提交 9c6f7085 编写于 作者: H Huazhong Tan 提交者: David S. Miller

net: hns3: add reset_hdev to reinit the hdev in VF's reset process

When doing reset, the reset handling function only need to
reinitialize hardware, it makes sense to add a function to
do that job. Also the error handling of hclgevf_init_hdev is
different when it is used in reset process.

This patch adds reset_hdev to reinitialize hardware when resetting.
Also, this patch removes the hclgevf_dev_ongoing_full_reset because
it is unused now.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 40c4b1e9
......@@ -10,8 +10,7 @@
#define HCLGEVF_NAME "hclgevf"
static int hclgevf_init_hdev(struct hclgevf_dev *hdev);
static void hclgevf_uninit_hdev(struct hclgevf_dev *hdev);
static int hclgevf_reset_hdev(struct hclgevf_dev *hdev);
static struct hnae3_ae_algo ae_algovf;
static const struct pci_device_id ae_algovf_pci_tbl[] = {
......@@ -209,12 +208,6 @@ static int hclgevf_alloc_tqps(struct hclgevf_dev *hdev)
struct hclgevf_tqp *tqp;
int i;
/* if this is on going reset then we need to re-allocate the TPQs
* since we cannot assume we would get same number of TPQs back from PF
*/
if (hclgevf_dev_ongoing_reset(hdev))
devm_kfree(&hdev->pdev->dev, hdev->htqp);
hdev->htqp = devm_kcalloc(&hdev->pdev->dev, hdev->num_tqps,
sizeof(struct hclgevf_tqp), GFP_KERNEL);
if (!hdev->htqp)
......@@ -258,12 +251,6 @@ static int hclgevf_knic_setup(struct hclgevf_dev *hdev)
new_tqps = kinfo->rss_size * kinfo->num_tc;
kinfo->num_tqps = min(new_tqps, hdev->num_tqps);
/* if this is on going reset then we need to re-allocate the hnae queues
* as well since number of TPQs from PF might have changed.
*/
if (hclgevf_dev_ongoing_reset(hdev))
devm_kfree(&hdev->pdev->dev, kinfo->tqp);
kinfo->tqp = devm_kcalloc(&hdev->pdev->dev, kinfo->num_tqps,
sizeof(struct hnae3_queue *), GFP_KERNEL);
if (!kinfo->tqp)
......@@ -1141,7 +1128,7 @@ static int hclgevf_reset_stack(struct hclgevf_dev *hdev)
hclgevf_notify_client(hdev, HNAE3_UNINIT_CLIENT);
/* re-initialize the hclge device */
ret = hclgevf_init_hdev(hdev);
ret = hclgevf_reset_hdev(hdev);
if (ret) {
dev_err(&hdev->pdev->dev,
"hclge device re-init failed, VF is disabled!\n");
......@@ -1615,10 +1602,6 @@ static void hclgevf_ae_stop(struct hnae3_handle *handle)
static void hclgevf_state_init(struct hclgevf_dev *hdev)
{
/* if this is on going reset then skip this initialization */
if (hclgevf_dev_ongoing_reset(hdev))
return;
/* setup tasks for the MBX */
INIT_WORK(&hdev->mbx_service_task, hclgevf_mailbox_service_task);
clear_bit(HCLGEVF_STATE_MBX_SERVICE_SCHED, &hdev->state);
......@@ -1660,10 +1643,6 @@ static int hclgevf_init_msi(struct hclgevf_dev *hdev)
int vectors;
int i;
/* if this is on going reset then skip this initialization */
if (hclgevf_dev_ongoing_reset(hdev))
return 0;
if (hnae3_get_bit(hdev->ae_dev->flag, HNAE3_DEV_SUPPORT_ROCE_B))
vectors = pci_alloc_irq_vectors(pdev,
hdev->roce_base_msix_offset + 1,
......@@ -1720,10 +1699,6 @@ static int hclgevf_misc_irq_init(struct hclgevf_dev *hdev)
{
int ret = 0;
/* if this is on going reset then skip this initialization */
if (hclgevf_dev_ongoing_reset(hdev))
return 0;
hclgevf_get_misc_vector(hdev);
ret = request_irq(hdev->misc_vector.vector_irq, hclgevf_misc_irq_handle,
......@@ -1853,14 +1828,6 @@ static int hclgevf_pci_init(struct hclgevf_dev *hdev)
struct hclgevf_hw *hw;
int ret;
/* check if we need to skip initialization of pci. This will happen if
* device is undergoing VF reset. Otherwise, we would need to
* re-initialize pci interface again i.e. when device is not going
* through *any* reset or actually undergoing full reset.
*/
if (hclgevf_dev_ongoing_reset(hdev))
return 0;
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "failed to enable PCI device\n");
......@@ -1949,17 +1916,41 @@ static int hclgevf_query_vf_resource(struct hclgevf_dev *hdev)
return 0;
}
static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
{
struct pci_dev *pdev = hdev->pdev;
int ret;
/* check if device is on-going full reset(i.e. pcie as well) */
if (hclgevf_dev_ongoing_full_reset(hdev)) {
dev_warn(&pdev->dev, "device is going full reset\n");
hclgevf_uninit_hdev(hdev);
ret = hclgevf_cmd_init(hdev);
if (ret) {
dev_err(&pdev->dev, "cmd failed %d\n", ret);
return ret;
}
ret = hclgevf_rss_init_hw(hdev);
if (ret) {
dev_err(&hdev->pdev->dev,
"failed(%d) to initialize RSS\n", ret);
return ret;
}
ret = hclgevf_init_vlan_config(hdev);
if (ret) {
dev_err(&hdev->pdev->dev,
"failed(%d) to initialize VLAN config\n", ret);
return ret;
}
dev_info(&hdev->pdev->dev, "Reset done\n");
return 0;
}
static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
{
struct pci_dev *pdev = hdev->pdev;
int ret;
ret = hclgevf_pci_init(hdev);
if (ret) {
dev_err(&pdev->dev, "PCI initialization failed\n");
......
......@@ -196,20 +196,6 @@ struct hclgevf_dev {
u32 flag;
};
static inline bool hclgevf_dev_ongoing_reset(struct hclgevf_dev *hdev)
{
return (hdev &&
(test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state)) &&
(hdev->reset_level == HNAE3_VF_RESET));
}
static inline bool hclgevf_dev_ongoing_full_reset(struct hclgevf_dev *hdev)
{
return (hdev &&
(test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state)) &&
(hdev->reset_level == HNAE3_VF_FULL_RESET));
}
int hclgevf_send_mbx_msg(struct hclgevf_dev *hdev, u16 code, u16 subcode,
const u8 *msg_data, u8 msg_len, bool need_resp,
u8 *resp_data, u16 resp_len);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册