提交 a3f8168b 编写于 作者: J Johan Hovold 提交者: Greg Kroah-Hartman

USB: ftdi_sio: clean up modem status handling

Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 66e47e60
......@@ -2341,6 +2341,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
int len;
int ret;
dbg("%s TIOCMGET", __func__);
......@@ -2348,18 +2349,13 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
buf = kmalloc(2, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/*
* The 8U232AM returns a two byte value (the SIO a 1 byte value) in
* the same format as the data returned from the in point.
*/
switch (priv->chip_type) {
case SIO:
/* Request the status from the device */
ret = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, 0,
buf, 1, WDR_TIMEOUT);
if (ret < 0)
goto out;
len = 1;
break;
case FT8U232AM:
case FT232BM:
......@@ -2367,23 +2363,22 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
case FT232RL:
case FT2232H:
case FT4232H:
/* the 8U232AM returns a two byte value (the sio is a 1 byte
value) - in the same format as the data returned from the in
point */
ret = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, priv->interface,
buf, 2, WDR_TIMEOUT);
if (ret < 0)
goto out;
len = 2;
break;
default:
ret = -EFAULT;
goto out;
}
ret = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, priv->interface,
buf, len, WDR_TIMEOUT);
if (ret < 0)
goto out;
ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
(buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册