提交 a23dc694 编写于 作者: S Shawn Guo 提交者: Mark Brown

ASoC: imx: merge sound/soc/imx into sound/soc/fsl

Freescale PowerPC and ARM/IMX families share the same SSI IP block.
The patch merges sound/soc/imx into sound/soc/fsl, so that the possible
code sharing and consolidation can happen.

This is a plain merge, except that menuconfig SND_POWERPC_SOC is added
in Kconfig for PowerPC platform as a correspondence to SND_IMX_SOC for
IMX platform.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 d61e1126
......@@ -100,6 +100,7 @@ CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_SOC=y
CONFIG_SND_POWERPC_SOC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_EXT2_FS=y
......
......@@ -140,6 +140,7 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_PPC is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_POWERPC_SOC=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
......
......@@ -142,6 +142,7 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_PPC is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_POWERPC_SOC=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
......
......@@ -35,7 +35,6 @@ source "sound/soc/blackfin/Kconfig"
source "sound/soc/davinci/Kconfig"
source "sound/soc/ep93xx/Kconfig"
source "sound/soc/fsl/Kconfig"
source "sound/soc/imx/Kconfig"
source "sound/soc/jz4740/Kconfig"
source "sound/soc/nuc900/Kconfig"
source "sound/soc/omap/Kconfig"
......
......@@ -12,7 +12,6 @@ obj-$(CONFIG_SND_SOC) += blackfin/
obj-$(CONFIG_SND_SOC) += davinci/
obj-$(CONFIG_SND_SOC) += ep93xx/
obj-$(CONFIG_SND_SOC) += fsl/
obj-$(CONFIG_SND_SOC) += imx/
obj-$(CONFIG_SND_SOC) += jz4740/
obj-$(CONFIG_SND_SOC) += mid-x86/
obj-$(CONFIG_SND_SOC) += mxs/
......
config SND_SOC_FSL_SSI
tristate
menuconfig SND_POWERPC_SOC
tristate "SoC Audio for Freescale PowerPC CPUs"
depends on FSL_SOC
help
Say Y or M if you want to add support for codecs attached to
the PowerPC CPUs.
if SND_POWERPC_SOC
config SND_MPC52xx_DMA
tristate
......@@ -68,3 +80,83 @@ config SND_MPC52xx_SOC_EFIKA
help
Say Y if you want to add support for sound on the Efika.
endif # SND_POWERPC_SOC
menuconfig SND_IMX_SOC
tristate "SoC Audio for Freescale i.MX CPUs"
depends on ARCH_MXC
help
Say Y or M if you want to add support for codecs attached to
the i.MX CPUs.
if SND_IMX_SOC
config SND_SOC_IMX_SSI
tristate
config SND_SOC_IMX_PCM
tristate
config SND_MXC_SOC_FIQ
tristate
select FIQ
select SND_SOC_IMX_PCM
config SND_MXC_SOC_MX2
tristate
select SND_SOC_DMAENGINE_PCM
select SND_SOC_IMX_PCM
config SND_SOC_IMX_AUDMUX
tristate
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
config SND_SOC_MX27VIS_AIC32X4
tristate "SoC audio support for Visstrim M10 boards"
depends on MACH_IMX27_VISSTRIM_M10 && I2C
select SND_SOC_TLV320AIC32X4
select SND_MXC_SOC_MX2
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Say Y if you want to add support for SoC audio on Visstrim SM10
board with TLV320AIC32X4 codec.
config SND_SOC_PHYCORE_AC97
tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
depends on MACH_PCM043 || MACH_PCA100
select SND_SOC_AC97_BUS
select SND_SOC_WM9712
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
config SND_SOC_EUKREA_TLV320
tristate "Eukrea TLV320"
depends on MACH_EUKREA_MBIMX27_BASEBOARD \
|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
|| MACH_EUKREA_MBIMXSD51_BASEBOARD
depends on I2C
select SND_SOC_TLV320AIC23
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Enable I2S based access to the TLV320AIC23B codec attached
to the SSI interface
endif # SND_IMX_SOC
......@@ -21,3 +21,25 @@ obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o
obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o
obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o
# i.MX Platform Support
snd-soc-imx-ssi-objs := imx-ssi.o
snd-soc-imx-audmux-objs := imx-audmux.o
obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
snd-soc-imx-pcm-y := imx-pcm.o
snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
# i.MX Machine Support
snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
snd-soc-phycore-ac97-objs := phycore-ac97.o
snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
snd-soc-wm1133-ev1-objs := wm1133-ev1.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
......@@ -7,7 +7,7 @@
* which is Copyright 2009 Simtec Electronics
* and on sound/soc/imx/phycore-ac97.c which is
* Copyright 2009 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
......
......@@ -28,7 +28,7 @@
* value. When we read the same register two times (and the register still
* contains the same value) these status bits are not set. We work
* around this by not polling these bits but only wait a fixed delay.
*
*
*/
#include <linux/clk.h>
......
menuconfig SND_IMX_SOC
tristate "SoC Audio for Freescale i.MX CPUs"
depends on ARCH_MXC
help
Say Y or M if you want to add support for codecs attached to
the i.MX SSI interface.
if SND_IMX_SOC
config SND_SOC_IMX_SSI
tristate
config SND_SOC_IMX_PCM
tristate
config SND_MXC_SOC_FIQ
tristate
select FIQ
select SND_SOC_IMX_PCM
config SND_MXC_SOC_MX2
select SND_SOC_DMAENGINE_PCM
tristate
select SND_SOC_IMX_PCM
config SND_SOC_IMX_AUDMUX
tristate
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
config SND_SOC_MX27VIS_AIC32X4
tristate "SoC audio support for Visstrim M10 boards"
depends on MACH_IMX27_VISSTRIM_M10 && I2C
select SND_SOC_TLV320AIC32X4
select SND_MXC_SOC_MX2
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Say Y if you want to add support for SoC audio on Visstrim SM10
board with TLV320AIC32X4 codec.
config SND_SOC_PHYCORE_AC97
tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
depends on MACH_PCM043 || MACH_PCA100
select SND_SOC_AC97_BUS
select SND_SOC_WM9712
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
config SND_SOC_EUKREA_TLV320
tristate "Eukrea TLV320"
depends on MACH_EUKREA_MBIMX27_BASEBOARD \
|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
|| MACH_EUKREA_MBIMXSD51_BASEBOARD
depends on I2C
select SND_SOC_TLV320AIC23
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Enable I2S based access to the TLV320AIC23B codec attached
to the SSI interface
endif # SND_IMX_SOC
# i.MX Platform Support
snd-soc-imx-ssi-objs := imx-ssi.o
snd-soc-imx-audmux-objs := imx-audmux.o
obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
snd-soc-imx-pcm-y := imx-pcm.o
snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
# i.MX Machine Support
snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
snd-soc-phycore-ac97-objs := phycore-ac97.o
snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
snd-soc-wm1133-ev1-objs := wm1133-ev1.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册