,10 +2539,9 @@ static void e1000_watchdog(unsigned long data)
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = true;
/* Reset the timer */
/* Reschedule the task */
if (!test_bit(__E1000_DOWN, &adapter->flags))
mod_timer(&adapter->watchdog_timer,
round_jiffies(jiffies + 2 * HZ));
schedule_delayed_work(&adapter->watchdog_task, 2 * HZ);
}
enum latency_range {
......@@ -3206,14 +3181,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
return NETDEV_TX_BUSY;
if (unlikely(hw->mac_type == e1000_82547)) {
if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
netif_stop_queue(netdev);
if (!test_bit(__E1000_DOWN, &adapter->flags))
mod_timer(&adapter->tx_fifo_stall_timer,
jiffies + 1);
return NETDEV_TX_BUSY;
}
if (unlikely((hw->mac_type == e1000_82547) &&
(e1000_82547_fifo_workaround(adapter, skb)))) {
netif_stop_queue(netdev);
if (!test_bit(__E1000_DOWN, &adapter->flags))
schedule_delayed_work(&adapter->fifo_stall_task, 1);
return NETDEV_TX_BUSY;
}
if (vlan_tx_tag_present(skb)) {
......@@ -3283,7 +3256,7 @@ static void e1000_reset_task(struct work_struct *work)
* @netdev: network interface device structure
*
* Returns the address of the device statistics structure.
* The statistics are actually updated from the timer callback.
* The statistics are actually updated from the watchdog.
**/
static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
......@@ -3551,7 +3524,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
hw->get_link_status = 1;
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->flags))
mod_timer(&adapter->watchdog_timer, jiffies + 1);
schedule_delayed_work(&adapter->watchdog_task, 1);
}
/* disable interrupts, without the synchronize_irq bit */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册