提交 9ab073bc 编写于 作者: L Linus Torvalds

Merge tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev changes from Tomi Valkeinen:
 - Improvements to da8xx-fb to make it support v2 of the LCDC IP, used
   eg in BeagleBone
 - Himax HX8369 controller support
 - Various small fixes and cleanups

* tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits)
  video: da8xx-fb: fix the polarities of the hsync/vsync pulse
  video: da8xx-fb: support lcdc v2 timing register expansion
  video: da8xx-fb: fixing timing off by one errors
  video: da8xx-fb fixing incorrect porch mappings
  video: xilinxfb: replace devm_request_and_ioremap by devm_ioremap_resource
  fbmem: move EXPORT_SYMBOL annotation next to symbol declarations
  drivers: video: fbcmap: remove the redundency and incorrect checkings
  video: mxsfb: simplify use of devm_ioremap_resource
  Release efifb's colormap in efifb_destroy()
  at91/avr32/atmel_lcdfb: prepare clk before calling enable
  video: exynos: Ensure definitions match prototypes
  OMAPDSS: fix WARN_ON in 'alpha_blending_enabled' sysfs file
  OMAPDSS: HDMI: Fix possible NULL reference
  video: da8xx-fb: adding am33xx as dependency
  video: da8xx-fb: let compiler decide what to inline
  video: da8xx-fb: make clock naming consistent
  video: da8xx-fb: set upstream clock rate (if reqd)
  video: da8xx-fb: reorganize panel detection
  video: da8xx-fb: ensure non-null cfg in pdata
  video: da8xx-fb: use devres
  ...
......@@ -12,6 +12,7 @@ Required properties:
- stride: The number of bytes in each line of the framebuffer.
- format: The format of the framebuffer surface. Valid values are:
- r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
- a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
Example:
......
......@@ -2100,13 +2100,6 @@ config GPM1040A0_320X240
bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
depends on FB_NUC900
config FB_NUC900_DEBUG
bool "NUC900 lcd debug messages"
depends on FB_NUC900
help
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
config FB_SM501
tristate "Silicon Motion SM501 framebuffer support"
depends on FB && MFD_SM501
......@@ -2228,15 +2221,17 @@ config FB_SH7760
panels <= 320 pixel horizontal resolution.
config FB_DA8XX
tristate "DA8xx/OMAP-L1xx Framebuffer support"
depends on FB && ARCH_DAVINCI_DA8XX
tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_CFB_REV_PIXELS_IN_BYTE
select FB_MODE_HELPERS
select VIDEOMODE_HELPERS
---help---
This is the frame buffer device driver for the TI LCD controller
found on DA8xx/OMAP-L1xx SoCs.
found on DA8xx/OMAP-L1xx/AM335x SoCs.
If unsure, say N.
config FB_VIRTUAL
......
......@@ -902,14 +902,14 @@ static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
{
clk_enable(sinfo->bus_clk);
clk_enable(sinfo->lcdc_clk);
clk_prepare_enable(sinfo->bus_clk);
clk_prepare_enable(sinfo->lcdc_clk);
}
static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
{
clk_disable(sinfo->bus_clk);
clk_disable(sinfo->lcdc_clk);
clk_disable_unprepare(sinfo->bus_clk);
clk_disable_unprepare(sinfo->lcdc_clk);
}
......
