Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 9e9f8733 编写于 作者: B Bob Moore 提交者： Rafael J. Wysocki
浏览文件
操作

ACPICA: Split large interpreter file 

New file: exserial.c
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
上级 e324e101
隐藏空白更改
内联 并排
Showing with 381 addition and 364 deletion
drivers/acpi/acpica/Makefile
浏览文件 @ 9e9f8733
......@@ -65,6 +65,7 @@ acpi-y += \
exresnte.o \
exresolv.o \
exresop.o \
exserial.o \
exstore.o \
exstoren.o \
exstorob.o \
......
drivers/acpi/acpica/acinterp.h
浏览文件 @ 9e9f8733
......@@ -270,6 +270,26 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info);
/*
* exserial - field_unit support for serial address spaces
*/
acpi_status
acpi_ex_read_serial_bus(union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer);
acpi_status
acpi_ex_write_serial_bus(union acpi_operand_object *source_desc,
union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer);
acpi_status
acpi_ex_read_gpio(union acpi_operand_object *obj_desc, void *buffer);
acpi_status
acpi_ex_write_gpio(union acpi_operand_object *source_desc,
union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer);
/*
* exsystem - Interface to OS services
*/
......
drivers/acpi/acpica/exfield.c
浏览文件 @ 9e9f8733
......@@ -16,31 +16,12 @@
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exfield")
/* Local prototypes */
static acpi_status
acpi_ex_read_serial_bus(union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer);
static acpi_status
acpi_ex_write_serial_bus(union acpi_operand_object *source_desc,
union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer);
static acpi_status
acpi_ex_read_gpio(union acpi_operand_object *obj_desc, void *buffer);
static acpi_status
acpi_ex_write_gpio(union acpi_operand_object *source_desc,
union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer);
/*
* This table maps the various Attrib protocols to the byte transfer
* length. Used for the generic serial bus.
*/
#define ACPI_INVALID_PROTOCOL_ID 0x80
#define ACPI_MAX_PROTOCOL_ID 0x0F
const u8 acpi_protocol_lengths[] = {
ACPI_INVALID_PROTOCOL_ID, /* 0 - reserved */
ACPI_INVALID_PROTOCOL_ID, /* 1 - reserved */
......@@ -343,348 +324,3 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_read_gpio
*
* PARAMETERS: obj_desc - The named field to read
* buffer - Where the return data is returnd
*
* RETURN: Status
*
* DESCRIPTION: Read from a named field that references a Generic Serial Bus
* field
*
******************************************************************************/
static acpi_status
acpi_ex_read_gpio(union acpi_operand_object *obj_desc, void *buffer)
{
acpi_status status;
ACPI_FUNCTION_TRACE_PTR(ex_read_gpio, obj_desc);
/*
* For GPIO (general_purpose_io), the Address will be the bit offset
* from the previous Connection() operator, making it effectively a
* pin number index. The bit_length is the length of the field, which
* is thus the number of pins.
*/
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"GPIO FieldRead [FROM]: Pin %u Bits %u\n",
obj_desc->field.pin_number_index,
obj_desc->field.bit_length));
/* Lock entire transaction if requested */
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
/* Perform the read */
status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, ACPI_READ);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_write_gpio
*
* PARAMETERS: source_desc - Contains data to write. Expect to be
* an Integer object.
* obj_desc - The named field
* result_desc - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Write to a named field that references a General Purpose I/O
* field.
*
******************************************************************************/
static acpi_status
acpi_ex_write_gpio(union acpi_operand_object *source_desc,
union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer)
{
acpi_status status;
void *buffer;
ACPI_FUNCTION_TRACE_PTR(ex_write_gpio, obj_desc);
/*
* For GPIO (general_purpose_io), we will bypass the entire field
* mechanism and handoff the bit address and bit width directly to
* the handler. The Address will be the bit offset
* from the previous Connection() operator, making it effectively a
* pin number index. The bit_length is the length of the field, which
* is thus the number of pins.
*/
if (source_desc->common.type != ACPI_TYPE_INTEGER) {
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"GPIO FieldWrite [FROM]: (%s:%X), Value %.8X [TO]: Pin %u Bits %u\n",
acpi_ut_get_type_name(source_desc->common.type),
source_desc->common.type,
(u32)source_desc->integer.value,
obj_desc->field.pin_number_index,
obj_desc->field.bit_length));
buffer = &source_desc->integer.value;
/* Lock entire transaction if requested */
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
/* Perform the write */
status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, ACPI_WRITE);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_read_serial_bus
*
* PARAMETERS: obj_desc - The named field to read
* return_buffer - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Read from a named field that references a serial bus
* (SMBus, IPMI, or GSBus).
