提交 a00828e9 编写于 作者: P Pete Zaitcev 提交者: Greg Kroah-Hartman

[PATCH] USB: drivers/usb/storage/libusual

This patch adds a shim driver libusual, which routes devices between
usb-storage and ub according to the common table, based on unusual_devs.h.
The help and example syntax is in Kconfig.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 1c50c317
......@@ -358,7 +358,8 @@ config BLK_DEV_UB
This driver supports certain USB attached storage devices
such as flash keys.
Warning: Enabling this cripples the usb-storage driver.
If you enable this driver, it is recommended to avoid conflicts
with usb-storage by enabling USB_LIBUSUAL.
If unsure, say N.
......
......@@ -29,6 +29,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb_usual.h>
#include <linux/blkdev.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/timer.h>
......@@ -106,16 +107,6 @@
* +--------+
*/
/*
* Definitions which have to be scattered once we understand the layout better.
*/
/* Transport (despite PR in the name) */
#define US_PR_BULK 0x50 /* bulk only */
/* Protocol */
#define US_SC_SCSI 0x06 /* Transparent */
/*
* This many LUNs per USB device.
* Every one of them takes a host, see UB_MAX_HOSTS.
......@@ -422,13 +413,18 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum);
/*
*/
#ifdef CONFIG_USB_LIBUSUAL
#define ub_usb_ids storage_usb_ids
#else
static struct usb_device_id ub_usb_ids[] = {
// { USB_DEVICE_VER(0x0781, 0x0002, 0x0009, 0x0009) }, /* SDDR-31 */
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
{ }
};
MODULE_DEVICE_TABLE(usb, ub_usb_ids);
#endif /* CONFIG_USB_LIBUSUAL */
/*
* Find me a way to identify "next free minor" for add_disk(),
......@@ -2172,6 +2168,9 @@ static int ub_probe(struct usb_interface *intf,
int rc;
int i;
if (usb_usual_check_type(dev_id, USB_US_TYPE_UB))
return -ENXIO;
rc = -ENOMEM;
if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
goto err_core;
......@@ -2479,6 +2478,7 @@ static int __init ub_init(void)
if ((rc = usb_register(&ub_driver)) != 0)
goto err_register;
usb_usual_set_present(USB_US_TYPE_UB);
return 0;
err_register:
......@@ -2494,6 +2494,7 @@ static void __exit ub_exit(void)
devfs_remove(DEVFS_NAME);
unregister_blkdev(UB_MAJOR, DRV_NAME);
usb_usual_clear_present(USB_US_TYPE_UB);
}
module_init(ub_init);
......
......@@ -22,6 +22,7 @@ obj-$(CONFIG_USB_MIDI) += class/
obj-$(CONFIG_USB_PRINTER) += class/
obj-$(CONFIG_USB_STORAGE) += storage/
obj-$(CONFIG_USB) += storage/
obj-$(CONFIG_USB_AIPTEK) += input/
obj-$(CONFIG_USB_ATI_REMOTE) += input/
......
......@@ -124,3 +124,17 @@ config USB_STORAGE_ONETOUCH
hard drive's as an input device. An action can be associated with
this input in any keybinding software. (e.g. gnome's keyboard short-
cuts)
config USB_LIBUSUAL
bool "The shared table of common (or usual) storage devices"
depends on USB
help
This module contains a table of common (or usual) devices
for usb-storage and ub drivers, and allows to switch binding
of these devices without rebuilding modules.
Typical syntax of /etc/modprobe.conf is:
options libusual bias="ub"
If unsure, say N.
......@@ -22,3 +22,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
ifneq ($(CONFIG_USB_LIBUSUAL),)
obj-$(CONFIG_USB) += libusual.o
endif
/*
* libusual
*
* The libusual contains the table of devices common for ub and usb-storage.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb_usual.h>
#include <linux/vmalloc.h>
/*
*/
#define USU_MOD_FL_THREAD 1 /* Thread is running */
#define USU_MOD_FL_PRESENT 2 /* The module is loaded */
struct mod_status {
unsigned long fls;
};
static struct mod_status stat[3];
static DEFINE_SPINLOCK(usu_lock);
/*
*/
#define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR
#define BIAS_NAME_SIZE (sizeof("usb-storage"))
static char bias[BIAS_NAME_SIZE];
static int usb_usual_bias;
static const char *bias_names[3] = { "none", "usb-storage", "ub" };
static DECLARE_MUTEX_LOCKED(usu_init_notify);
static DECLARE_COMPLETION(usu_end_notify);
static atomic_t total_threads = ATOMIC_INIT(0);
static int usu_probe_thread(void *arg);
static int parse_bias(const char *bias_s);
/*
* The table.
