arm64: dts: qcom: Add 8x16 Serial UART1 node

This patch adds the nodes required to support the UART1 node on the
MSM8916 and also fixes the sleep pins function for UART2.
Signed-off-by: NAndy Gross <agross@codeaurora.org>

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -19,6 +19,7 @@
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
+		serial1 = &blsp1_uart1;
 	};
 
 	chosen {

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

@@ -13,6 +13,30 @@
 
 &msmgpio {
 
+	blsp1_uart1_default: blsp1_uart1_default {
+		pinmux {
+			function = "blsp_uart1";
+			pins = "gpio0", "gpio1";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart1_sleep: blsp1_uart1_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio0", "gpio1";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
 	blsp1_uart2_default: blsp1_uart2_default {
 		pinmux {
 			function = "blsp_uart2";
@@ -27,7 +51,7 @@
 
 	blsp1_uart2_sleep: blsp1_uart2_sleep {
 		pinmux {
-			function = "blsp_uart2";
+			function = "gpio";
 			pins = "gpio4", "gpio5";
 		};
 		pinconf {

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -102,6 +102,15 @@
 			reg = <0x1800000 0x80000>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart2: serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78b0000 0x200>;