......@@ -71,11 +71,24 @@
#define HX8357_SET_POWER_NORMAL 0xd2
#define HX8357_SET_PANEL_RELATED 0xe9
#define HX8369_SET_DISPLAY_BRIGHTNESS 0x51
#define HX8369_WRITE_CABC_DISPLAY_VALUE 0x53
#define HX8369_WRITE_CABC_BRIGHT_CTRL 0x55
#define HX8369_WRITE_CABC_MIN_BRIGHTNESS 0x5e
#define HX8369_SET_POWER 0xb1
#define HX8369_SET_DISPLAY_MODE 0xb2
#define HX8369_SET_DISPLAY_WAVEFORM_CYC 0xb4
#define HX8369_SET_VCOM 0xb6
#define HX8369_SET_EXTENSION_COMMAND 0xb9
#define HX8369_SET_GIP 0xd5
#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0
struct hx8357_data {
unsigned im_pins[HX8357_NUM_IM_PINS];
unsigned reset;
struct spi_device *spi;
int state;
bool use_im_pins;
};
static u8 hx8357_seq_power[] = {
......@@ -143,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
};
static u8 hx8369_seq_write_CABC_min_brightness[] = {
HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
};
static u8 hx8369_seq_write_CABC_control[] = {
HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
};
static u8 hx8369_seq_set_display_brightness[] = {
HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
};
static u8 hx8369_seq_write_CABC_control_setting[] = {
HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
};
static u8 hx8369_seq_extension_command[] = {
HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
};
static u8 hx8369_seq_display_related[] = {
HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x01,
};
static u8 hx8369_seq_panel_waveform_cycle[] = {
HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
};
static u8 hx8369_seq_set_address_mode[] = {
HX8357_SET_ADDRESS_MODE, 0x00,
};
static u8 hx8369_seq_vcom[] = {
HX8369_SET_VCOM, 0x3e, 0x3e,
};
static u8 hx8369_seq_gip[] = {
HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
};
static u8 hx8369_seq_power[] = {
HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
};
static u8 hx8369_seq_gamma_curve_related[] = {
HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
};
static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
u8 *txbuf, u16 txlen,
u8 *rxbuf, u16 rxlen)
......@@ -219,6 +287,10 @@ static int hx8357_enter_standby(struct lcd_device *lcdev)
if (ret < 0)
return ret;
/*
* The controller needs 120ms when entering in sleep mode before we can
* send the command to go off sleep mode
*/
msleep(120);
return 0;
......@@ -232,6 +304,10 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
if (ret < 0)
return ret;
/*
* The controller needs 120ms when exiting from sleep mode before we
* can send the command to enter in sleep mode
*/
msleep(120);
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
......@@ -241,18 +317,9 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
return 0;
}
static int hx8357_lcd_init(struct lcd_device *lcdev)
static void hx8357_lcd_reset(struct lcd_device *lcdev)
{
struct hx8357_data *lcd = lcd_get_data(lcdev);
int ret;
/*
* Set the interface selection pins to SPI mode, with three
* wires
*/
gpio_set_value_cansleep(lcd->im_pins[0], 1);
gpio_set_value_cansleep(lcd->im_pins[1], 0);
gpio_set_value_cansleep(lcd->im_pins[2], 1);
/* Reset the screen */
gpio_set_value(lcd->reset, 1);
......@@ -260,7 +327,25 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
gpio_set_value(lcd->reset, 0);
usleep_range(10000, 12000);
gpio_set_value(lcd->reset, 1);
/* The controller needs 120ms to recover from reset */
msleep(120);
}
static int hx8357_lcd_init(struct lcd_device *lcdev)
{
struct hx8357_data *lcd = lcd_get_data(lcdev);
int ret;
/*
* Set the interface selection pins to SPI mode, with three
* wires
*/
if (lcd->use_im_pins) {
gpio_set_value_cansleep(lcd->im_pins[0], 1);
gpio_set_value_cansleep(lcd->im_pins[1], 0);
gpio_set_value_cansleep(lcd->im_pins[2], 1);
}
ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
ARRAY_SIZE(hx8357_seq_power));
......@@ -341,6 +426,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
if (ret < 0)
return ret;
/*
* The controller needs 120ms to fully recover from exiting sleep mode
*/
msleep(120);
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
......@@ -356,6 +444,96 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
return 0;
}
static int hx8369_lcd_init(struct lcd_device *lcdev)
{
int ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
ARRAY_SIZE(hx8369_seq_extension_command));
if (ret < 0)
return ret;
usleep_range(10000, 12000);
ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
ARRAY_SIZE(hx8369_seq_display_related));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