*/
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
vendorName, productName,useProtocol, useTransport, \
initFunction, flags) \
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
#define USUAL_DEV(useProto, useTrans, useType) \
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
.driver_info = ((useType)<<24) }
struct usb_device_id storage_usb_ids [] = {
# include "unusual_devs.h"
{ } /* Terminating entry */
};
#undef USUAL_DEV
#undef UNUSUAL_DEV
MODULE_DEVICE_TABLE(usb, storage_usb_ids);
EXPORT_SYMBOL_GPL(storage_usb_ids);
/*
* @type: the module type as an integer
*/
void usb_usual_set_present(int type)
{
struct mod_status *st;
unsigned long flags;
if (type <= 0 || type >= 3)
return;
st = &stat[type];
spin_lock_irqsave(&usu_lock, flags);
st->fls |= USU_MOD_FL_PRESENT;
spin_unlock_irqrestore(&usu_lock, flags);
}
EXPORT_SYMBOL_GPL(usb_usual_set_present);
void usb_usual_clear_present(int type)
{
struct mod_status *st;
unsigned long flags;
if (type <= 0 || type >= 3)
return;
st = &stat[type];
spin_lock_irqsave(&usu_lock, flags);
st->fls &= ~USU_MOD_FL_PRESENT;
spin_unlock_irqrestore(&usu_lock, flags);
}
EXPORT_SYMBOL_GPL(usb_usual_clear_present);
/*
* Match the calling driver type against the table.
* Returns: 0 if the device matches.
*/
int usb_usual_check_type(const struct usb_device_id *id, int caller_type)
{
int id_type = USB_US_TYPE(id->driver_info);
if (caller_type <= 0 || caller_type >= 3)
return -EINVAL;
/* Drivers grab fixed assignment devices */
if (id_type == caller_type)
return 0;
/* Drivers grab devices biased to them */
if (id_type == USB_US_TYPE_NONE && caller_type == usb_usual_bias)
return 0;
return -ENODEV;
}
EXPORT_SYMBOL_GPL(usb_usual_check_type);
/*
*/
static int usu_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int type;
int rc;
unsigned long flags;
type = USB_US_TYPE(id->driver_info);
if (type == 0)
type = usb_usual_bias;
spin_lock_irqsave(&usu_lock, flags);
if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) {
spin_unlock_irqrestore(&usu_lock, flags);
return -ENXIO;
}
stat[type].fls |= USU_MOD_FL_THREAD;
spin_unlock_irqrestore(&usu_lock, flags);
rc = kernel_thread(usu_probe_thread, (void*)type, CLONE_VM);
if (rc < 0) {
printk(KERN_WARNING "libusual: "
"Unable to start the thread for %s: %d\n",
bias_names[type], rc);
spin_lock_irqsave(&usu_lock, flags);
stat[type].fls &= ~USU_MOD_FL_THREAD;
spin_unlock_irqrestore(&usu_lock, flags);
return rc; /* Not being -ENXIO causes a message printed */
}
atomic_inc(&total_threads);
return -ENXIO;
}
static void usu_disconnect(struct usb_interface *intf)
{
; /* We should not be here. */
}
static struct usb_driver usu_driver = {
.owner = THIS_MODULE,
.name = "libusual",
.probe = usu_probe,
.disconnect = usu_disconnect,
.id_table = storage_usb_ids,
};
/*
* A whole new thread for a purpose of request_module seems quite stupid.
* The request_module forks once inside again. However, if we attempt
* to load a storage module from our own modprobe thread, that module
* references our symbols, which cannot be resolved until our module is
* initialized. I wish there was a way to wait for the end of initialization.
* The module notifier reports MODULE_STATE_COMING only.
