提交 9f9b2792 编写于 作者: L Lionel Landwerlin

drm/i915/perf: reuse timestamp frequency from device info

Now that we have this stored in the device info, we can drop it from perf
part of the driver.

Note that this requires to init perf after we've computed the frequency,
hence why we move i915_perf_init() from i915_driver_init_early() to after
intel_device_info_runtime_init().

v2: Use div_u64 (Chris)

v3: Drop u64 divs by switching to kHz (Chris/Ville)
    Move i915_perf_fini to i915_driver_cleanup_hw (Matthew)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113181902.12411-2-lionel.g.landwerlin@intel.com
上级 3fef5cda
......@@ -936,8 +936,6 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
intel_detect_preproduction_hw(dev_priv);
i915_perf_init(dev_priv);
return 0;
err_irq:
......@@ -954,7 +952,6 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
*/
static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv)
{
i915_perf_fini(dev_priv);
i915_gem_load_cleanup(dev_priv);
intel_irq_fini(dev_priv);
i915_workqueues_cleanup(dev_priv);
......@@ -1101,6 +1098,8 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
intel_sanitize_options(dev_priv);
i915_perf_init(dev_priv);
ret = i915_ggtt_probe_hw(dev_priv);
if (ret)
return ret;
......@@ -1206,6 +1205,8 @@ static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
{
struct pci_dev *pdev = dev_priv->drm.pdev;
i915_perf_fini(dev_priv);
if (pdev->msi_enabled)
pci_disable_msi(pdev);
......
......@@ -2619,7 +2619,6 @@ struct drm_i915_private {
bool periodic;
int period_exponent;
int timestamp_frequency;
struct i915_oa_config test_config;
......
......@@ -2690,8 +2690,8 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv,
static u64 oa_exponent_to_ns(struct drm_i915_private *dev_priv, int exponent)
{
return div_u64(1000000000ULL * (2ULL << exponent),
dev_priv->perf.oa.timestamp_frequency);
return div64_u64(1000000000ULL * (2ULL << exponent),
1000ULL * INTEL_INFO(dev_priv)->cs_timestamp_frequency_khz);
}
/**
......@@ -3423,8 +3423,6 @@ static struct ctl_table dev_root[] = {
*/
void i915_perf_init(struct drm_i915_private *dev_priv)
{
dev_priv->perf.oa.timestamp_frequency = 0;
if (IS_HASWELL(dev_priv)) {
dev_priv->perf.oa.ops.is_valid_b_counter_reg =
gen7_is_valid_b_counter_addr;
......@@ -3440,8 +3438,6 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
dev_priv->perf.oa.ops.oa_hw_tail_read =
gen7_oa_hw_tail_read;
dev_priv->perf.oa.timestamp_frequency = 12500000;
dev_priv->perf.oa.oa_formats = hsw_oa_formats;
} else if (i915_modparams.enable_execlists) {
/* Note: that although we could theoretically also support the
......@@ -3485,23 +3481,6 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16);
}
switch (dev_priv->info.platform) {
case INTEL_BROADWELL:
dev_priv->perf.oa.timestamp_frequency = 12500000;
break;
case INTEL_BROXTON:
case INTEL_GEMINILAKE:
dev_priv->perf.oa.timestamp_frequency = 19200000;
break;
case INTEL_SKYLAKE:
case INTEL_KABYLAKE:
case INTEL_COFFEELAKE:
dev_priv->perf.oa.timestamp_frequency = 12000000;
break;
default:
break;
}
} else if (IS_GEN10(dev_priv)) {
dev_priv->perf.oa.ops.is_valid_b_counter_reg =
gen7_is_valid_b_counter_addr;
......@@ -3517,15 +3496,10 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
dev_priv->perf.oa.ctx_flexeu0_offset = 0x3de;
dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16);
/* Default frequency, although we need to read it from
* the register as it might vary between parts.
*/
dev_priv->perf.oa.timestamp_frequency = 12000000;
}
}
if (dev_priv->perf.oa.timestamp_frequency) {
if (dev_priv->perf.oa.ops.enable_metric_set) {
hrtimer_init(&dev_priv->perf.oa.poll_check_timer,
CLOCK_MONOTONIC, HRTIMER_MODE_REL);
dev_priv->perf.oa.poll_check_timer.function = oa_poll_check_timer_cb;
......@@ -3535,8 +3509,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
mutex_init(&dev_priv->perf.lock);
spin_lock_init(&dev_priv->perf.oa.oa_buffer.ptr_lock);
oa_sample_rate_hard_limit =
dev_priv->perf.oa.timestamp_frequency / 2;
oa_sample_rate_hard_limit = 1000 *
(INTEL_INFO(dev_priv)->cs_timestamp_frequency_khz / 2);
dev_priv->perf.sysctl_header = register_sysctl_table(dev_root);
mutex_init(&dev_priv->perf.metrics_lock);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册