ARRAY_SIZE(hx8369_seq_set_address_mode));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
ARRAY_SIZE(hx8369_seq_vcom));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
ARRAY_SIZE(hx8369_seq_gip));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
ARRAY_SIZE(hx8369_seq_power));
if (ret < 0)
return ret;
ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
if (ret < 0)
return ret;
/*
* The controller needs 120ms to fully recover from exiting sleep mode
*/
msleep(120);
ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
ARRAY_SIZE(hx8369_seq_gamma_curve_related));
if (ret < 0)
return ret;
ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
if (ret < 0)
return ret;
usleep_range(1000, 1200);
ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
ARRAY_SIZE(hx8369_seq_write_CABC_control));
if (ret < 0)
return ret;
usleep_range(10000, 12000);
ret = hx8357_spi_write_array(lcdev,
hx8369_seq_write_CABC_control_setting,
ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev,
hx8369_seq_write_CABC_min_brightness,
ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
if (ret < 0)
return ret;
usleep_range(10000, 12000);
ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
ARRAY_SIZE(hx8369_seq_set_display_brightness));
if (ret < 0)
return ret;
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
if (ret < 0)
return ret;
return 0;
}
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
static int hx8357_set_power(struct lcd_device *lcdev, int power)
......@@ -388,10 +566,24 @@ static struct lcd_ops hx8357_ops = {
.get_power = hx8357_get_power,
};
static const struct of_device_id hx8357_dt_ids[] = {
{
.compatible = "himax,hx8357",
.data = hx8357_lcd_init,
},
{
.compatible = "himax,hx8369",
.data = hx8369_lcd_init,
},
{},
};
MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
static int hx8357_probe(struct spi_device *spi)
{
struct lcd_device *lcdev;
struct hx8357_data *lcd;
const struct of_device_id *match;
int i, ret;
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
......@@ -408,6 +600,10 @@ static int hx8357_probe(struct spi_device *spi)
lcd->spi = spi;
match = of_match_device(hx8357_dt_ids, &spi->dev);
if (!match || !match->data)
return -EINVAL;
lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
if (!gpio_is_valid(lcd->reset)) {
dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
......@@ -424,25 +620,32 @@ static int hx8357_probe(struct spi_device *spi)
return -EINVAL;
}
for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
"im-gpios", i);
if (lcd->im_pins[i] == -EPROBE_DEFER) {
dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
return -EPROBE_DEFER;
}
if (!gpio_is_valid(lcd->im_pins[i])) {
dev_err(&spi->dev, "Missing dt property: im-gpios\n");
return -EINVAL;
}
ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
GPIOF_OUT_INIT_LOW, "im_pins");
if (ret) {
dev_err(&spi->dev, "failed to request gpio %d: %d\n",
lcd->im_pins[i], ret);
return -EINVAL;
if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
lcd->use_im_pins = 1;
for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
"im-gpios", i);
if (lcd->im_pins[i] == -EPROBE_DEFER) {
dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
return -EPROBE_DEFER;
}
if (!gpio_is_valid(lcd->im_pins[i])) {
dev_err(&spi->dev, "Missing dt property: im-gpios\n");
return -EINVAL;
}
ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
GPIOF_OUT_INIT_LOW,
"im_pins");
if (ret) {
dev_err(&spi->dev, "failed to request gpio %d: %d\n",
lcd->im_pins[i], ret);
return -EINVAL;
}
}
} else {
lcd->use_im_pins = 0;
}
lcdev = lcd_device_register("mxsfb", &spi->dev, lcd, &hx8357_ops);
......@@ -452,7 +655,9 @@ static int hx8357_probe(struct spi_device *spi)
}
spi_set_drvdata(spi, lcdev);
ret = hx8357_lcd_init(lcdev);
hx8357_lcd_reset(lcdev);
ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
if (ret) {
dev_err(&spi->dev, "Couldn't initialize panel\n");
goto init_error;
......@@ -475,12 +680,6 @@ static int hx8357_remove(struct spi_device *spi)
return 0;
}
static const struct of_device_id hx8357_dt_ids[] = {
{ .compatible = "himax,hx8357" },
{},
};
MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
static struct spi_driver hx8357_driver = {
.probe = hx8357_probe,
.remove = hx8357_remove,
......
......@@ -246,7 +246,7 @@ static int lp855x_bl_update_status(struct backlight_device *bl)
{
struct lp855x *lp = bl_get_data(bl);
if (bl->props.state & BL_CORE_SUSPENDED)
if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
bl->props.brightness = 0;
if (lp->mode == PWM_BASED) {
......
