Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 9a95b370 编写于 作者: S Stanislaw Gruszka
浏览文件
操作

iwlegacy: use FH49_ prefix in 4965 code 

Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
上级 53143a18
隐藏空白更改
内联 并排
Showing with 153 addition and 153 deletion
drivers/net/wireless/iwlegacy/4965-mac.c
浏览文件 @ 9a95b370
......@@ -138,22 +138,22 @@ int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
u32 rb_timeout = 0;
if (il->cfg->mod_params->amsdu_size_8K)
rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
else
rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
/* Stop Rx DMA */
il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
/* Reset driver's Rx queue write idx */
il_wr(il, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
/* Tell device where to find RBD circular buffer in DRAM */
il_wr(il, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG,
(u32)(rxq->bd_dma >> 8));
/* Tell device where in DRAM to update its Rx status */
il_wr(il, FH_RSCSR_CHNL0_STTS_WPTR_REG,
il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG,
rxq->rb_stts_dma >> 4);
/* Enable Rx DMA
......@@ -162,13 +162,13 @@ int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
* RB timeout 0x10
* 256 RBDs
*/
il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG,
FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG,
FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
rb_size|
(rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
(rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
(rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
(rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
/* Set interrupt coalescing timer to default (2048 usecs) */
il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF);
......@@ -443,9 +443,9 @@ int il4965_rxq_stop(struct il_priv *il)
{
/* stop Rx DMA */
il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
il_poll_bit(il, FH_MEM_RSSR_RX_STATUS_REG,
FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG,
FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
return 0;
}
......@@ -1180,15 +1180,15 @@ u8 il4965_toggle_tx_ant(struct il_priv *il, u8 ant, u8 valid)
static const char *il4965_get_fh_string(int cmd)
{
switch (cmd) {
IL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG);
IL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG);
IL_CMD(FH_RSCSR_CHNL0_WPTR);
IL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG);
IL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG);
IL_CMD(FH_MEM_RSSR_RX_STATUS_REG);
IL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
IL_CMD(FH_TSSR_TX_STATUS_REG);
IL_CMD(FH_TSSR_TX_ERROR_REG);
IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG);
IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG);
IL_CMD(FH49_RSCSR_CHNL0_WPTR);
IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG);
IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG);
IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG);
IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
IL_CMD(FH49_TSSR_TX_STATUS_REG);
IL_CMD(FH49_TSSR_TX_ERROR_REG);
default:
return "UNKNOWN";
}
......@@ -1202,15 +1202,15 @@ int il4965_dump_fh(struct il_priv *il, char **buf, bool display)
size_t bufsz = 0;
#endif
static const u32 fh_tbl[] = {
FH_RSCSR_CHNL0_STTS_WPTR_REG,
FH_RSCSR_CHNL0_RBDCB_BASE_REG,
FH_RSCSR_CHNL0_WPTR,
FH_MEM_RCSR_CHNL0_CONFIG_REG,
FH_MEM_RSSR_SHARED_CTRL_REG,
FH_MEM_RSSR_RX_STATUS_REG,
FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
FH_TSSR_TX_STATUS_REG,
FH_TSSR_TX_ERROR_REG
FH49_RSCSR_CHNL0_STTS_WPTR_REG,
FH49_RSCSR_CHNL0_RBDCB_BASE_REG,
FH49_RSCSR_CHNL0_WPTR,
FH49_MEM_RCSR_CHNL0_CONFIG_REG,
FH49_MEM_RSSR_SHARED_CTRL_REG,
FH49_MEM_RSSR_RX_STATUS_REG,
FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
FH49_TSSR_TX_STATUS_REG,
FH49_TSSR_TX_ERROR_REG
};
#ifdef CONFIG_IWLEGACY_DEBUG
if (display) {
......@@ -2010,7 +2010,7 @@ int il4965_txq_ctx_alloc(struct il_priv *il)
il4965_txq_set_sched(il, 0);
/* Tell NIC where to find the "keep warm" buffer */
il_wr(il, FH_KW_MEM_ADDR_REG, il->kw.dma >> 4);
il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);
spin_unlock_irqrestore(&il->lock, flags);
......@@ -2049,7 +2049,7 @@ void il4965_txq_ctx_reset(struct il_priv *il)
il4965_txq_set_sched(il, 0);
/* Tell NIC where to find the "keep warm" buffer */
il_wr(il, FH_KW_MEM_ADDR_REG, il->kw.dma >> 4);
il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);
spin_unlock_irqrestore(&il->lock, flags);
......@@ -2078,14 +2078,14 @@ void il4965_txq_ctx_stop(struct il_priv *il)
/* Stop each Tx DMA channel, and wait for it to be idle */
for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) {
il_wr(il,
FH_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0);
if (il_poll_bit(il, FH_TSSR_TX_STATUS_REG,
FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0);
if (il_poll_bit(il, FH49_TSSR_TX_STATUS_REG,
FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
1000))
IL_ERR("Failing on timeout while stopping"
" DMA channel %d [0x%08x]", ch,
il_rd(il,
FH_TSSR_TX_STATUS_REG));
FH49_TSSR_TX_STATUS_REG));
}
spin_unlock_irqrestore(&il->lock, flags);
......@@ -3743,7 +3743,7 @@ int il4965_hw_tx_queue_init(struct il_priv *il,
int txq_id = txq->q.id;
/* Circular buffer (TFD queue in DRAM) physical base address */
il_wr(il, FH_MEM_CBBC_QUEUE(txq_id),
il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id),
txq->q.dma_addr >> 8);
return 0;
......@@ -4262,7 +4262,7 @@ static void il4965_irq_tasklet(struct il_priv *il)
if (inta & ~(il->inta_mask)) {
IL_WARN("Disabled INTA bits 0x%08x were pending\n",
inta & ~il->inta_mask);
IL_WARN(" with FH_INT = 0x%08x\n", inta_fh);
IL_WARN(" with FH49_INT = 0x%08x\n", inta_fh);
}
/* Re-enable all interrupts */
......@@ -4798,7 +4798,7 @@ static const char * const desc_lookup_text[] = {
"HW_ERROR_TEMPERATURE",
"ILLEGAL_CHAN_FREQ",
"VCC_NOT_STBL",
"FH_ERROR",
"FH49_ERROR",
"NMI_INTERRUPT_HOST",
"NMI_INTERRUPT_ACTION_PT",
"NMI_INTERRUPT_UNKNOWN",
......@@ -4969,14 +4969,14 @@ static int il4965_alive_notify(struct il_priv *il)
/* Enable DMA channel */
for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++)
il_wr(il,
FH_TCSR_CHNL_TX_CONFIG_REG(chan),
FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
FH49_TCSR_CHNL_TX_CONFIG_REG(chan),
FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
/* Update FH chicken bits */
reg_val = il_rd(il, FH_TX_CHICKEN_BITS_REG);
il_wr(il, FH_TX_CHICKEN_BITS_REG,
reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG);
il_wr(il, FH49_TX_CHICKEN_BITS_REG,
reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
/* Disable chain mode for all queues */
il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0);
......
drivers/net/wireless/iwlegacy/4965.c
浏览文件 @ 9a95b370
......@@ -630,7 +630,7 @@ static int il4965_hw_set_hw_params(struct il_priv *il)
il->hw_params.max_bsm_size = BSM_SRAM_SIZE;
il->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
il->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR;
il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant);
il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant);
......
drivers/net/wireless/iwlegacy/common.h
浏览文件 @ 9a95b370
......@@ -2835,7 +2835,7 @@ struct il_tfd_tb {
* contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes
*
* Driver must indicate the physical address of the base of each
* circular buffer via the FH_MEM_CBBC_QUEUE registers.
* circular buffer via the FH49_MEM_CBBC_QUEUE registers.
