提交 994c0e99 编写于 作者: L Linus Torvalds

Merge branch 'next/soc' of git://git.linaro.org/people/arnd/arm-soc

* 'next/soc' of git://git.linaro.org/people/arnd/arm-soc: (21 commits)
  MAINTAINERS: add ARM/FREESCALE IMX6 entry
  arm/imx: merge i.MX3 and i.MX6
  arm/imx6q: add suspend/resume support
  arm/imx6q: add device tree machine support
  arm/imx6q: add smp and cpu hotplug support
  arm/imx6q: add core drivers clock, gpc, mmdc and src
  arm/imx: add gic_handle_irq function
  arm/imx6q: add core definitions and low-level debug uart
  arm/imx6q: add device tree source
  ARM: highbank: add suspend support
  ARM: highbank: Add cpu hotplug support
  ARM: highbank: add SMP support
  MAINTAINERS: add Calxeda Highbank ARM platform
  ARM: add Highbank core platform support
  ARM: highbank: add devicetree source
  ARM: l2x0: add empty l2x0_of_init
  picoxcell: add a definition of VMALLOC_END
  picoxcell: remove custom ioremap implementation
  picoxcell: add the DTS for the PC7302 board
  picoxcell: add the DTS for pc3x2 and pc3x3 devices
  ...

Fix up trivial conflicts in arch/arm/Kconfig, and some more header file
conflicts in arch/arm/mach-omap2/board-generic.c (as per an ealier merge
by Arnd).
Calxeda Highbank Platforms Device Tree Bindings
-----------------------------------------------
Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
properties.
Required root node properties:
- compatible = "calxeda,highbank";
Freescale i.MX Platforms Device Tree Bindings
-----------------------------------------------
i.MX51 Babbage Board i.MX51 Babbage Board
Required root node properties: Required root node properties:
- compatible = "fsl,imx51-babbage", "fsl,imx51"; - compatible = "fsl,imx51-babbage", "fsl,imx51";
...@@ -17,3 +20,7 @@ Required root node properties: ...@@ -17,3 +20,7 @@ Required root node properties:
i.MX53 Smart Mobile Reference Design Board i.MX53 Smart Mobile Reference Design Board
Required root node properties: Required root node properties:
- compatible = "fsl,imx53-smd", "fsl,imx53"; - compatible = "fsl,imx53-smd", "fsl,imx53";
i.MX6 Quad SABRE Automotive Board
Required root node properties:
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
Picochip picoXcell device tree bindings.
========================================
Required root node properties:
- compatible:
- "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
- "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
- "picochip,pc3x3" : picoXcell PC3X3 device based board.
- "picochip,pc3x2" : picoXcell PC3X2 device based board.
Timers required properties:
- compatible = "picochip,pc3x2-timer"
- interrupts : The single IRQ line for the timer.
- clock-freq : The frequency in HZ of the timer.
- reg : The register bank for the timer.
Note: two timers are required - one for the scheduler clock and one for the
event tick/NOHZ.
VIC required properties:
- compatible = "arm,pl192-vic".
- interrupt-controller.
- reg : The register bank for the device.
- #interrupt-cells : Must be 1.
...@@ -692,6 +692,12 @@ F: drivers/mtd/nand/bcm_umi_nand.c ...@@ -692,6 +692,12 @@ F: drivers/mtd/nand/bcm_umi_nand.c
F: drivers/mtd/nand/bcm_umi_bch.c F: drivers/mtd/nand/bcm_umi_bch.c
F: drivers/mtd/nand/nand_bcm_umi.h F: drivers/mtd/nand/nand_bcm_umi.h
ARM/CALXEDA HIGHBANK ARCHITECTURE
M: Rob Herring <rob.herring@calxeda.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-highbank/
ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
M: Anton Vorontsov <avorontsov@mvista.com> M: Anton Vorontsov <avorontsov@mvista.com>
S: Maintained S: Maintained
...@@ -791,6 +797,13 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) ...@@ -791,6 +797,13 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained S: Maintained
F: arch/arm/mach-mx5/ F: arch/arm/mach-mx5/
ARM/FREESCALE IMX6
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-imx/*imx6*
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org> M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......