*
******************************************************************************/
static acpi_status
acpi_ex_read_serial_bus(union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer)
{
acpi_status status;
u32 buffer_length;
union acpi_operand_object *buffer_desc;
u32 function;
u16 accessor_type;
ACPI_FUNCTION_TRACE_PTR(ex_read_serial_bus, obj_desc);
/*
* This is an SMBus, GSBus or IPMI read. We must create a buffer to
* hold the data and then directly access the region handler.
*
* Note: SMBus and GSBus protocol value is passed in upper 16-bits
* of Function
*
* Common buffer format:
* Status; (Byte 0 of the data buffer)
* Length; (Byte 1 of the data buffer)
* Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
*/
switch (obj_desc->field.region_obj->region.space_id) {
case ACPI_ADR_SPACE_SMBUS:
buffer_length = ACPI_SMBUS_BUFFER_SIZE;
function = ACPI_READ | (obj_desc->field.attribute << 16);
break;
case ACPI_ADR_SPACE_IPMI:
buffer_length = ACPI_IPMI_BUFFER_SIZE;
function = ACPI_READ;
break;
case ACPI_ADR_SPACE_GSBUS:
accessor_type = obj_desc->field.attribute;
if (accessor_type == AML_FIELD_ATTRIB_RAW_PROCESS_BYTES) {
ACPI_ERROR((AE_INFO,
"Invalid direct read using bidirectional write-then-read protocol"));
return_ACPI_STATUS(AE_AML_PROTOCOL);
}
status =
acpi_ex_get_protocol_buffer_length(accessor_type,
&buffer_length);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
"Invalid protocol ID for GSBus: 0x%4.4X",
accessor_type));
return_ACPI_STATUS(status);
}
/* Add header length to get the full size of the buffer */
buffer_length += ACPI_SERIAL_HEADER_SIZE;
function = ACPI_READ | (accessor_type << 16);
break;
default:
return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
}
/* Create the local transfer buffer that is returned to the caller */
buffer_desc = acpi_ut_create_buffer_object(buffer_length);
if (!buffer_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Lock entire transaction if requested */
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
/* Call the region handler for the write-then-read */
status = acpi_ex_access_region(obj_desc, 0,
ACPI_CAST_PTR(u64,
buffer_desc->buffer.
pointer), function);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
*return_buffer = buffer_desc;
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_write_serial_bus
*
* PARAMETERS: source_desc - Contains data to write
* obj_desc - The named field
* return_buffer - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Write to a named field that references a serial bus
* (SMBus, IPMI, GSBus).
*
******************************************************************************/
static acpi_status
acpi_ex_write_serial_bus(union acpi_operand_object *source_desc,
union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer)
{
acpi_status status;
u32 buffer_length;
u32 data_length;
void *buffer;
union acpi_operand_object *buffer_desc;
u32 function;
u16 accessor_type;
ACPI_FUNCTION_TRACE_PTR(ex_write_serial_bus, obj_desc);
/*
* This is an SMBus, GSBus or IPMI write. We will bypass the entire
* field mechanism and handoff the buffer directly to the handler.
* For these address spaces, the buffer is bidirectional; on a
* write, return data is returned in the same buffer.
*
* Source must be a buffer of sufficient size, these are fixed size:
* ACPI_SMBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
*
* Note: SMBus and GSBus protocol type is passed in upper 16-bits
* of Function
*
* Common buffer format:
* Status; (Byte 0 of the data buffer)
* Length; (Byte 1 of the data buffer)
* Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
*/
if (source_desc->common.type != ACPI_TYPE_BUFFER) {
ACPI_ERROR((AE_INFO,
"SMBus/IPMI/GenericSerialBus write requires "
"Buffer, found type %s",
acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
switch (obj_desc->field.region_obj->region.space_id) {
case ACPI_ADR_SPACE_SMBUS:
buffer_length = ACPI_SMBUS_BUFFER_SIZE;
data_length = ACPI_SMBUS_DATA_SIZE;
function = ACPI_WRITE | (obj_desc->field.attribute << 16);
break;
case ACPI_ADR_SPACE_IPMI:
buffer_length = ACPI_IPMI_BUFFER_SIZE;
data_length = ACPI_IPMI_DATA_SIZE;
function = ACPI_WRITE;
break;
case ACPI_ADR_SPACE_GSBUS:
accessor_type = obj_desc->field.attribute;
status =
acpi_ex_get_protocol_buffer_length(accessor_type,
&buffer_length);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
"Invalid protocol ID for GSBus: 0x%4.4X",
accessor_type));
return_ACPI_STATUS(status);
}
/* Add header length to get the full size of the buffer */
buffer_length += ACPI_SERIAL_HEADER_SIZE;
data_length = source_desc->buffer.pointer[1];
function = ACPI_WRITE | (accessor_type << 16);
break;
default:
return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
}
#if 0
OBSOLETE ?