*
* Each TFD contains pointer/size information for up to 20 data buffers
* in host DRAM. These buffers collectively contain the (one) frame described
......
drivers/net/wireless/iwlegacy/iwl-fh.h
浏览文件 @ 9a95b370
......@@ -71,8 +71,8 @@
* This I/O area is directly read/writable by driver (e.g. Linux uses writel())
* Addresses are offsets from device's PCI hardware base address.
*/
#define FH_MEM_LOWER_BOUND (0x1000)
#define FH_MEM_UPPER_BOUND (0x2000)
#define FH49_MEM_LOWER_BOUND (0x1000)
#define FH49_MEM_UPPER_BOUND (0x2000)
/**
* Keep-Warm (KW) buffer base address.
......@@ -83,7 +83,7 @@
* from going into a power-savings mode that would cause higher DRAM latency,
* and possible data over/under-runs, before all Tx/Rx is complete.
*
* Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4)
* Driver loads FH49_KW_MEM_ADDR_REG with the physical address (bits 35:4)
* of the buffer, which must be 4K aligned. Once this is set up, the 4965
* automatically invokes keep-warm accesses when normal accesses might not
* be sufficient to maintain fast DRAM response.
......@@ -91,7 +91,7 @@
* Bit fields:
* 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned
*/
#define FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C)
#define FH49_KW_MEM_ADDR_REG (FH49_MEM_LOWER_BOUND + 0x97C)
/**
......@@ -106,11 +106,11 @@
* Bit fields in each pointer register:
* 27-0: TFD CB physical base address [35:8], must be 256-byte aligned
*/
#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0)
#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10)
#define FH49_MEM_CBBC_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x9D0)
#define FH49_MEM_CBBC_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xA10)
/* Find TFD CB base pointer for given queue (range 0-15). */
#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4)
#define FH49_MEM_CBBC_QUEUE(x) (FH49_MEM_CBBC_LOWER_BOUND + (x) * 0x4)
/**
......@@ -132,18 +132,18 @@
* Each entry (1 dword) points to a receive buffer (RB) of consistent size
* (typically 4K, although 8K or 16K are also selectable by driver).
* Driver sets up RB size and number of RBDs in the CB via Rx config
* register FH_MEM_RCSR_CHNL0_CONFIG_REG.
* register FH49_MEM_RCSR_CHNL0_CONFIG_REG.
*
* Bit fields within one RBD:
* 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned
*
* Driver sets physical address [35:8] of base of RBD circular buffer
* into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0].
* into FH49_RSCSR_CHNL0_RBDCB_BASE_REG [27:0].
*
* 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers
* (RBs) have been filled, via a "write pointer", actually the idx of
* the RB's corresponding RBD within the circular buffer. Driver sets
* physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0].
* physical address [35:4] into FH49_RSCSR_CHNL0_STTS_WPTR_REG [31:0].
*
* Bit fields in lower dword of Rx status buffer (upper dword not used
* by driver; see struct il4965_shared, val0):
......@@ -154,7 +154,7 @@
* As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must
* enter pointers to these RBs into contiguous RBD circular buffer entries,
* and update the 4965's "write" idx register,
* FH_RSCSR_CHNL0_RBDCB_WPTR_REG.
* FH49_RSCSR_CHNL0_RBDCB_WPTR_REG.
*
* This "write" idx corresponds to the *next* RBD that the driver will make
* available, i.e. one RBD past the tail of the ready-to-fill RBDs within
......@@ -182,23 +182,23 @@
* and "read" idxes; that is, make sure that there are no more than 254
* buffers waiting to be filled.
*/
#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0)
#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00)
#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND)
#define FH49_MEM_RSCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xBC0)
#define FH49_MEM_RSCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xC00)
#define FH49_MEM_RSCSR_CHNL0 (FH49_MEM_RSCSR_LOWER_BOUND)
/**
* Physical base address of 8-byte Rx Status buffer.
* Bit fields:
* 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned.