* So, we wait until module->init ends as the next best thing.
*/
static int usu_probe_thread(void *arg)
{
int type = (unsigned long) arg;
struct mod_status *st = &stat[type];
int rc;
unsigned long flags;
daemonize("libusual_%d", type); /* "usb-storage" is kinda too long */
/* A completion does not work here because it's counted. */
down(&usu_init_notify);
up(&usu_init_notify);
rc = request_module(bias_names[type]);
spin_lock_irqsave(&usu_lock, flags);
if (rc == 0 && (st->fls & USU_MOD_FL_PRESENT) == 0) {
/*
* This should not happen, but let us keep tabs on it.
*/
printk(KERN_NOTICE "libusual: "
"modprobe for %s succeeded, but module is not present\n",
bias_names[type]);
}
st->fls &= ~USU_MOD_FL_THREAD;
spin_unlock_irqrestore(&usu_lock, flags);
complete_and_exit(&usu_end_notify, 0);
}
/*
*/
static int __init usb_usual_init(void)
{
int rc;
bias[BIAS_NAME_SIZE-1] = 0;
usb_usual_bias = parse_bias(bias);
rc = usb_register(&usu_driver);
up(&usu_init_notify);
return rc;
}
static void __exit usb_usual_exit(void)
{
/*
* We do not check for any drivers present, because
* they keep us pinned with symbol references.
*/
usb_deregister(&usu_driver);
while (atomic_read(&total_threads) > 0) {
wait_for_completion(&usu_end_notify);
atomic_dec(&total_threads);
}
}
/*
* Validate and accept the bias parameter.
* Maybe make an sysfs method later. XXX
*/
static int parse_bias(const char *bias_s)
{
int i;
int bias_n = 0;
if (bias_s[0] == 0 || bias_s[0] == ' ') {
bias_n = USB_US_DEFAULT_BIAS;
} else {
for (i = 1; i < 3; i++) {
if (strcmp(bias_s, bias_names[i]) == 0) {
bias_n = i;
break;
}
}
if (bias_n == 0) {
bias_n = USB_US_DEFAULT_BIAS;
printk(KERN_INFO
"libusual: unknown bias \"%s\", using \"%s\"\n",
bias_s, bias_names[bias_n]);
}
}
return bias_n;
}
module_init(usb_usual_init);
module_exit(usb_usual_exit);
module_param_string(bias, bias, BIAS_NAME_SIZE, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(bias, "Bias to usb-storage or ub");
MODULE_LICENSE("GPL");
......@@ -41,20 +41,6 @@
#ifndef _PROTOCOL_H_
#define _PROTOCOL_H_
/* Sub Classes */
#define US_SC_RBC 0x01 /* Typically, flash devices */
#define US_SC_8020 0x02 /* CD-ROM */
#define US_SC_QIC 0x03 /* QIC-157 Tapes */
#define US_SC_UFI 0x04 /* Floppy */
#define US_SC_8070 0x05 /* Removable media */
#define US_SC_SCSI 0x06 /* Transparent */
#define US_SC_ISD200 0x07 /* ISD200 ATA */
#define US_SC_MIN US_SC_RBC
#define US_SC_MAX US_SC_ISD200
#define US_SC_DEVICE 0xff /* Use device's value */
/* Protocol handling routines */
extern void usb_stor_ATAPI_command(struct scsi_cmnd*, struct us_data*);
extern void usb_stor_qic157_command(struct scsi_cmnd*, struct us_data*);
......
......@@ -41,39 +41,8 @@
#ifndef _TRANSPORT_H_
#define _TRANSPORT_H_
#include <linux/config.h>
#include <linux/blkdev.h>
/* Protocols */
#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
#define US_PR_BULK 0x50 /* bulk only */
#ifdef CONFIG_USB_STORAGE_USBAT
#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR09
#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
#endif
#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
#ifdef CONFIG_USB_STORAGE_FREECOM
#define US_PR_FREECOM 0xf1 /* Freecom */
#endif
#ifdef CONFIG_USB_STORAGE_DATAFAB
#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
#endif
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
#endif
#define US_PR_DEVICE 0xff /* Use device's value */
/*
* Bulk only data structures
*/
......
