提交 a35f5de7 编写于 作者: A Alan Cox 提交者: David S. Miller

3c501: Bring into compliance with the coding style

3c501 leads the way... 8)
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 68d579fb
......@@ -17,7 +17,7 @@
Annapolis MD 21403
Fixed (again!) the missing interrupt locking on TX/RX shifting.
Alan Cox <Alan.Cox@linux.org>
Alan Cox <Alan.Cox@linux.org>
Removed calls to init_etherdev since they are no longer needed, and
cleaned up modularization just a bit. The driver still allows only
......@@ -29,16 +29,16 @@
the board. Now getting 150K/second FTP with a 3c501 card. Still playing
with a TX-TX optimisation to see if we can touch 180-200K/second as seems
theoretically maximum.
19950402 Alan Cox <Alan.Cox@linux.org>
19950402 Alan Cox <Alan.Cox@linux.org>
Cleaned up for 2.3.x because we broke SMP now.
20000208 Alan Cox <alan@redhat.com>
20000208 Alan Cox <alan@redhat.com>
Check up pass for 2.5. Nothing significant changed
20021009 Alan Cox <alan@redhat.com>
20021009 Alan Cox <alan@redhat.com>
Fixed zero fill corner case
20030104 Alan Cox <alan@redhat.com>
20030104 Alan Cox <alan@redhat.com>
For the avoidance of doubt the "preferred form" of this code is one which
......@@ -139,8 +139,8 @@ static const char version[] =
* The boilerplate probe code.
*/
static int io=0x280;
static int irq=5;
static int io = 0x280;
static int irq = 5;
static int mem_start;
/**
......@@ -229,8 +229,7 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
* Read the station address PROM data from the special port.
*/
for (i = 0; i < 6; i++)
{
for (i = 0; i < 6; i++) {
outw(i, ioaddr + EL1_DATAPTR);
station_addr[i] = inb(ioaddr + EL1_SAPROM);
}
......@@ -240,28 +239,24 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
*/
if (station_addr[0] == 0x02 && station_addr[1] == 0x60
&& station_addr[2] == 0x8c)
{
&& station_addr[2] == 0x8c)
mname = "3c501";
} else if (station_addr[0] == 0x00 && station_addr[1] == 0x80
&& station_addr[2] == 0xC8)
{
else if (station_addr[0] == 0x00 && station_addr[1] == 0x80
&& station_addr[2] == 0xC8)
mname = "NP943";
}
else {
else {
release_region(ioaddr, EL1_IO_EXTENT);
return -ENODEV;
}
/*
* We auto-IRQ by shutting off the interrupt line and letting it float
* high.
* We auto-IRQ by shutting off the interrupt line and letting it
* float high.
*/
dev->irq = irq;
if (dev->irq < 2)
{
if (dev->irq < 2) {
unsigned long irq_mask;
irq_mask = probe_irq_on();
......@@ -274,8 +269,7 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
mdelay(20);
autoirq = probe_irq_off(irq_mask);
if (autoirq == 0)
{
if (autoirq == 0) {
printk(KERN_WARNING "%s probe at %#x failed to detect IRQ line.\n",
mname, ioaddr);
release_region(ioaddr, EL1_IO_EXTENT);
......@@ -292,7 +286,8 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
if (autoirq)
dev->irq = autoirq;
printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n", dev->name, mname, dev->base_addr,
printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
dev->name, mname, dev->base_addr,
autoirq ? "auto":"assigned ", dev->irq);
#ifdef CONFIG_IP_MULTICAST
......@@ -343,7 +338,8 @@ static int el_open(struct net_device *dev)
if (el_debug > 2)
printk(KERN_DEBUG "%s: Doing el_open()...", dev->name);
if ((retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev)))
retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev);
if (retval)
return retval;
spin_lock_irqsave(&lp->lock, flags);
......@@ -371,8 +367,9 @@ static void el_timeout(struct net_device *dev)
int ioaddr = dev->base_addr;
if (el_debug)
printk (KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
dev->name, inb(TX_STATUS), inb(AX_STATUS), inb(RX_STATUS));
printk(KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
dev->name, inb(TX_STATUS),
inb(AX_STATUS), inb(RX_STATUS));
dev->stats.tx_errors++;
outb(TX_NORM, TX_CMD);
outb(RX_NORM, RX_CMD);
......@@ -425,8 +422,7 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
netif_stop_queue(dev);
do
{
do {
int len = skb->len;
int pad = 0;
int gp_start;
......@@ -435,10 +431,10 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (len < ETH_ZLEN)
pad = ETH_ZLEN - len;
gp_start = 0x800 - ( len + pad );
gp_start = 0x800 - (len + pad);