/* Check for possible buffer overflow */
if (data_length > source_desc->buffer.length) {
ACPI_ERROR((AE_INFO,
"Length in buffer header (%u)(%u) is greater than "
"the physical buffer length (%u) and will overflow",
data_length, buffer_length,
source_desc->buffer.length));
return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
}
#endif
/* Create the transfer/bidirectional/return buffer */
buffer_desc = acpi_ut_create_buffer_object(buffer_length);
if (!buffer_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Copy the input buffer data to the transfer buffer */
buffer = buffer_desc->buffer.pointer;
memcpy(buffer, source_desc->buffer.pointer, data_length);
/* Lock entire transaction if requested */
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
/*
* Perform the write (returns status and perhaps data in the
* same buffer)
*/
status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, function);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
*return_buffer = buffer_desc;
return_ACPI_STATUS(status);
}
drivers/acpi/acpica/exserial.c 0 → 100644
浏览文件 @ 9e9f8733
// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
/******************************************************************************
*
* Module Name: exserial - field_unit support for serial address spaces
*
* Copyright (C) 2000 - 2018, Intel Corp.
*
*****************************************************************************/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acdispat.h"
#include "acinterp.h"
#include "amlcode.h"
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exserial")
/*******************************************************************************
*
* FUNCTION: acpi_ex_read_gpio
*
* PARAMETERS: obj_desc - The named field to read
* buffer - Where the return data is returnd
*
* RETURN: Status
*
* DESCRIPTION: Read from a named field that references a Generic Serial Bus
* field
*
******************************************************************************/
acpi_status acpi_ex_read_gpio(union acpi_operand_object *obj_desc, void *buffer)
{
acpi_status status;
ACPI_FUNCTION_TRACE_PTR(ex_read_gpio, obj_desc);
/*
* For GPIO (general_purpose_io), the Address will be the bit offset
* from the previous Connection() operator, making it effectively a
* pin number index. The bit_length is the length of the field, which
* is thus the number of pins.
*/
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"GPIO FieldRead [FROM]: Pin %u Bits %u\n",
obj_desc->field.pin_number_index,
obj_desc->field.bit_length));
/* Lock entire transaction if requested */
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
/* Perform the read */
status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, ACPI_READ);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_write_gpio
*
* PARAMETERS: source_desc - Contains data to write. Expect to be
* an Integer object.
* obj_desc - The named field
* result_desc - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Write to a named field that references a General Purpose I/O
* field.
*
******************************************************************************/
acpi_status
acpi_ex_write_gpio(union acpi_operand_object *source_desc,
union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer)
{
acpi_status status;
void *buffer;
ACPI_FUNCTION_TRACE_PTR(ex_write_gpio, obj_desc);
/*
* For GPIO (general_purpose_io), we will bypass the entire field
* mechanism and handoff the bit address and bit width directly to
* the handler. The Address will be the bit offset
* from the previous Connection() operator, making it effectively a
* pin number index. The bit_length is the length of the field, which
* is thus the number of pins.
*/
if (source_desc->common.type != ACPI_TYPE_INTEGER) {
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"GPIO FieldWrite [FROM]: (%s:%X), Value %.8X [TO]: Pin %u Bits %u\n",
acpi_ut_get_type_name(source_desc->common.type),
source_desc->common.type,
(u32)source_desc->integer.value,
obj_desc->field.pin_number_index,
obj_desc->field.bit_length));
buffer = &source_desc->integer.value;
/* Lock entire transaction if requested */
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
/* Perform the write */
status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, ACPI_WRITE);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_read_serial_bus
*
* PARAMETERS: obj_desc - The named field to read
* return_buffer - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Read from a named field that references a serial bus
* (SMBus, IPMI, or GSBus).
*
******************************************************************************/
acpi_status
acpi_ex_read_serial_bus(union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer)
{
acpi_status status;
u32 buffer_length;
union acpi_operand_object *buffer_desc;
u32 function;
u16 accessor_type;
ACPI_FUNCTION_TRACE_PTR(ex_read_serial_bus, obj_desc);
/*
* This is an SMBus, GSBus or IPMI read. We must create a buffer to
* hold the data and then directly access the region handler.
