net: phy: allow PHY drivers to implement their own software reset

As pointed out by Shaohui, most 10G PHYs out there have a non-standard
compliant software reset sequence, eventually something much more
complex than just toggling the BMCR_RESET bit. Allow PHY driver to
implement their own soft_reset() callback to deal with that. If no
callback is provided, call into genphy_soft_reset() which makes sure the
existing behavior is kept intact.
Reported-by: NShaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/phy/phy_device.c

@@ -535,12 +535,16 @@ static int phy_poll_reset(struct phy_device *phydev)
 
 int phy_init_hw(struct phy_device *phydev)
 {
-	int ret;
+	int ret = 0;
 
 	if (!phydev->drv || !phydev->drv->config_init)
 		return 0;
 
-	ret = genphy_soft_reset(phydev);
+	if (phydev->drv->soft_reset)
+		ret = phydev->drv->soft_reset(phydev);
+	else
+		ret = genphy_soft_reset(phydev);
+
 	if (ret < 0)
 		return ret;
 
@@ -1108,6 +1112,12 @@ static int genphy_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int gen10g_soft_reset(struct phy_device *phydev)
+{
+	/* Do nothing for now */
+	return 0;
+}
+
 static int gen10g_config_init(struct phy_device *phydev)
 {
 	/* Temporarily just say we support everything */
@@ -1282,6 +1292,7 @@ static struct phy_driver genphy_driver[] = {
 	.phy_id		= 0xffffffff,
 	.phy_id_mask	= 0xffffffff,
 	.name		= "Generic PHY",
+	.soft_reset	= genphy_soft_reset,
 	.config_init	= genphy_config_init,
 	.features	= 0,
 	.config_aneg	= genphy_config_aneg,
@@ -1294,6 +1305,7 @@ static struct phy_driver genphy_driver[] = {
 	.phy_id         = 0xffffffff,
 	.phy_id_mask    = 0xffffffff,
 	.name           = "Generic 10G PHY",
+	.soft_reset	= gen10g_soft_reset,
 	.config_init    = gen10g_config_init,
 	.features       = 0,
 	.config_aneg    = gen10g_config_aneg,

include/linux/phy.h

@@ -439,6 +439,11 @@ struct phy_driver {
 	u32 features;
 	u32 flags;
 
+	/*
+	 * Called to issue a PHY software reset
+	 */
+	int (*soft_reset)(struct phy_device *phydev);
+
 	/*
 	 * Called to initialize the PHY,
 	 * including after a reset