此差异已折叠。
......@@ -72,6 +72,7 @@ static void efifb_destroy(struct fb_info *info)
if (request_mem_succeeded)
release_mem_region(info->apertures->ranges[0].base,
info->apertures->ranges[0].size);
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
}
......
......@@ -27,6 +27,7 @@
#include <video/exynos_mipi_dsim.h>
#include "exynos_mipi_dsi_regs.h"
#include "exynos_mipi_dsi_lowlevel.h"
void exynos_mipi_dsi_func_reset(struct mipi_dsim_device *dsim)
{
......
......@@ -285,13 +285,8 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info)
rc = -ENODEV;
goto out;
}
if (cmap->start < 0 || (!info->fbops->fb_setcolreg &&
!info->fbops->fb_setcmap)) {
rc = -EINVAL;
goto out1;
}
rc = fb_set_cmap(&umap, info);
out1:
unlock_fb_info(info);
out:
fb_dealloc_cmap(&umap);
......
......@@ -43,8 +43,12 @@
#define FBPIXMAPSIZE (1024 * 8)
static DEFINE_MUTEX(registration_lock);
struct fb_info *registered_fb[FB_MAX] __read_mostly;
EXPORT_SYMBOL(registered_fb);
int num_registered_fb __read_mostly;
EXPORT_SYMBOL(num_registered_fb);
static struct fb_info *get_fb_info(unsigned int idx)
{
......@@ -182,6 +186,7 @@ char* fb_get_buffer_offset(struct fb_info *info, struct fb_pixmap *buf, u32 size
return addr;
}
EXPORT_SYMBOL(fb_get_buffer_offset);
#ifdef CONFIG_LOGO
......@@ -669,6 +674,7 @@ int fb_show_logo(struct fb_info *info, int rotate)
int fb_prepare_logo(struct fb_info *info, int rotate) { return 0; }
int fb_show_logo(struct fb_info *info, int rotate) { return 0; }
#endif /* CONFIG_LOGO */
EXPORT_SYMBOL(fb_show_logo);
static void *fb_seq_start(struct seq_file *m, loff_t *pos)
{
......@@ -909,6 +915,7 @@ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
info->var.vmode &= ~FB_VMODE_YWRAP;
return 0;
}
EXPORT_SYMBOL(fb_pan_display);
static int fb_check_caps(struct fb_info *info, struct fb_var_screeninfo *var,
u32 activate)
......@@ -1042,6 +1049,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
done:
return ret;
}
EXPORT_SYMBOL(fb_set_var);
int
fb_blank(struct fb_info *info, int blank)
......@@ -1073,6 +1081,7 @@ fb_blank(struct fb_info *info, int blank)
return ret;
}
EXPORT_SYMBOL(fb_blank);
static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg)
......@@ -1745,6 +1754,7 @@ register_framebuffer(struct fb_info *fb_info)
return ret;
}
EXPORT_SYMBOL(register_framebuffer);
/**
* unregister_framebuffer - releases a frame buffer device
......@@ -1773,6 +1783,7 @@ unregister_framebuffer(struct fb_info *fb_info)
return ret;
}
EXPORT_SYMBOL(unregister_framebuffer);
/**
* fb_set_suspend - low level driver signals suspend
......@@ -1796,6 +1807,7 @@ void fb_set_suspend(struct fb_info *info, int state)
fb_notifier_call_chain(FB_EVENT_RESUME, &event);
}
}
EXPORT_SYMBOL(fb_set_suspend);
/**
* fbmem_init - init frame buffer subsystem
......@@ -1912,6 +1924,7 @@ int fb_get_options(const char *name, char **option)
return retval;
}
EXPORT_SYMBOL(fb_get_options);
#ifndef MODULE
/**
......@@ -1959,20 +1972,4 @@ static int __init video_setup(char *options)
__setup("video=", video_setup);
#endif
/*
* Visible symbols for modules
*/
EXPORT_SYMBOL(register_framebuffer);
EXPORT_SYMBOL(unregister_framebuffer);
EXPORT_SYMBOL(num_registered_fb);
EXPORT_SYMBOL(registered_fb);
EXPORT_SYMBOL(fb_show_logo);
EXPORT_SYMBOL(fb_set_var);
EXPORT_SYMBOL(fb_blank);
EXPORT_SYMBOL(fb_pan_display);
EXPORT_SYMBOL(fb_get_buffer_offset);
EXPORT_SYMBOL(fb_set_suspend);
EXPORT_SYMBOL(fb_get_options);
MODULE_LICENSE("GPL");
......@@ -2029,10 +2029,9 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm
return -1;
}
minfo = kmalloc(sizeof(*minfo), GFP_KERNEL);
minfo = kzalloc(sizeof(*minfo), GFP_KERNEL);
if (!minfo)
return -1;
memset(minfo, 0, sizeof(*minfo));
minfo->pcidev = pdev;
minfo->dead = 0;
......