...@@ -334,6 +334,20 @@ config ARCH_BCMRING ...@@ -334,6 +334,20 @@ config ARCH_BCMRING
help help
Support for Broadcom's BCMRing platform. Support for Broadcom's BCMRing platform.
config ARCH_HIGHBANK
bool "Calxeda Highbank-based"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select USE_OF
help
Support for the Calxeda Highbank SoC based boards.
config ARCH_CLPS711X config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based" bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T select CPU_ARM720T
...@@ -623,6 +637,24 @@ config ARCH_TEGRA ...@@ -623,6 +637,24 @@ config ARCH_TEGRA
This enables support for NVIDIA Tegra based systems (Tegra APX, This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series). Tegra 6xx and Tegra 2 series).
config ARCH_PICOXCELL
bool "Picochip picoXcell"
select ARCH_REQUIRE_GPIOLIB
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select CPU_V6K
select DW_APB_TIMER
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_SCHED_CLOCK
select HAVE_TCM
select NO_IOPORT
select USE_OF
help
This enables support for systems based on the Picochip picoXcell
family of Femtocell devices. The picoxcell support requires device tree
for all boards.
config ARCH_PNX4008 config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile" bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T select CPU_ARM926T
...@@ -1398,7 +1430,7 @@ config SMP ...@@ -1398,7 +1430,7 @@ config SMP
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
depends on MMU depends on MMU
select USE_GENERIC_SMP_HELPERS select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
......
...@@ -128,6 +128,13 @@ choice ...@@ -128,6 +128,13 @@ choice
Say Y here if you want the debug print routines to direct Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices. their output to the second serial port on these devices.
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
help
Say Y here if you want the debug print routines to direct
their output to the UART on Highbank based devices.
config DEBUG_IMX1_UART config DEBUG_IMX1_UART
bool "i.MX1 Debug UART" bool "i.MX1 Debug UART"
depends on SOC_IMX1 depends on SOC_IMX1
...@@ -184,6 +191,13 @@ choice ...@@ -184,6 +191,13 @@ choice
Say Y here if you want kernel low-level debugging support Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53. on i.MX50 or i.MX53.
config DEBUG_IMX6Q_UART
bool "i.MX6Q Debug UART"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
on i.MX6Q.
config DEBUG_S3C_UART0 config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug" bool "Use S3C UART 0 for low-level debug"
......
...@@ -144,6 +144,7 @@ machine-$(CONFIG_ARCH_EBSA110) := ebsa110 ...@@ -144,6 +144,7 @@ machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini machine-$(CONFIG_ARCH_GEMINI) := gemini
machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_HIGHBANK) := highbank
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_IOP13XX) := iop13xx machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x machine-$(CONFIG_ARCH_IOP32X) := iop32x
...@@ -158,7 +159,7 @@ machine-$(CONFIG_ARCH_MMP) := mmp ...@@ -158,7 +159,7 @@ machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
machine-$(CONFIG_ARCH_MX3) := imx machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NETX) := netx
...@@ -168,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP2) := omap2 ...@@ -168,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP2) := omap2
machine-$(CONFIG_ARCH_OMAP3) := omap2 machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2 machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_PXA) := pxa
......