lp->tx_pkt_start = gp_start;
lp->collisions = 0;
lp->collisions = 0;
dev->stats.tx_bytes += skb->len;
......@@ -455,37 +451,42 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
lp->txing = 1;
/*
* Turn interrupts back on while we spend a pleasant afternoon
* loading bytes into the board
* Turn interrupts back on while we spend a pleasant
* afternoon loading bytes into the board
*/
spin_unlock_irqrestore(&lp->lock, flags);
outw(0x00, RX_BUF_CLR); /* Set rx packet area to 0. */
outw(gp_start, GP_LOW); /* aim - packet will be loaded into buffer start */
outsb(DATAPORT,buf,len); /* load buffer (usual thing each byte increments the pointer) */
/* Set rx packet area to 0. */
outw(0x00, RX_BUF_CLR);
/* aim - packet will be loaded into buffer start */
outw(gp_start, GP_LOW);
/* load buffer (usual thing each byte increments the pointer) */
outsb(DATAPORT, buf, len);
if (pad) {
while(pad--) /* Zero fill buffer tail */
while (pad--) /* Zero fill buffer tail */
outb(0, DATAPORT);
}
outw(gp_start, GP_LOW); /* the board reuses the same register */
/* the board reuses the same register */
outw(gp_start, GP_LOW);
if(lp->loading != 2)
{
outb(AX_XMIT, AX_CMD); /* fire ... Trigger xmit. */
lp->loading=0;
if (lp->loading != 2) {
/* fire ... Trigger xmit. */
outb(AX_XMIT, AX_CMD);
lp->loading = 0;
dev->trans_start = jiffies;
if (el_debug > 2)
printk(KERN_DEBUG " queued xmit.\n");
dev_kfree_skb (skb);
dev_kfree_skb(skb);
return 0;
}
/* A receive upset our load, despite our best efforts */
if(el_debug>2)
printk(KERN_DEBUG "%s: burped during tx load.\n", dev->name);
if (el_debug > 2)
printk(KERN_DEBUG "%s: burped during tx load.\n",
dev->name);
spin_lock_irqsave(&lp->lock, flags);
}
while(1);
while (1);
}
......@@ -534,64 +535,59 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
*/
if (el_debug > 3)
printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x", dev->name, axsr);
if(lp->loading==1 && !lp->txing)
printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
dev->name);
if (lp->txing)
{
printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x",
dev->name, axsr);
/*
* Board in transmit mode. May be loading. If we are
* loading we shouldn't have got this.
*/
if (lp->loading == 1 && !lp->txing)
printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
dev->name);
if (lp->txing) {
/*
* Board in transmit mode. May be loading. If we are
* loading we shouldn't have got this.
*/
int txsr = inb(TX_STATUS);
if(lp->loading==1)
{
if(el_debug > 2)
{
printk(KERN_DEBUG "%s: Interrupt while loading [", dev->name);
printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x]\n", txsr, inw(GP_LOW),inw(RX_LOW));
if (lp->loading == 1) {
if (el_debug > 2) {
printk(KERN_DEBUG "%s: Interrupt while loading [",
dev->name);
printk(" txsr=%02x gp=%04x rp=%04x]\n",
txsr, inw(GP_LOW), inw(RX_LOW));
}
lp->loading=2; /* Force a reload */
/* Force a reload */
lp->loading = 2;
spin_unlock(&lp->lock);
goto out;
}
if (el_debug > 6)
printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x", txsr, inw(GP_LOW),inw(RX_LOW));
printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x",
txsr, inw(GP_LOW), inw(RX_LOW));
if ((axsr & 0x80) && (txsr & TX_READY) == 0)
{
if ((axsr & 0x80) && (txsr & TX_READY) == 0) {
/*
* FIXME: is there a logic to whether to keep on trying or
* reset immediately ?
* FIXME: is there a logic to whether to keep
* on trying or reset immediately ?
*/
if(el_debug>1)
printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x"
" gp=%03x rp=%03x.\n", dev->name, txsr, axsr,
inw(ioaddr + EL1_DATAPTR), inw(ioaddr + EL1_RXPTR));
if (el_debug > 1)
printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
dev->name, txsr, axsr,
inw(ioaddr + EL1_DATAPTR),
inw(ioaddr + EL1_RXPTR));
lp->txing = 0;
netif_wake_queue(dev);
}
else if (txsr & TX_16COLLISIONS)
{
} else if (txsr & TX_16COLLISIONS) {
/*
* Timed out
*/
if (el_debug)
printk (KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n",dev->name);
printk(KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
outb(AX_SYS, AX_CMD);
lp->txing = 0;
dev->stats.tx_aborted_errors++;
netif_wake_queue(dev);
}
else if (txsr & TX_COLLISION)
{
} else if (txsr & TX_COLLISION) {
/*
* Retrigger xmit.
