提交 a00fb669 编写于 作者: Y Yoichi Yuasa 提交者: Ralf Baechle

[MIPS] txx9_cpu_clock setup move to rbtx4927_time_init()

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 7a1fdf19
......@@ -252,55 +252,6 @@ static void __init rbtx4927_mem_setup(void)
set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
#endif
/*
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
*
* For TX4927:
* PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
* CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
* CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
* CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
* CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
* i.e. S9[3]: ON (83MHz), OFF (100MHz)
*
* For TX4937:
* PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
* PCIDIVMODE[10] is 0.
* CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
* CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
* CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
* CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
* CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
* CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
*
*/
if (mips_machtype == MACH_TOSHIBA_RBTX4937)
switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
TX4938_CCFG_PCIDIVMODE_MASK) {
case TX4938_CCFG_PCIDIVMODE_8:
case TX4938_CCFG_PCIDIVMODE_4:
txx9_cpu_clock = 266666666; /* 266MHz */
break;
case TX4938_CCFG_PCIDIVMODE_9:
case TX4938_CCFG_PCIDIVMODE_4_5:
txx9_cpu_clock = 300000000; /* 300MHz */
break;
default:
txx9_cpu_clock = 333333333; /* 333MHz */
}
else
switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
case TX4927_CCFG_PCIDIVMODE_5:
txx9_cpu_clock = 166666666; /* 166MHz */
break;
default:
txx9_cpu_clock = 200000000; /* 200MHz */
}
/* change default value to udelay/mdelay take reasonable time */
loops_per_jiffy = txx9_cpu_clock / HZ / 2;
/* CCFG */
/* do reset on watchdog */
tx4927_ccfg_set(TX4927_CCFG_WR);
......@@ -349,6 +300,55 @@ static void __init rbtx4927_mem_setup(void)
static void __init rbtx4927_time_init(void)
{
/*
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
*
* For TX4927:
* PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
* CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
* CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
* CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
* CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
* i.e. S9[3]: ON (83MHz), OFF (100MHz)
*
* For TX4937:
* PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
* PCIDIVMODE[10] is 0.
* CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
* CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
* CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
* CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
* CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
* CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
*/
if (mips_machtype == MACH_TOSHIBA_RBTX4937)
switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
TX4938_CCFG_PCIDIVMODE_MASK) {
case TX4938_CCFG_PCIDIVMODE_8:
case TX4938_CCFG_PCIDIVMODE_4:
txx9_cpu_clock = 266666666; /* 266MHz */
break;
case TX4938_CCFG_PCIDIVMODE_9:
case TX4938_CCFG_PCIDIVMODE_4_5:
txx9_cpu_clock = 300000000; /* 300MHz */
break;
default:
txx9_cpu_clock = 333333333; /* 333MHz */
}
else
switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
case TX4927_CCFG_PCIDIVMODE_5:
txx9_cpu_clock = 166666666; /* 166MHz */
break;
default:
txx9_cpu_clock = 200000000; /* 200MHz */
}
/* change default value to udelay/mdelay take reasonable time */
loops_per_jiffy = txx9_cpu_clock / HZ / 2;
mips_hpt_frequency = txx9_cpu_clock / 2;
if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册