*/
#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0)
#define FH49_RSCSR_CHNL0_STTS_WPTR_REG (FH49_MEM_RSCSR_CHNL0)
/**
* Physical base address of Rx Buffer Descriptor Circular Buffer.
* Bit fields:
* 27-0: RBD CD physical base address [35:8], must be 256-byte aligned.
*/
#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004)
#define FH49_RSCSR_CHNL0_RBDCB_BASE_REG (FH49_MEM_RSCSR_CHNL0 + 0x004)
/**
* Rx write pointer (idx, really!).
......@@ -206,20 +206,20 @@
* 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1.
* NOTE: For 256-entry circular buffer, use only bits [7:0].
*/
#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008)
#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG)
#define FH49_RSCSR_CHNL0_RBDCB_WPTR_REG (FH49_MEM_RSCSR_CHNL0 + 0x008)
#define FH49_RSCSR_CHNL0_WPTR (FH49_RSCSR_CHNL0_RBDCB_WPTR_REG)
/**
* Rx Config/Status Registers (RCSR)
* Rx Config Reg for channel 0 (only channel used)
*
* Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for
* Driver must initialize FH49_MEM_RCSR_CHNL0_CONFIG_REG as follows for
* normal operation (see bit fields).
*
* Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA.
* Driver should poll FH_MEM_RSSR_RX_STATUS_REG for
* FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing.
* Clearing FH49_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA.
* Driver should poll FH49_MEM_RSSR_RX_STATUS_REG for
* FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing.
*
* Bit fields:
* 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame,
......@@ -236,67 +236,67 @@
* typical value 0x10 (about 1/2 msec)
* 3- 0: reserved
*/
#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00)
#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0)
#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND)
#define FH49_MEM_RCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xC00)
#define FH49_MEM_RCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xCC0)
#define FH49_MEM_RCSR_CHNL0 (FH49_MEM_RCSR_LOWER_BOUND)
#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0)
#define FH49_MEM_RCSR_CHNL0_CONFIG_REG (FH49_MEM_RCSR_CHNL0)
#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */
#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */
#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */
#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */
#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/
#define FH49_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */
#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */
#define FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */
#define FH49_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */
#define FH49_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
#define FH49_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/
#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20)
#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4)
#define FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20)
#define FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4)
#define RX_RB_TIMEOUT (0x10)
#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000)
#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000)
#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000)
#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000)
#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000)
#define FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000)
#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000)
#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000)
#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000)
#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000)
#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000)
#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000)
#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000)
#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000)
#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004)
#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000)
#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000)
#define FH49_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004)
#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000)
#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000)
/**
* Rx Shared Status Registers (RSSR)
*
* After stopping Rx DMA channel (writing 0 to
* FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll
* FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle.
* FH49_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll
* FH49_MEM_RSSR_RX_STATUS_REG until Rx channel is idle.
*
* Bit fields:
* 24: 1 = Channel 0 is idle
*
* FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
* FH49_MEM_RSSR_SHARED_CTRL_REG and FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
* contain default values that should not be altered by the driver.
*/
#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40)
#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00)
#define FH49_MEM_RSSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xC40)
#define FH49_MEM_RSSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xD00)
#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND)
#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004)
#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\
(FH_MEM_RSSR_LOWER_BOUND + 0x008)
#define FH49_MEM_RSSR_SHARED_CTRL_REG (FH49_MEM_RSSR_LOWER_BOUND)
#define FH49_MEM_RSSR_RX_STATUS_REG (FH49_MEM_RSSR_LOWER_BOUND + 0x004)
#define FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\
(FH49_MEM_RSSR_LOWER_BOUND + 0x008)
#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
#define FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28
#define FH49_MEM_TFDIB_REG1_ADDR_BITSHIFT 28
/* TFDB Area - TFDs buffer table */
#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF)
#define FH_TFDIB_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x900)
#define FH_TFDIB_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x958)
#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl))
#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4)
#define FH49_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF)
#define FH49_TFDIB_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x900)
#define FH49_TFDIB_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0x958)
#define FH49_TFDIB_CTRL0_REG(_chnl) (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl))
#define FH49_TFDIB_CTRL1_REG(_chnl) (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4)
/**
* Transmit DMA Channel Control/Status Registers (TCSR)
......@@ -306,10 +306,10 @@
* which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes.
