提交 9adf5d22 编写于 作者: M Marek Szyprowski 提交者: Kukjin Kim

ARM: S5P: Unify defines for both gpio interrupt types

Samsung S5P SoCs have the same interrupt type defines for both
external interrupts and gpio interrupts. This patch removes all
duplicates from S5PC100 and S5PV210 specific includes as well as
gpio interrupt code and put a common defines to plat/irqs.h
NOTE: Do not use this for S5P6440 and S5P6450.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: add note for S5P64X0]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 8ce14a22
......@@ -64,13 +64,6 @@
#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
/* values for S5P_EXTINT0 */
#define S5P_EXTINT_LOWLEV (0x00)
#define S5P_EXTINT_HILEV (0x01)
#define S5P_EXTINT_FALLEDGE (0x02)
#define S5P_EXTINT_RISEEDGE (0x03)
#define S5P_EXTINT_BOTHEDGE (0x04)
#define EINT_MODE S3C_GPIO_SFN(0x2)
#define EINT_GPIO_0(x) S5PC100_GPH0(x)
......
......@@ -31,13 +31,6 @@
#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
/* values for S5P_EXTINT0 */
#define S5P_EXTINT_LOWLEV (0x00)
#define S5P_EXTINT_HILEV (0x01)
#define S5P_EXTINT_FALLEDGE (0x02)
#define S5P_EXTINT_RISEEDGE (0x03)
#define S5P_EXTINT_BOTHEDGE (0x04)
#define EINT_MODE S3C_GPIO_SFN(0xf)
#define EINT_GPIO_0(x) S5PV210_GPH0(x)
......
......@@ -103,4 +103,11 @@
#define S5P_GPIOINT_GROUP_SIZE 8
#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
/* IRQ types common for all s5p platforms */
#define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
#define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
#define S5P_IRQ_TYPE_EDGE_RISING (0x03)
#define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
#endif /* __ASM_PLAT_S5P_IRQS_H */
......@@ -67,23 +67,23 @@ static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
switch (type) {
case IRQ_TYPE_EDGE_RISING:
newvalue = S5P_EXTINT_RISEEDGE;
newvalue = S5P_IRQ_TYPE_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
newvalue = S5P_EXTINT_FALLEDGE;
newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
newvalue = S5P_EXTINT_BOTHEDGE;
newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_LOW:
newvalue = S5P_EXTINT_LOWLEV;
newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
break;
case IRQ_TYPE_LEVEL_HIGH:
newvalue = S5P_EXTINT_HILEV;
newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
break;
default:
......
......@@ -28,12 +28,6 @@
#define GPIOINT_MASK_OFFSET 0x900
#define GPIOINT_PEND_OFFSET 0xA00
#define GPIOINT_LEVEL_LOW 0x0
#define GPIOINT_LEVEL_HIGH 0x1
#define GPIOINT_EDGE_FALLING 0x2
#define GPIOINT_EDGE_RISING 0x3
#define GPIOINT_EDGE_BOTH 0x4
static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR];
static int s5p_gpioint_get_group(unsigned int irq)
......@@ -118,19 +112,19 @@ static int s5p_gpioint_set_type(unsigned int irq, unsigned int type)
switch (type) {
case IRQ_TYPE_EDGE_RISING:
type = GPIOINT_EDGE_RISING;
type = S5P_IRQ_TYPE_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
type = GPIOINT_EDGE_FALLING;
type = S5P_IRQ_TYPE_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
type = GPIOINT_EDGE_BOTH;
type = S5P_IRQ_TYPE_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_HIGH:
type = GPIOINT_LEVEL_HIGH;
type = S5P_IRQ_TYPE_LEVEL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
type = GPIOINT_LEVEL_LOW;
type = S5P_IRQ_TYPE_LEVEL_LOW;
break;
case IRQ_TYPE_NONE:
default:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册