spi: Add missing newline to dev_ prints in drivers

Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

drivers/spi/spi-bfin-sport.c

@@ -592,7 +592,7 @@ bfin_sport_spi_setup(struct spi_device *spi)
 			 */
 			if (chip_info->ctl_reg || chip_info->enable_dma) {
 				ret = -EINVAL;
-				dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields");
+				dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields\n");
 				goto error;
 			}
 			chip->cs_chg_udelay = chip_info->cs_chg_udelay;

drivers/spi/spi-bfin5xx.c

@@ -524,7 +524,7 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id)
 	timeout = jiffies + HZ;
 	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
 		if (!time_before(jiffies, timeout)) {
-			dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF");
+			dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF\n");
 			break;
 		} else
 			cpu_relax();
@@ -1052,7 +1052,7 @@ static int bfin_spi_setup(struct spi_device *spi)
 		if (!(spi->mode & SPI_CPHA))
 			dev_warn(&spi->dev, "Warning: SPI CPHA not set:"
 				" Slave Select not under software control!\n"
-				" See Documentation/blackfin/bfin-spi-notes.txt");
+				" See Documentation/blackfin/bfin-spi-notes.txt\n");
 
 		chip->flag = (1 << spi->chip_select) << 8;
 	} else

drivers/spi/spi-ep93xx.c

@@ -330,7 +330,7 @@ static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
 
 	dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
 		chip->spi->mode, div_cpsr, div_scr, dss);
-	dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0);
+	dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);
 
 	ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
 	ep93xx_spi_write_u16(espi, SSPCR0, cr0);
@@ -509,7 +509,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
 	}
 
 	if (WARN_ON(len)) {
-		dev_warn(&espi->pdev->dev, "len = %zu expected 0!", len);
+		dev_warn(&espi->pdev->dev, "len = %zu expected 0!\n", len);
 		return ERR_PTR(-EINVAL);
 	}
 

drivers/spi/spi-fsl-cpm.c

@@ -299,7 +299,7 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)
 
 		switch (mspi->subblock) {
 		default:
-			dev_warn(dev, "cell-index unspecified, assuming SPI1");
+			dev_warn(dev, "cell-index unspecified, assuming SPI1\n");
 			/* fall through */
 		case 0:
 			mspi->subblock = QE_CR_SUBBLOCK_SPI1;

drivers/spi/spi-omap2-mcspi.c

@@ -498,7 +498,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
 				((u32 *)xfer->rx_buf)[elements++] = w;
 		} else {
 			int bytes_per_word = mcspi_bytes_per_word(word_len);
-			dev_err(&spi->dev, "DMA RX penultimate word empty");
+			dev_err(&spi->dev, "DMA RX penultimate word empty\n");
 			count -= (bytes_per_word << 1);
 			omap2_mcspi_set_enable(spi, 1);
 			return count;
@@ -516,7 +516,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
 		else /* word_len <= 32 */
 			((u32 *)xfer->rx_buf)[elements] = w;
 	} else {
-		dev_err(&spi->dev, "DMA RX last word empty");
+		dev_err(&spi->dev, "DMA RX last word empty\n");
 		count -= mcspi_bytes_per_word(word_len);
 	}
 	omap2_mcspi_set_enable(spi, 1);