......@@ -1134,3 +1134,27 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
US_SC_SCSI, US_PR_SDDR55, NULL,
US_FL_SINGLE_LUN),
#endif
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
/* Control/Bulk/Interrupt transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
/* Bulk-only transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),
......@@ -112,49 +112,33 @@ static atomic_t total_threads = ATOMIC_INIT(0);
static DECLARE_COMPLETION(threads_gone);
/* The entries in this table, except for final ones here
* (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
* line for line with the entries of us_unsuaul_dev_list[].
/*
* The entries in this table correspond, line for line,
* with the entries of us_unusual_dev_list[].
*/
#ifndef CONFIG_USB_LIBUSUAL
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
vendorName, productName,useProtocol, useTransport, \
initFunction, flags) \
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) }
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
#define USUAL_DEV(useProto, useTrans, useType) \
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
.driver_info = (USB_US_TYPE_STOR<<24) }
static struct usb_device_id storage_usb_ids [] = {
# include "unusual_devs.h"
#undef UNUSUAL_DEV
/* Control/Bulk transport for all SubClass values */
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) },
/* Control/Bulk/Interrupt transport for all SubClass values */
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) },
/* Bulk-only transport for all SubClass values */
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
#undef USUAL_DEV
/* Terminating entry */
{ }
};
MODULE_DEVICE_TABLE (usb, storage_usb_ids);
#endif /* CONFIG_USB_LIBUSUAL */
/* This is the list of devices we recognize, along with their flag data */
......@@ -167,7 +151,6 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
* are free to use as many characters as you like.
*/
#undef UNUSUAL_DEV
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
vendor_name, product_name, use_protocol, use_transport, \
init_function, Flags) \
......@@ -177,53 +160,18 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
.useProtocol = use_protocol, \
.useTransport = use_transport, \
.initFunction = init_function, \
.flags = Flags, \
}
#define USUAL_DEV(use_protocol, use_transport, use_type) \
{ \
.useProtocol = use_protocol, \
.useTransport = use_transport, \
}
static struct us_unusual_dev us_unusual_dev_list[] = {
# include "unusual_devs.h"
# undef UNUSUAL_DEV
/* Control/Bulk transport for all SubClass values */
{ .useProtocol = US_SC_RBC,
.useTransport = US_PR_CB},
{ .useProtocol = US_SC_8020,
.useTransport = US_PR_CB},
{ .useProtocol = US_SC_QIC,
.useTransport = US_PR_CB},
{ .useProtocol = US_SC_UFI,
.useTransport = US_PR_CB},
{ .useProtocol = US_SC_8070,
.useTransport = US_PR_CB},
{ .useProtocol = US_SC_SCSI,
.useTransport = US_PR_CB},
/* Control/Bulk/Interrupt transport for all SubClass values */
{ .useProtocol = US_SC_RBC,
.useTransport = US_PR_CBI},
{ .useProtocol = US_SC_8020,
.useTransport = US_PR_CBI},
{ .useProtocol = US_SC_QIC,
.useTransport = US_PR_CBI},
{ .useProtocol = US_SC_UFI,
.useTransport = US_PR_CBI},
{ .useProtocol = US_SC_8070,
.useTransport = US_PR_CBI},
{ .useProtocol = US_SC_SCSI,
.useTransport = US_PR_CBI},
/* Bulk-only transport for all SubClass values */
{ .useProtocol = US_SC_RBC,
.useTransport = US_PR_BULK},
{ .useProtocol = US_SC_8020,
.useTransport = US_PR_BULK},
{ .useProtocol = US_SC_QIC,
.useTransport = US_PR_BULK},
{ .useProtocol = US_SC_UFI,
.useTransport = US_PR_BULK},
{ .useProtocol = US_SC_8070,
.useTransport = US_PR_BULK},
{ .useProtocol = US_SC_SCSI,
.useTransport = US_PR_BULK},
# undef USUAL_DEV
/* Terminating entry */
{ NULL }
......@@ -484,14 +432,20 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf)
return 0;
}
/* Find an unusual_dev descriptor (always succeeds in the current code) */
static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