......@@ -46,7 +46,6 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
#include <linux/fb.h>
#include <linux/regulator/consumer.h>
#include <video/of_display_timing.h>
......@@ -851,18 +850,11 @@ static int mxsfb_probe(struct platform_device *pdev)
struct mxsfb_info *host;
struct fb_info *fb_info;
struct fb_modelist *modelist;
struct pinctrl *pinctrl;
int ret;
if (of_id)
pdev->id_entry = of_id->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Cannot get memory IO resource\n");
return -ENODEV;
}
fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
if (!fb_info) {
dev_err(&pdev->dev, "Failed to allocate fbdev\n");
......@@ -871,6 +863,7 @@ static int mxsfb_probe(struct platform_device *pdev)
host = to_imxfb_host(fb_info);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->base)) {
ret = PTR_ERR(host->base);
......@@ -882,12 +875,6 @@ static int mxsfb_probe(struct platform_device *pdev)
host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
goto fb_release;
}
host->clk = devm_clk_get(&host->pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
......
......@@ -612,10 +612,11 @@ static void hdmi_display_set_timing(struct omap_dss_device *dssdev,
hdmi.ip_data.cfg.cm = cm;
t = hdmi_get_timings();
if (t != NULL)
if (t != NULL) {
hdmi.ip_data.cfg = *t;
dispc_set_tv_pclk(t->timings.pixel_clock * 1000);
dispc_set_tv_pclk(t->timings.pixel_clock * 1000);
}
mutex_unlock(&hdmi.lock);
}
......
......@@ -285,9 +285,10 @@ static ssize_t manager_alpha_blending_enabled_show(
{
struct omap_overlay_manager_info info;
mgr->get_manager_info(mgr, &info);
if(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER))
return -ENODEV;
WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
mgr->get_manager_info(mgr, &info);
return snprintf(buf, PAGE_SIZE, "%d\n",
info.partial_alpha_enabled);
......@@ -301,7 +302,8 @@ static ssize_t manager_alpha_blending_enabled_store(
bool enable;
int r;
WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
if(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER))
return -ENODEV;
r = strtobool(buf, &enable);
if (r)
......
......@@ -779,16 +779,14 @@ void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
struct omap_video_timings video_timing;
struct hdmi_video_format video_format;
/* HDMI core */
struct hdmi_core_infoframe_avi avi_cfg = ip_data->avi_cfg;
struct hdmi_core_infoframe_avi *avi_cfg = &ip_data->avi_cfg;
struct hdmi_core_video_config v_core_cfg;
struct hdmi_core_packet_enable_repeat repeat_cfg;
struct hdmi_config *cfg = &ip_data->cfg;
hdmi_wp_init(&video_timing, &video_format);
hdmi_core_init(&v_core_cfg,
&avi_cfg,
&repeat_cfg);
hdmi_core_init(&v_core_cfg, avi_cfg, &repeat_cfg);
hdmi_wp_video_init_format(&video_format, &video_timing, cfg);
......@@ -822,24 +820,24 @@ void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
* configure packet
* info frame video see doc CEA861-D page 65
*/
avi_cfg.db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB;
avi_cfg.db1_active_info =
HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF;
avi_cfg.db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO;
avi_cfg.db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0;
avi_cfg.db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO;
avi_cfg.db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO;
avi_cfg.db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME;
avi_cfg.db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO;
avi_cfg.db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601;
avi_cfg.db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT;
avi_cfg.db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO;
avi_cfg.db4_videocode = cfg->cm.code;
avi_cfg.db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO;
avi_cfg.db6_7_line_eoftop = 0;
avi_cfg.db8_9_line_sofbottom = 0;
avi_cfg.db10_11_pixel_eofleft = 0;
avi_cfg.db12_13_pixel_sofright = 0;
avi_cfg->db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB;
avi_cfg->db1_active_info =
HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF;
avi_cfg->db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO;
avi_cfg->db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0;
avi_cfg->db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO;
avi_cfg->db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO;
avi_cfg->db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME;
avi_cfg->db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO;
avi_cfg->db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601;
avi_cfg->db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT;
avi_cfg->db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO;
avi_cfg->db4_videocode = cfg->cm.code;
avi_cfg->db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO;
avi_cfg->db6_7_line_eoftop = 0;
avi_cfg->db8_9_line_sofbottom = 0;
avi_cfg->db10_11_pixel_eofleft = 0;
avi_cfg->db12_13_pixel_sofright = 0;
hdmi_core_aux_infoframe_avi_config(ip_data);
......
