gpio: document how to make combined GPIO+irqchip drivers

Write a few words on how GPIO drivers supplying an irqchip should
be written.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Documentation/gpio/driver.txt

@@ -62,6 +62,37 @@ Any debugfs dump method should normally ignore signals which haven't been
 requested as GPIOs. They can use gpiochip_is_requested(), which returns either
 NULL or the label associated with that GPIO when it was requested.
 
+
+GPIO drivers providing IRQs
+---------------------------
+It is custom that GPIO drivers (GPIO chips) are also providing interrupts,
+most often cascaded off a parent interrupt controller, and in some special
+cases the GPIO logic is melded with a SoC's primary interrupt controller.
+
+The IRQ portions of the GPIO block are implemented using an irqchip, using
+the header <linux/irq.h>. So basically such a driver is utilizing two sub-
+systems simultaneously: gpio and irq.
+
+It is legal for any IRQ consumer to request an IRQ from any irqchip no matter
+if that is a combined GPIO+IRQ driver. The basic premise is that gpio_chip and
+irq_chip are orthogonal, and offering their services independent of each
+other.
+
+gpiod_to_irq() is just a convenience function to figure out the IRQ for a
+certain GPIO line and should not be relied upon to have been called before
+the IRQ is used.
+
+So always prepare the hardware and make it ready for action in respective
+callbacks from the GPIO and irqchip APIs. Do not rely on gpiod_to_irq() having
+been called first.
+
+This orthogonality leads to ambiguities that we need to solve: if there is
+competition inside the subsystem which side is using the resource (a certain
+GPIO line and register for example) it needs to deny certain operations and
+keep track of usage inside of the gpiolib subsystem. This is why the API
+below exists.
+
+
 Locking IRQ usage
 -----------------
 Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
@@ -73,3 +104,7 @@ This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
 is released:
 
 	void gpiod_unlock_as_irq(struct gpio_desc *desc)
+
+When implementing an irqchip inside a GPIO driver, these two functions should
+typically be called in the .startup() and .shutdown() callbacks from the
+irqchip.