提交 9b273901 编写于 作者: V Ville Syrjälä 提交者: Rodrigo Vivi

drm/i915: Use the correct crtc when sanitizing plane mapping

When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.

To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.

One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.

v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
    Add Daniel's proposed comment to better document why we do this
    Drop the redundant intel_set_plane_visible() call

Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: NDennis <dennis.nezic@utoronto.ca>
Tested-by: NPeter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595 ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 62358aa4)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
上级 7cada4d0
......@@ -2764,20 +2764,33 @@ intel_set_plane_visible(struct intel_crtc_state *crtc_state,
plane_state->base.visible = visible;
/* FIXME pre-g4x don't work like this */
if (visible) {
if (visible)
crtc_state->base.plane_mask |= drm_plane_mask(&plane->base);
crtc_state->active_planes |= BIT(plane->id);
} else {
else
crtc_state->base.plane_mask &= ~drm_plane_mask(&plane->base);
crtc_state->active_planes &= ~BIT(plane->id);
}
DRM_DEBUG_KMS("%s active planes 0x%x\n",
crtc_state->base.crtc->name,
crtc_state->active_planes);
}
static void fixup_active_planes(struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
struct drm_plane *plane;
/*
* Active_planes aliases if multiple "primary" or cursor planes
* have been used on the same (or wrong) pipe. plane_mask uses
* unique ids, hence we can use that to reconstruct active_planes.
*/
crtc_state->active_planes = 0;
drm_for_each_plane_mask(plane, &dev_priv->drm,
crtc_state->base.plane_mask)
crtc_state->active_planes |= BIT(to_intel_plane(plane)->id);
}
static void intel_plane_disable_noatomic(struct intel_crtc *crtc,
struct intel_plane *plane)
{
......@@ -2787,6 +2800,7 @@ static void intel_plane_disable_noatomic(struct intel_crtc *crtc,
to_intel_plane_state(plane->base.state);
intel_set_plane_visible(crtc_state, plane_state, false);
fixup_active_planes(crtc_state);
if (plane->id == PLANE_PRIMARY)
intel_pre_disable_primary_noatomic(&crtc->base);
......@@ -2805,7 +2819,6 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
struct drm_i915_gem_object *obj;
struct drm_plane *primary = intel_crtc->base.primary;
struct drm_plane_state *plane_state = primary->state;
struct drm_crtc_state *crtc_state = intel_crtc->base.state;
struct intel_plane *intel_plane = to_intel_plane(primary);
struct intel_plane_state *intel_state =
to_intel_plane_state(plane_state);
......@@ -2900,10 +2913,6 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
plane_state->fb = fb;
plane_state->crtc = &intel_crtc->base;
intel_set_plane_visible(to_intel_crtc_state(crtc_state),
to_intel_plane_state(plane_state),
true);
atomic_or(to_intel_plane(primary)->frontbuffer_bit,
&obj->frontbuffer_bits);
}
......@@ -15450,17 +15459,6 @@ void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
POSTING_READ(DPLL(pipe));
}
static bool intel_plane_mapping_ok(struct intel_crtc *crtc,
struct intel_plane *plane)
{
enum pipe pipe;
if (!plane->get_hw_state(plane, &pipe))
return true;
return pipe == crtc->pipe;
}
static void
intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv)
{
......@@ -15472,13 +15470,20 @@ intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv)
for_each_intel_crtc(&dev_priv->drm, crtc) {
struct intel_plane *plane =
to_intel_plane(crtc->base.primary);
struct intel_crtc *plane_crtc;
enum pipe pipe;
if (intel_plane_mapping_ok(crtc, plane))
if (!plane->get_hw_state(plane, &pipe))
continue;
if (pipe == crtc->pipe)
continue;
DRM_DEBUG_KMS("%s attached to the wrong pipe, disabling plane\n",
plane->base.name);
intel_plane_disable_noatomic(crtc, plane);
plane_crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
intel_plane_disable_noatomic(plane_crtc, plane);
}
}
......@@ -15646,23 +15651,32 @@ void i915_redisable_vga(struct drm_i915_private *dev_priv)
}
/* FIXME read out full plane state for all planes */
static void readout_plane_state(struct intel_crtc *crtc)
static void readout_plane_state(struct drm_i915_private *dev_priv)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_crtc_state *crtc_state =
to_intel_crtc_state(crtc->base.state);
struct intel_plane *plane;
struct intel_crtc *crtc;
for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
for_each_intel_plane(&dev_priv->drm, plane) {
struct intel_plane_state *plane_state =
to_intel_plane_state(plane->base.state);
enum pipe pipe;
struct intel_crtc_state *crtc_state;
enum pipe pipe = PIPE_A;
bool visible;
visible = plane->get_hw_state(plane, &pipe);
crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
crtc_state = to_intel_crtc_state(crtc->base.state);
intel_set_plane_visible(crtc_state, plane_state, visible);
}
for_each_intel_crtc(&dev_priv->drm, crtc) {
struct intel_crtc_state *crtc_state =
to_intel_crtc_state(crtc->base.state);
fixup_active_planes(crtc_state);
}
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
......@@ -15694,13 +15708,13 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
if (crtc_state->base.active)
dev_priv->active_crtcs |= 1 << crtc->pipe;
readout_plane_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
crtc->base.base.id, crtc->base.name,
enableddisabled(crtc_state->base.active));
}
readout_plane_state(dev_priv);
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册