{
const int id_index = id - storage_usb_ids;
return &us_unusual_dev_list[id_index];
}
/* Get the unusual_devs entries and the string descriptors */
static void get_device_info(struct us_data *us, int id_index)
static void get_device_info(struct us_data *us, const struct usb_device_id *id)
{
struct usb_device *dev = us->pusb_dev;
struct usb_interface_descriptor *idesc =
&us->pusb_intf->cur_altsetting->desc;
struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index];
struct usb_device_id *id = &storage_usb_ids[id_index];
struct us_unusual_dev *unusual_dev = find_unusual(id);
/* Store the entries */
us->unusual_dev = unusual_dev;
......@@ -501,7 +455,7 @@ static void get_device_info(struct us_data *us, int id_index)
us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
idesc->bInterfaceProtocol :
unusual_dev->useTransport;
us->flags = unusual_dev->flags;
us->flags = USB_US_ORIG_FLAGS(id->driver_info);
/*
* This flag is only needed when we're in high-speed, so let's
......@@ -529,7 +483,7 @@ static void get_device_info(struct us_data *us, int id_index)
if (unusual_dev->useTransport != US_PR_DEVICE &&
us->protocol == idesc->bInterfaceProtocol)
msg += 2;
if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE))
if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
printk(KERN_NOTICE USB_STORAGE "This device "
"(%04x,%04x,%04x S %02x P %02x)"
" has %s in unusual_devs.h\n"
......@@ -921,10 +875,12 @@ static int storage_probe(struct usb_interface *intf,
{
struct Scsi_Host *host;
struct us_data *us;
const int id_index = id - storage_usb_ids;
int result;
struct task_struct *th;
if (usb_usual_check_type(id, USB_US_TYPE_STOR))
return -ENXIO;
US_DEBUGP("USB Mass Storage device detected\n");
/*
......@@ -957,7 +913,7 @@ static int storage_probe(struct usb_interface *intf,
* of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table.
*/
get_device_info(us, id_index);
get_device_info(us, id);
#ifdef CONFIG_USB_STORAGE_SDDR09
if (us->protocol == US_PR_EUSB_SDDR09 ||
......@@ -1062,9 +1018,10 @@ static int __init usb_stor_init(void)
/* register the driver, return usb_register return code if error */
retval = usb_register(&usb_storage_driver);
if (retval == 0)
if (retval == 0) {
printk(KERN_INFO "USB Mass Storage support registered.\n");
usb_usual_set_present(USB_US_TYPE_STOR);
}
return retval;
}
......@@ -1088,6 +1045,8 @@ static void __exit usb_stor_exit(void)
wait_for_completion(&threads_gone);
atomic_dec(&total_threads);
}
usb_usual_clear_present(USB_US_TYPE_STOR);
}
module_init(usb_stor_init);
......
......@@ -45,6 +45,7 @@
#define _USB_H_
#include <linux/usb.h>
#include <linux/usb_usual.h>
#include <linux/blkdev.h>
#include <linux/smp_lock.h>
#include <linux/completion.h>
......@@ -63,38 +64,8 @@ struct us_unusual_dev {
__u8 useProtocol;
__u8 useTransport;
int (*initFunction)(struct us_data *);
unsigned int flags;
};
/*
* Static flag definitions. We use this roundabout technique so that the
* proc_info() routine can automatically display a message for each flag.
*/
#define US_DO_ALL_FLAGS \
US_FLAG(SINGLE_LUN, 0x00000001) \
/* allow access to only LUN 0 */ \
US_FLAG(NEED_OVERRIDE, 0x00000002) \
/* unusual_devs entry is necessary */ \
US_FLAG(SCM_MULT_TARG, 0x00000004) \
/* supports multiple targets */ \
US_FLAG(FIX_INQUIRY, 0x00000008) \
/* INQUIRY response needs faking */ \
US_FLAG(FIX_CAPACITY, 0x00000010) \
/* READ CAPACITY response too big */ \
US_FLAG(IGNORE_RESIDUE, 0x00000020) \
/* reported residue is wrong */ \
US_FLAG(BULK32, 0x00000040) \
/* Uses 32-byte CBW length */ \
US_FLAG(NOT_LOCKABLE, 0x00000080) \
/* PREVENT/ALLOW not supported */ \
US_FLAG(GO_SLOW, 0x00000100) \
/* Need delay after Command phase */ \
US_FLAG(NO_WP_DETECT, 0x00000200) \
/* Don't check for write-protect */ \
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
#undef US_FLAG
/* Dynamic flag definitions: used in set_bit() etc. */
#define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */
......
