arm64: dts: rdu3: add UCS1002 charge controller node

Add the charge controller node. With the controller driver loaded
the VBUS of the user USB socket is controlled exclusively via i2c
with the GPIO controls ignored, so vbus-supply for the user USB
port must be linked to the charge controller.

Hog the previously used GPIO control to unconditionally enable
VBUS until the driver is loaded.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi

@@ -68,18 +68,6 @@
 		regulator-always-on;
 	};
 
-	reg_5p0_user_usb: regulator-5p0-user-usb {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_user_usb>;
-		vin-supply = <&reg_5p0_main>;
-		regulator-name = "5V_USER_USB";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 12 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <1000>;
-	};
-
 	reg_usdhc2_vmmc: regulator-vsd-3v3 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_usdhc2>;
@@ -244,6 +232,13 @@
 		line-name = "usb-mode1";
 	};
 
+	usb-pwr {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "usb-pwr-ctrl-en-n";
+	};
+
 	usb-mode2 {
 		gpio-hog;
 		gpios = <13 GPIO_ACTIVE_HIGH>;
@@ -257,6 +252,17 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
+
+	ucs1002: charger@32 {
+		compatible = "microchip,ucs1002";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ucs1002>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <17 IRQ_TYPE_EDGE_BOTH>,
+		             <18 IRQ_TYPE_EDGE_BOTH>;
+		interrupt-names = "a_det", "alert";
+	};
 };
 
 &i2c2 {
@@ -428,7 +434,7 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_5p0_user_usb>;
+	vbus-supply = <&ucs1002>;
 	status = "okay";
 };
 
@@ -532,6 +538,7 @@
 		fsl,pins = <
 			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10		0x6
 			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x6
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x6
 			MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13		0x6
 		>;
 	};
@@ -597,12 +604,6 @@
 		>;
 	};
 
-	pinctrl_reg_user_usb: reguserusbgrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x6
-		>;
-	};
-
 	pinctrl_switch_irq: switchgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x41
@@ -630,6 +631,13 @@
 		>;
 	};
 
+	pinctrl_ucs1002: ucs1002grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x41
+			MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18		0x41
+		>;
+	};
+
 	pinctrl_usbhub: usbhubgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x41