drm/amdgpu: add vram_info v2_5 in atomfirmware header

vram_info v2_5 was introduced to support sienna_cichlid
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/include/atomfirmware.h

@@ -2313,6 +2313,130 @@ struct atom_vram_info_header_v2_4 {
   struct   atom_vram_module_v10  vram_module[16];        // just for allocation, real number of blocks is in ucNumOfVRAMModule;
 };
 
+struct atom_vram_module_v11 {
+	// Design Specific Values
+	uint32_t  memory_size;                   // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
+	uint32_t  channel_enable;                // bit vector, each bit indicate specific channel enable or not
+	uint16_t  mem_voltage;                   // mem_voltage
+	uint16_t  vram_module_size;              // Size of atom_vram_module_v9
+	uint8_t   ext_memory_id;                 // Current memory module ID
+	uint8_t   memory_type;                   // enum of atom_dgpu_vram_type
+	uint8_t   channel_num;                   // Number of mem. channels supported in this module
+	uint8_t   channel_width;                 // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
+	uint8_t   density;                       // _8Mx32, _16Mx32, _16Mx16, _32Mx16
+	uint8_t   tunningset_id;                 // MC phy registers set per.
+	uint16_t  reserved[4];                   // reserved
+	uint8_t   vender_rev_id;                 // [7:4] Revision, [3:0] Vendor code
+	uint8_t   refreshrate;			 // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
+	uint8_t   vram_flags;			 // bit0= bankgroup enable
+	uint8_t   vram_rsd2;			 // reserved
+	uint16_t  gddr6_mr10;                    // gddr6 mode register10 value
+	uint16_t  gddr6_mr0;                     // gddr6 mode register0 value
+	uint16_t  gddr6_mr1;                     // gddr6 mode register1 value
+	uint16_t  gddr6_mr2;                     // gddr6 mode register2 value
+	uint16_t  gddr6_mr4;                     // gddr6 mode register4 value
+	uint16_t  gddr6_mr7;                     // gddr6 mode register7 value
+	uint16_t  gddr6_mr8;                     // gddr6 mode register8 value
+	char    dram_pnstring[40];               // part number end with '0'.
+};
+
+struct atom_gddr6_ac_timing_v2_5 {
+	uint32_t  u32umc_id_access;
+	uint8_t  RL;
+	uint8_t  WL;
+	uint8_t  tRAS;
+	uint8_t  tRC;
+
+	uint16_t  tREFI;
+	uint8_t  tRFC;
+	uint8_t  tRFCpb;
+
+	uint8_t  tRREFD;
+	uint8_t  tRCDRD;
+	uint8_t  tRCDWR;
+	uint8_t  tRP;
+
+	uint8_t  tRRDS;
+	uint8_t  tRRDL;
+	uint8_t  tWR;
+	uint8_t  tWTRS;
+
+	uint8_t  tWTRL;
+	uint8_t  tFAW;
+	uint8_t  tCCDS;
+	uint8_t  tCCDL;
+
+	uint8_t  tCRCRL;
+	uint8_t  tCRCWL;
+	uint8_t  tCKE;
+	uint8_t  tCKSRE;
+
+	uint8_t  tCKSRX;
+	uint8_t  tRTPS;
+	uint8_t  tRTPL;
+	uint8_t  tMRD;
+
+	uint8_t  tMOD;
+	uint8_t  tXS;
+	uint8_t  tXHP;
+	uint8_t  tXSMRS;
+
+	uint32_t  tXSH;
+
+	uint8_t  tPD;
+	uint8_t  tXP;
+	uint8_t  tCPDED;
+	uint8_t  tACTPDE;
+
+	uint8_t  tPREPDE;
+	uint8_t  tREFPDE;
+	uint8_t  tMRSPDEN;
+	uint8_t  tRDSRE;
+
+	uint8_t  tWRSRE;
+	uint8_t  tPPD;
+	uint8_t  tCCDMW;
+	uint8_t  tWTRTR;
+
+	uint8_t  tLTLTR;
+	uint8_t  tREFTR;
+	uint8_t  VNDR;
+	uint8_t  reserved[9];
+};
+
+struct atom_gddr6_bit_byte_remap {
+	uint32_t dphy_byteremap;    //mmUMC_DPHY_ByteRemap
+	uint32_t dphy_bitremap0;    //mmUMC_DPHY_BitRemap0
+	uint32_t dphy_bitremap1;    //mmUMC_DPHY_BitRemap1
+	uint32_t dphy_bitremap2;    //mmUMC_DPHY_BitRemap2
+	uint32_t aphy_bitremap0;    //mmUMC_APHY_BitRemap0
+	uint32_t aphy_bitremap1;    //mmUMC_APHY_BitRemap1
+	uint32_t phy_dram;          //mmUMC_PHY_DRAM
+};
+
+struct atom_gddr6_dram_data_remap {
+	uint32_t table_size;
+	uint8_t phyintf_ck_inverted[8];     //UMC_PHY_PHYINTF_CNTL.INV_CK
+	struct atom_gddr6_bit_byte_remap bit_byte_remap[16];
+};
+
+struct atom_vram_info_header_v2_5 {
+	struct   atom_common_table_header table_header;
+	uint16_t mem_adjust_tbloffset;                         // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust settings
+	uint16_t gddr6_ac_timing_offset;                     // offset of atom_gddr6_ac_timing_v2_5 structure for memory clock specific UMC settings
+	uint16_t mc_adjust_pertile_tbloffset;                  // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings
+	uint16_t mc_phyinit_tbloffset;                         // offset of atom_umc_init_reg_block structure for MC phy init set
+	uint16_t dram_data_remap_tbloffset;                    // offset of atom_gddr6_dram_data_remap array to indicate DRAM data lane to GPU mapping
+	uint16_t reserved;                                     // offset of reserved
+	uint16_t post_ucode_init_offset;                       // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
+	uint16_t strobe_mode_patch_tbloffset;                  // offset of atom_umc_init_reg_block structure for Strobe Mode memory clock specific UMC settings
+	uint8_t  vram_module_num;                              // indicate number of VRAM module
+	uint8_t  umcip_min_ver;
+	uint8_t  umcip_max_ver;
+	uint8_t  mc_phy_tile_num;                              // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
+	struct   atom_vram_module_v11  vram_module[16];        // just for allocation, real number of blocks is in ucNumOfVRAMModule;
+};
+
 /* 
   ***************************************************************************
     Data Table voltageobject_info  structure