*/
......@@ -599,7 +595,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
if (el_debug > 6)
printk(KERN_DEBUG " retransmitting after a collision.\n");
/*
* Poor little chip can't reset its own start pointer
* Poor little chip can't reset its own start
* pointer
*/
outb(AX_SYS, AX_CMD);
......@@ -608,53 +605,45 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
dev->stats.collisions++;
spin_unlock(&lp->lock);
goto out;
}
else
{
} else {
/*
* It worked.. we will now fall through and receive
*/
dev->stats.tx_packets++;
if (el_debug > 6)
printk(KERN_DEBUG " Tx succeeded %s\n",
(txsr & TX_RDY) ? "." : "but tx is busy!");
(txsr & TX_RDY) ? "." : "but tx is busy!");
/*
* This is safe the interrupt is atomic WRT itself.
*/
lp->txing = 0;
netif_wake_queue(dev); /* In case more to transmit */
/* In case more to transmit */
netif_wake_queue(dev);
}
}
else
{
/*
* In receive mode.
*/
} else {
/*
* In receive mode.
*/
int rxsr = inb(RX_STATUS);
if (el_debug > 5)
printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS),inw(RX_LOW));
printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS), inw(RX_LOW));
/*
* Just reading rx_status fixes most errors.
*/
if (rxsr & RX_MISSED)
dev->stats.rx_missed_errors++;
else if (rxsr & RX_RUNT)
{ /* Handled to avoid board lock-up. */
else if (rxsr & RX_RUNT) {
/* Handled to avoid board lock-up. */
dev->stats.rx_length_errors++;
if (el_debug > 5)
printk(KERN_DEBUG " runt.\n");
}
else if (rxsr & RX_GOOD)
{
} else if (rxsr & RX_GOOD) {
/*
* Receive worked.
*/
el_receive(dev);
}
else
{
} else {
/*
* Nothing? Something is broken!
*/
......@@ -702,8 +691,7 @@ static void el_receive(struct net_device *dev)
if (el_debug > 4)
printk(KERN_DEBUG " el_receive %d.\n", pkt_len);
if ((pkt_len < 60) || (pkt_len > 1536))
{
if (pkt_len < 60 || pkt_len > 1536) {
if (el_debug)
printk(KERN_DEBUG "%s: bogus packet, length=%d\n", dev->name, pkt_len);
dev->stats.rx_over_errors++;
......@@ -722,26 +710,23 @@ static void el_receive(struct net_device *dev)
*/
outw(0x00, GP_LOW);
if (skb == NULL)
{
if (skb == NULL) {
printk(KERN_INFO "%s: Memory squeeze, dropping packet.\n", dev->name);
dev->stats.rx_dropped++;
return;
}
else
{
skb_reserve(skb,2); /* Force 16 byte alignment */
} else {
skb_reserve(skb, 2); /* Force 16 byte alignment */
/*
* The read increments through the bytes. The interrupt
* handler will fix the pointer when it returns to
* receive mode.
*/
insb(DATAPORT, skb_put(skb,pkt_len), pkt_len);
skb->protocol=eth_type_trans(skb,dev);
insb(DATAPORT, skb_put(skb, pkt_len), pkt_len);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
dev->stats.rx_packets++;
dev->stats.rx_bytes+=pkt_len;
dev->stats.rx_bytes += pkt_len;
}
return;
}
......@@ -760,7 +745,7 @@ static void el_reset(struct net_device *dev)
struct net_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
if (el_debug> 2)
if (el_debug > 2)
printk(KERN_INFO "3c501 reset...");
outb(AX_RESET, AX_CMD); /* Reset the chip */
outb(AX_LOOP, AX_CMD); /* Aux control, irq and loopback enabled */
......@@ -794,7 +779,8 @@ static int el1_close(struct net_device *dev)
int ioaddr = dev->base_addr;
if (el_debug > 2)
printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n", dev->name, ioaddr);
printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n",
dev->name, ioaddr);
netif_stop_queue(dev);
......@@ -822,18 +808,14 @@ static void set_multicast_list(struct net_device *dev)
{
int ioaddr = dev->base_addr;
if(dev->flags&IFF_PROMISC)
{
if (dev->flags & IFF_PROMISC) {
outb(RX_PROM, RX_CMD);
inb(RX_STATUS);
}
else if (dev->mc_list || dev->flags&IFF_ALLMULTI)
{
outb(RX_MULT, RX_CMD); /* Multicast or all multicast is the same */
} else if (dev->mc_list || dev->flags & IFF_ALLMULTI) {
/* Multicast or all multicast is the same */
outb(RX_MULT, RX_CMD);
inb(RX_STATUS); /* Clear status. */
}
else
{
} else {
outb(RX_NORM, RX_CMD);
inb(RX_STATUS);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册