......@@ -32,8 +32,8 @@ MODULE_DESCRIPTION("Display Output Switcher Lowlevel Control Abstraction");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Luming Yu <luming.yu@intel.com>");
static ssize_t video_output_show_state(struct device *dev,
struct device_attribute *attr, char *buf)
static ssize_t state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
ssize_t ret_size = 0;
struct output_device *od = to_output_device(dev);
......@@ -42,9 +42,8 @@ static ssize_t video_output_show_state(struct device *dev,
return ret_size;
}
static ssize_t video_output_store_state(struct device *dev,
struct device_attribute *attr,
const char *buf,size_t count)
static ssize_t state_store(struct device *dev, struct device_attribute *attr,
const char *buf,size_t count)
{
char *endp;
struct output_device *od = to_output_device(dev);
......@@ -62,6 +61,7 @@ static ssize_t video_output_store_state(struct device *dev,
}
return count;
}
static DEVICE_ATTR_RW(state);
static void video_output_release(struct device *dev)
{
......@@ -69,16 +69,16 @@ static void video_output_release(struct device *dev)
kfree(od);
}
static struct device_attribute video_output_attributes[] = {
__ATTR(state, 0644, video_output_show_state, video_output_store_state),
__ATTR_NULL,
static struct attribute *video_output_attrs[] = {
&dev_attr_state.attr,
NULL,
};
ATTRIBUTE_GROUPS(video_output);
static struct class video_output_class = {
.name = "video_output",
.dev_release = video_output_release,
.dev_attrs = video_output_attributes,
.dev_groups = video_output_groups,
};
struct output_device *video_output_register(const char *name,
......
......@@ -259,12 +259,12 @@ static int xilinxfb_assign(struct platform_device *pdev,
struct resource *res;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drvdata->regs_phys = res->start;
drvdata->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!drvdata->regs) {
rc = -EADDRNOTAVAIL;
drvdata->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(drvdata->regs)) {
rc = PTR_ERR(drvdata->regs);
goto err_region;
}
drvdata->regs_phys = res->start;
}
/* Allocate the framebuffer memory */
......
......@@ -25,6 +25,7 @@
{ "r8g8b8", 24, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_RGB888 }, \
{ "x8r8g8b8", 32, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_XRGB8888 }, \
{ "a8r8g8b8", 32, {16, 8}, {8, 8}, {0, 8}, {24, 8}, DRM_FORMAT_ARGB8888 }, \
{ "a8b8g8r8", 32, {0, 8}, {8, 8}, {16, 8}, {24, 8}, DRM_FORMAT_ABGR8888 }, \
{ "x2r10g10b10", 32, {20, 10}, {10, 10}, {0, 10}, {0, 0}, DRM_FORMAT_XRGB2101010 }, \
{ "a2r10g10b10", 32, {20, 10}, {10, 10}, {0, 10}, {30, 2}, DRM_FORMAT_ARGB2101010 }, \
}
......
......@@ -23,6 +23,11 @@ enum raster_load_mode {
LOAD_PALETTE,
};
enum da8xx_frame_complete {
DA8XX_FRAME_WAIT,
DA8XX_FRAME_NOWAIT,
};
struct da8xx_lcdc_platform_data {
const char manu_name[10];
void *controller_data;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册