提交 9b8e895c 编写于 作者: A Andrew Lunn 提交者: David S. Miller

net: dsa: Split up creating/destroying of DSA and CPU ports

Refactor the code to setup a single DSA/CPU port into a function of
its own, and export it, so it can be used by the new binding.

Similarly, refactor the destroy code into a function.  When destroying
the ports, don't put the of node. They should be released at the end
along with the normal ports.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 66472fc0
......@@ -180,36 +180,47 @@ __ATTRIBUTE_GROUPS(dsa_hwmon);
#endif /* CONFIG_NET_DSA_HWMON */
/* basic switch operations **************************************************/
static int dsa_cpu_dsa_setup(struct dsa_switch *ds, struct net_device *master)
int dsa_cpu_dsa_setup(struct dsa_switch *ds, struct device *dev,
struct device_node *port_dn, int port)
{
struct device_node *port_dn;
struct phy_device *phydev;
int ret, port, mode;
int ret, mode;
if (of_phy_is_fixed_link(port_dn)) {
ret = of_phy_register_fixed_link(port_dn);
if (ret) {
dev_err(dev, "failed to register fixed PHY\n");
return ret;
}
phydev = of_phy_find_device(port_dn);
mode = of_get_phy_mode(port_dn);
if (mode < 0)
mode = PHY_INTERFACE_MODE_NA;
phydev->interface = mode;
genphy_config_init(phydev);
genphy_read_status(phydev);
if (ds->drv->adjust_link)
ds->drv->adjust_link(ds, port, phydev);
}
return 0;
}
static int dsa_cpu_dsa_setups(struct dsa_switch *ds, struct device *dev)
{
struct device_node *port_dn;
int ret, port;
for (port = 0; port < DSA_MAX_PORTS; port++) {
if (!(dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)))
continue;
port_dn = ds->ports[port].dn;
if (of_phy_is_fixed_link(port_dn)) {
ret = of_phy_register_fixed_link(port_dn);
if (ret) {
netdev_err(master,
"failed to register fixed PHY\n");
return ret;
}
phydev = of_phy_find_device(port_dn);
mode = of_get_phy_mode(port_dn);
if (mode < 0)
mode = PHY_INTERFACE_MODE_NA;
phydev->interface = mode;
genphy_config_init(phydev);
genphy_read_status(phydev);
if (ds->drv->adjust_link)
ds->drv->adjust_link(ds, port, phydev);
}
ret = dsa_cpu_dsa_setup(ds, dev, port_dn, port);
if (ret)
return ret;
}
return 0;
}
......@@ -340,7 +351,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
}
/* Perform configuration of the CPU and DSA ports */
ret = dsa_cpu_dsa_setup(ds, dst->master_netdev);
ret = dsa_cpu_dsa_setups(ds, parent);
if (ret < 0) {
netdev_err(dst->master_netdev, "[%d] : can't configure CPU and DSA ports\n",
index);
......@@ -423,10 +434,21 @@ dsa_switch_setup(struct dsa_switch_tree *dst, int index,
return ds;
}
static void dsa_switch_destroy(struct dsa_switch *ds)
void dsa_cpu_dsa_destroy(struct device_node *port_dn)
{
struct device_node *port_dn;
struct phy_device *phydev;
if (of_phy_is_fixed_link(port_dn)) {
phydev = of_phy_find_device(port_dn);
if (phydev) {
phy_device_free(phydev);
fixed_phy_unregister(phydev);
}
}
}
static void dsa_switch_destroy(struct dsa_switch *ds)
{
int port;
#ifdef CONFIG_NET_DSA_HWMON
......@@ -445,17 +467,11 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
dsa_slave_destroy(ds->ports[port].netdev);
}
/* Remove any fixed link PHYs */
/* Disable configuration of the CPU and DSA ports */
for (port = 0; port < DSA_MAX_PORTS; port++) {
port_dn = ds->ports[port].dn;
if (of_phy_is_fixed_link(port_dn)) {
phydev = of_phy_find_device(port_dn);
if (phydev) {
phy_device_free(phydev);
of_node_put(port_dn);
fixed_phy_unregister(phydev);
}
}
if (!(dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)))
continue;
dsa_cpu_dsa_destroy(ds->ports[port].dn);
}
mdiobus_unregister(ds->slave_mii_bus);
......
......@@ -50,6 +50,9 @@ struct dsa_slave_priv {
/* dsa.c */
extern char dsa_driver_version[];
int dsa_cpu_dsa_setup(struct dsa_switch *ds, struct device *dev,
struct device_node *port_dn, int port);
void dsa_cpu_dsa_destroy(struct device_node *port_dn);
/* slave.c */
extern const struct dsa_device_ops notag_netdev_ops;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册