/*
* Interface to the libusual.
*
* Copyright (c) 2005 Pete Zaitcev <zaitcev@redhat.com>
* Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
* Copyright (c) 1999 Michael Gee (michael@linuxspecific.com)
*/
#ifndef __LINUX_USB_USUAL_H
#define __LINUX_USB_USUAL_H
#include <linux/config.h>
/* We should do this for cleanliness... But other usb_foo.h do not do this. */
/* #include <linux/usb.h> */
/*
* The flags field, which we store in usb_device_id.driver_info.
* It is compatible with the old usb-storage flags in lower 24 bits.
*/
/*
* Static flag definitions. We use this roundabout technique so that the
* proc_info() routine can automatically display a message for each flag.
*/
#define US_DO_ALL_FLAGS \
US_FLAG(SINGLE_LUN, 0x00000001) \
/* allow access to only LUN 0 */ \
US_FLAG(NEED_OVERRIDE, 0x00000002) \
/* unusual_devs entry is necessary */ \
US_FLAG(SCM_MULT_TARG, 0x00000004) \
/* supports multiple targets */ \
US_FLAG(FIX_INQUIRY, 0x00000008) \
/* INQUIRY response needs faking */ \
US_FLAG(FIX_CAPACITY, 0x00000010) \
/* READ CAPACITY response too big */ \
US_FLAG(IGNORE_RESIDUE, 0x00000020) \
/* reported residue is wrong */ \
US_FLAG(BULK32, 0x00000040) \
/* Uses 32-byte CBW length */ \
US_FLAG(NOT_LOCKABLE, 0x00000080) \
/* PREVENT/ALLOW not supported */ \
US_FLAG(GO_SLOW, 0x00000100) \
/* Need delay after Command phase */ \
US_FLAG(NO_WP_DETECT, 0x00000200) \
/* Don't check for write-protect */ \
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
#undef US_FLAG
/*
* The bias field for libusual and friends.
*/
#define USB_US_TYPE_NONE 0
#define USB_US_TYPE_STOR 1 /* usb-storage */
#define USB_US_TYPE_UB 2 /* ub */
#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF)
#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF)
/*
* This is probably not the best place to keep these constants, conceptually.
* But it's the only header included into all places which need them.
*/
/* Sub Classes */
#define US_SC_RBC 0x01 /* Typically, flash devices */
#define US_SC_8020 0x02 /* CD-ROM */
#define US_SC_QIC 0x03 /* QIC-157 Tapes */
#define US_SC_UFI 0x04 /* Floppy */
#define US_SC_8070 0x05 /* Removable media */
#define US_SC_SCSI 0x06 /* Transparent */
#define US_SC_ISD200 0x07 /* ISD200 ATA */
#define US_SC_MIN US_SC_RBC
#define US_SC_MAX US_SC_ISD200
#define US_SC_DEVICE 0xff /* Use device's value */
/* Protocols */
#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
#define US_PR_BULK 0x50 /* bulk only */
#ifdef CONFIG_USB_STORAGE_USBAT
#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR09
#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
#endif
#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
#ifdef CONFIG_USB_STORAGE_FREECOM
#define US_PR_FREECOM 0xf1 /* Freecom */
#endif
#ifdef CONFIG_USB_STORAGE_DATAFAB
#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
#endif
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
#endif
#define US_PR_DEVICE 0xff /* Use device's value */
/*
*/
#ifdef CONFIG_USB_LIBUSUAL
extern struct usb_device_id storage_usb_ids[];
extern void usb_usual_set_present(int type);
extern void usb_usual_clear_present(int type);
extern int usb_usual_check_type(const struct usb_device_id *, int type);
#else
#define usb_usual_set_present(t) do { } while(0)
#define usb_usual_clear_present(t) do { } while(0)
#define usb_usual_check_type(id, t) (0)
#endif /* CONFIG_USB_LIBUSUAL */
#endif /* __LINUX_USB_USUAL_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册