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
/* First 4KB has pen for secondary cores. */
/memreserve/ 0x00000000 0x0001000;
/ {
model = "Calxeda Highbank";
compatible = "calxeda,highbank";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@2 {
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
cpu@3 {
compatible = "arm,cortex-a9";
reg = <3>;
next-level-cache = <&L2>;
};
};
memory {
name = "memory";
device_type = "memory";
reg = <0x00000000 0xff900000>;
};
chosen {
bootargs = "console=ttyAMA0";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
timer@fff10600 {
compatible = "arm,smp-twd";
reg = <0xfff10600 0x20>;
interrupts = <1 13 0xf04>;
};
watchdog@fff10620 {
compatible = "arm,cortex-a9-wdt";
reg = <0xfff10620 0x20>;
interrupts = <1 14 0xf04>;
};
intc: interrupt-controller@fff11000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#size-cells = <0>;
#address-cells = <1>;
interrupt-controller;
interrupt-parent;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xfff12000 0x1000>;
interrupts = <0 70 4>;
cache-unified;
cache-level = <2>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
};
sata@ffe08000 {
compatible = "calxeda,hb-ahci";
reg = <0xffe08000 0x10000>;
interrupts = <0 83 4>;
};
sdhci@ffe0e000 {
compatible = "calxeda,hb-sdhci";
reg = <0xffe0e000 0x1000>;
interrupts = <0 90 4>;
};
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
interrupts = <0 7 4>;
};
gpioe: gpio@fff30000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff30000 0x1000>;
interrupts = <0 14 4>;
};
gpiof: gpio@fff31000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff31000 0x1000>;
interrupts = <0 15 4>;
};
gpiog: gpio@fff32000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff32000 0x1000>;
interrupts = <0 16 4>;
};
gpioh: gpio@fff33000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff33000 0x1000>;
interrupts = <0 17 4>;
};
timer {
compatible = "arm,sp804", "arm,primecell";
reg = <0xfff34000 0x1000>;
interrupts = <0 18 4>;
};
rtc@fff35000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0xfff35000 0x1000>;
interrupts = <0 19 4>;
};
serial@fff36000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xfff36000 0x1000>;
interrupts = <0 20 4>;
};
smic@fff3a000 {
compatible = "ipmi-smic";
device_type = "ipmi";
reg = <0xfff3a000 0x1000>;
interrupts = <0 24 4>;
reg-size = <4>;
reg-spacing = <4>;
};
sregs@fff3c000 {
compatible = "calxeda,hb-sregs";
reg = <0xfff3c000 0x1000>;
};
dma@fff3d000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xfff3d000 0x1000>;
interrupts = <0 92 4>;
};
};
};
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx6q.dtsi"
/ {
model = "Freescale i.MX6 Quad SABRE Automotive Board";
compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
chosen {
bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
};
memory {
reg = <0x10000000 0x80000000>;
};
soc {
aips-bus@02100000 { /* AIPS2 */
enet@02188000 {
phy-mode = "rgmii";
local-mac-address = [00 04 9F 01 1B 61];
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
fsl,card-wired;
status = "okay";
};
uart3: uart@021f0000 { /* UART4 */
status = "okay";
};
};
};
leds {
compatible = "gpio-leds";
debug-led {
label = "Heartbeat";
gpios = <&gpio2 25 0>; /* GPIO3_25 */
linux,default-trigger = "heartbeat";
};
};
};
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@2 {
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
cpu@3 {
compatible = "arm,cortex-a9";
reg = <3>;
next-level-cache = <&L2>;
};
};
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
timer@00a00600 {
compatible = "arm,smp-twd";
reg = <0x00a00600 0x100>;
interrupts = <1 13 0xf4>;
};
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <0 92 0x04>;
cache-unified;
cache-level = <2>;
};
aips-bus@02000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
spdif@02004000 {
reg = <0x02004000 0x4000>;
interrupts = <0 52 0x04>;
};
ecspi@02008000 { /* eCSPI1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 0x04>;
status = "disabled";
};
ecspi@0200c000 { /* eCSPI2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 0x04>;
status = "disabled";
};
ecspi@02010000 { /* eCSPI3 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 0x04>;
status = "disabled";
};
ecspi@02014000 { /* eCSPI4 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 0x04>;
status = "disabled";
};
ecspi@02018000 { /* eCSPI5 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 0x04>;