*
* Note: SMBus and GSBus protocol value is passed in upper 16-bits
* of Function
*
* Common buffer format:
* Status; (Byte 0 of the data buffer)
* Length; (Byte 1 of the data buffer)
* Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
*/
switch (obj_desc->field.region_obj->region.space_id) {
case ACPI_ADR_SPACE_SMBUS:
buffer_length = ACPI_SMBUS_BUFFER_SIZE;
function = ACPI_READ | (obj_desc->field.attribute << 16);
break;
case ACPI_ADR_SPACE_IPMI:
buffer_length = ACPI_IPMI_BUFFER_SIZE;
function = ACPI_READ;
break;
case ACPI_ADR_SPACE_GSBUS:
accessor_type = obj_desc->field.attribute;
if (accessor_type == AML_FIELD_ATTRIB_RAW_PROCESS_BYTES) {
ACPI_ERROR((AE_INFO,
"Invalid direct read using bidirectional write-then-read protocol"));
return_ACPI_STATUS(AE_AML_PROTOCOL);
}
status =
acpi_ex_get_protocol_buffer_length(accessor_type,
&buffer_length);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
"Invalid protocol ID for GSBus: 0x%4.4X",
accessor_type));
return_ACPI_STATUS(status);
}
/* Add header length to get the full size of the buffer */
buffer_length += ACPI_SERIAL_HEADER_SIZE;
function = ACPI_READ | (accessor_type << 16);
break;
default:
return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
}
/* Create the local transfer buffer that is returned to the caller */
buffer_desc = acpi_ut_create_buffer_object(buffer_length);
if (!buffer_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Lock entire transaction if requested */
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
/* Call the region handler for the write-then-read */
status = acpi_ex_access_region(obj_desc, 0,
ACPI_CAST_PTR(u64,
buffer_desc->buffer.
pointer), function);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
*return_buffer = buffer_desc;
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_write_serial_bus
*
* PARAMETERS: source_desc - Contains data to write
* obj_desc - The named field
* return_buffer - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Write to a named field that references a serial bus
* (SMBus, IPMI, GSBus).
*
******************************************************************************/
acpi_status
acpi_ex_write_serial_bus(union acpi_operand_object *source_desc,
union acpi_operand_object *obj_desc,
union acpi_operand_object **return_buffer)
{
acpi_status status;
u32 buffer_length;
u32 data_length;
void *buffer;
union acpi_operand_object *buffer_desc;
u32 function;
u16 accessor_type;
ACPI_FUNCTION_TRACE_PTR(ex_write_serial_bus, obj_desc);
/*
* This is an SMBus, GSBus or IPMI write. We will bypass the entire
* field mechanism and handoff the buffer directly to the handler.
* For these address spaces, the buffer is bidirectional; on a
* write, return data is returned in the same buffer.
*
* Source must be a buffer of sufficient size, these are fixed size:
* ACPI_SMBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
*
* Note: SMBus and GSBus protocol type is passed in upper 16-bits
* of Function
*
* Common buffer format:
* Status; (Byte 0 of the data buffer)
* Length; (Byte 1 of the data buffer)
* Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
*/
if (source_desc->common.type != ACPI_TYPE_BUFFER) {
ACPI_ERROR((AE_INFO,
"SMBus/IPMI/GenericSerialBus write requires "
"Buffer, found type %s",
acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
switch (obj_desc->field.region_obj->region.space_id) {
case ACPI_ADR_SPACE_SMBUS:
buffer_length = ACPI_SMBUS_BUFFER_SIZE;
data_length = ACPI_SMBUS_DATA_SIZE;
function = ACPI_WRITE | (obj_desc->field.attribute << 16);
break;
case ACPI_ADR_SPACE_IPMI:
buffer_length = ACPI_IPMI_BUFFER_SIZE;
data_length = ACPI_IPMI_DATA_SIZE;
function = ACPI_WRITE;
break;
case ACPI_ADR_SPACE_GSBUS:
accessor_type = obj_desc->field.attribute;
status =
acpi_ex_get_protocol_buffer_length(accessor_type,
&buffer_length);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
"Invalid protocol ID for GSBus: 0x%4.4X",
accessor_type));
return_ACPI_STATUS(status);
}
/* Add header length to get the full size of the buffer */
buffer_length += ACPI_SERIAL_HEADER_SIZE;
data_length = source_desc->buffer.pointer[1];
function = ACPI_WRITE | (accessor_type << 16);
break;
default:
return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
}
#if 0
OBSOLETE ?
/* Check for possible buffer overflow */
if (data_length > source_desc->buffer.length) {
ACPI_ERROR((AE_INFO,
"Length in buffer header (%u)(%u) is greater than "
"the physical buffer length (%u) and will overflow",
data_length, buffer_length,
source_desc->buffer.length));
return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
}
#endif
/* Create the transfer/bidirectional/return buffer */
buffer_desc = acpi_ut_create_buffer_object(buffer_length);
if (!buffer_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Copy the input buffer data to the transfer buffer */
buffer = buffer_desc->buffer.pointer;
memcpy(buffer, source_desc->buffer.pointer, data_length);
/* Lock entire transaction if requested */
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
/*
* Perform the write (returns status and perhaps data in the
* same buffer)
*/
status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, function);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
*return_buffer = buffer_desc;
return_ACPI_STATUS(status);
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或