提交 a2d35d0b 编写于 作者: D David S. Miller

Merge branch 'amd-xgbe-fixes'

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver fixes 2017-02-28

This patch series addresses some issues in the AMD XGBE driver.

The following fixes are included in this driver update series:

- Stop the PHY before disabling and releasing device interrupts so that
  MDIO requests issued by the device can be properly handled
- Set the MDIO communication mode on device startup, not just device
  probe
- Do not overwrite SFP settings when mod_absent is detected

This patch series is based on net.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -1323,7 +1323,7 @@ static int xgbe_read_ext_mii_regs(struct xgbe_prv_data *pdata, int addr,
static int xgbe_set_ext_mii_mode(struct xgbe_prv_data *pdata, unsigned int port,
enum xgbe_mdio_mode mode)
{
unsigned int reg_val = 0;
unsigned int reg_val = XGMAC_IOREAD(pdata, MAC_MDIOCL22R);
switch (mode) {
case XGBE_MDIO_MODE_CL22:
......
......@@ -1131,12 +1131,12 @@ static void xgbe_stop(struct xgbe_prv_data *pdata)
hw_if->disable_tx(pdata);
hw_if->disable_rx(pdata);
phy_if->phy_stop(pdata);
xgbe_free_irqs(pdata);
xgbe_napi_disable(pdata, 1);
phy_if->phy_stop(pdata);
hw_if->exit(pdata);
channel = pdata->channel;
......
......@@ -716,6 +716,8 @@ static void xgbe_phy_sfp_phy_settings(struct xgbe_prv_data *pdata)
pdata->phy.duplex = DUPLEX_UNKNOWN;
pdata->phy.autoneg = AUTONEG_ENABLE;
pdata->phy.advertising = pdata->phy.supported;
return;
}
pdata->phy.advertising &= ~ADVERTISED_Autoneg;
......@@ -875,6 +877,16 @@ static int xgbe_phy_find_phy_device(struct xgbe_prv_data *pdata)
!phy_data->sfp_phy_avail)
return 0;
/* Set the proper MDIO mode for the PHY */
ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->mdio_addr,
phy_data->phydev_mode);
if (ret) {
netdev_err(pdata->netdev,
"mdio port/clause not compatible (%u/%u)\n",
phy_data->mdio_addr, phy_data->phydev_mode);
return ret;
}
/* Create and connect to the PHY device */
phydev = get_phy_device(phy_data->mii, phy_data->mdio_addr,
(phy_data->phydev_mode == XGBE_MDIO_MODE_CL45));
......@@ -2722,6 +2734,18 @@ static int xgbe_phy_start(struct xgbe_prv_data *pdata)
if (ret)
return ret;
/* Set the proper MDIO mode for the re-driver */
if (phy_data->redrv && !phy_data->redrv_if) {
ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->redrv_addr,
XGBE_MDIO_MODE_CL22);
if (ret) {
netdev_err(pdata->netdev,
"redriver mdio port not compatible (%u)\n",
phy_data->redrv_addr);
return ret;
}
}
/* Start in highest supported mode */
xgbe_phy_set_mode(pdata, phy_data->start_mode);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册