*
* To use a Tx DMA channel, driver must initialize its
* FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with:
* FH49_TCSR_CHNL_TX_CONFIG_REG(chnl) with:
*
* FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
* FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL
* FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
* FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL
*
* All other bits should be 0.
*
......@@ -320,62 +320,62 @@
* 3: Enable internal DMA requests (1, normal operation), disable (0)
* 2- 0: Reserved, set to "0"
*/
#define FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00)
#define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60)
#define FH49_TCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xD00)
#define FH49_TCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xE60)
/* Find Control/Status reg for given Tx DMA/FIFO channel */
#define FH49_TCSR_CHNL_NUM (7)
#define FH50_TCSR_CHNL_NUM (8)
/* TCSR: tx_config register values */
#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \
(FH_TCSR_LOWER_BOUND + 0x20 * (_chnl))
#define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \
(FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4)
#define FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \
(FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8)
#define FH49_TCSR_CHNL_TX_CONFIG_REG(_chnl) \
(FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl))
#define FH49_TCSR_CHNL_TX_CREDIT_REG(_chnl) \
(FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4)
#define FH49_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \
(FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8)
#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000)
#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001)
#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001)
#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000)
#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008)
#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008)
#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000)
#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000)
#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000)
#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000)
#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000)
#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000)
#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000)
#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000)
#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000)
#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000)
#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000)
#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000)
#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003)
#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000)
#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000)
#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003)
#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20)
#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12)
#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20)
#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12)
/**
* Tx Shared Status Registers (TSSR)
*
* After stopping Tx DMA channel (writing 0 to
* FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll
* FH_TSSR_TX_STATUS_REG until selected Tx channel is idle
* FH49_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll
* FH49_TSSR_TX_STATUS_REG until selected Tx channel is idle
* (channel's buffers empty | no pending requests).
*
* Bit fields:
* 31-24: 1 = Channel buffers empty (channel 7:0)
* 23-16: 1 = No pending requests (channel 7:0)
*/
#define FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0)
#define FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0)
#define FH49_TSSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xEA0)
#define FH49_TSSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xEC0)
#define FH_TSSR_TX_STATUS_REG (FH_TSSR_LOWER_BOUND + 0x010)
#define FH49_TSSR_TX_STATUS_REG (FH49_TSSR_LOWER_BOUND + 0x010)
/**
* Bit fields for TSSR(Tx Shared Status & Control) error status register:
......@@ -394,22 +394,22 @@
* synchronized to the TxFIFO status
* uCode/driver must write "1" in order to clear this flag
*/
#define FH_TSSR_TX_ERROR_REG (FH_TSSR_LOWER_BOUND + 0x018)
#define FH49_TSSR_TX_ERROR_REG (FH49_TSSR_LOWER_BOUND + 0x018)
#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16)
#define FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16)
/* Tx service channels */
#define FH_SRVC_CHNL (9)
#define FH_SRVC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9C8)
#define FH_SRVC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0)
#define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \
(FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4)
#define FH49_SRVC_CHNL (9)
#define FH49_SRVC_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x9C8)
#define FH49_SRVC_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0x9D0)
#define FH49_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \
(FH49_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4)
#define FH_TX_CHICKEN_BITS_REG (FH_MEM_LOWER_BOUND + 0xE98)
#define FH49_TX_CHICKEN_BITS_REG (FH49_MEM_LOWER_BOUND + 0xE98)
/* Instruct FH to increment the retry count of a packet when
* it is brought from the memory to TX-FIFO
*/
#define FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002)
#define FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002)
/* Keep Warm Size */
#define IL_KW_SIZE 0x1000 /* 4k */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或