status = "disabled";
};
uart0: uart@02020000 { /* UART1 */
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
status = "disabled";
};
esai@02024000 {
reg = <0x02024000 0x4000>;
interrupts = <0 51 0x04>;
};
ssi@02028000 { /* SSI1 */
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
};
ssi@0202c000 { /* SSI2 */
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
};
ssi@02030000 { /* SSI3 */
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
};
asrc@02034000 {
reg = <0x02034000 0x4000>;
interrupts = <0 50 0x04>;
};
spba@0203c000 {
reg = <0x0203c000 0x4000>;
};
};
vpu@02040000 {
reg = <0x02040000 0x3c000>;
interrupts = <0 3 0x04 0 12 0x04>;
};
aipstz@0207c000 { /* AIPSTZ1 */
reg = <0x0207c000 0x4000>;
};
pwm@02080000 { /* PWM1 */
reg = <0x02080000 0x4000>;
interrupts = <0 83 0x04>;
};
pwm@02084000 { /* PWM2 */
reg = <0x02084000 0x4000>;
interrupts = <0 84 0x04>;
};
pwm@02088000 { /* PWM3 */
reg = <0x02088000 0x4000>;
interrupts = <0 85 0x04>;
};
pwm@0208c000 { /* PWM4 */
reg = <0x0208c000 0x4000>;
interrupts = <0 86 0x04>;
};
flexcan@02090000 { /* CAN1 */
reg = <0x02090000 0x4000>;
interrupts = <0 110 0x04>;
};
flexcan@02094000 { /* CAN2 */
reg = <0x02094000 0x4000>;
interrupts = <0 111 0x04>;
};
gpt@02098000 {
compatible = "fsl,imx6q-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 0x04>;
};
gpio0: gpio@0209c000 { /* GPIO1 */
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <0 66 0x04 0 67 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio1: gpio@020a0000 { /* GPIO2 */
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <0 68 0x04 0 69 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio2: gpio@020a4000 { /* GPIO3 */
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <0 70 0x04 0 71 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio3: gpio@020a8000 { /* GPIO4 */
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <0 72 0x04 0 73 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio4: gpio@020ac000 { /* GPIO5 */
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <0 74 0x04 0 75 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio5: gpio@020b0000 { /* GPIO6 */
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <0 76 0x04 0 77 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio6: gpio@020b4000 { /* GPIO7 */
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020b4000 0x4000>;
interrupts = <0 78 0x04 0 79 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
kpp@020b8000 {
reg = <0x020b8000 0x4000>;
interrupts = <0 82 0x04>;
};
wdog@020bc000 { /* WDOG1 */
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 0x04>;
status = "disabled";
};
wdog@020c0000 { /* WDOG2 */
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 0x04>;
status = "disabled";
};
ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
};
anatop@020c8000 {
compatible = "fsl,imx6q-anatop";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
};
usbphy@020c9000 { /* USBPHY1 */
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
};
usbphy@020ca000 { /* USBPHY2 */
reg = <0x020ca000 0x1000>;
interrupts = <0 45 0x04>;
};
snvs@020cc000 {
reg = <0x020cc000 0x4000>;
interrupts = <0 19 0x04 0 20 0x04>;
};
epit@020d0000 { /* EPIT1 */
reg = <0x020d0000 0x4000>;
interrupts = <0 56 0x04>;
};
epit@020d4000 { /* EPIT2 */
reg = <0x020d4000 0x4000>;
interrupts = <0 57 0x04>;
};
src@020d8000 {
compatible = "fsl,imx6q-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 0x04 0 96 0x04>;
};
gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <0 89 0x04 0 90 0x04>;
};
iomuxc@020e0000 {
reg = <0x020e0000 0x4000>;
};
dcic@020e4000 { /* DCIC1 */
reg = <0x020e4000 0x4000>;
interrupts = <0 124 0x04>;
};
dcic@020e8000 { /* DCIC2 */
reg = <0x020e8000 0x4000>;
interrupts = <0 125 0x04>;
};
sdma@020ec000 {
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 0x04>;
};
};
aips-bus@02100000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
caam@02100000 {
reg = <0x02100000 0x40000>;
interrupts = <0 105 0x04 0 106 0x04>;
};
aipstz@0217c000 { /* AIPSTZ2 */
reg = <0x0217c000 0x4000>;
};
enet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
status = "disabled";
};
mlb@0218c000 {
reg = <0x0218c000 0x4000>;
interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
};
usdhc@02190000 { /* uSDHC1 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 0x04>;
status = "disabled";
};
usdhc@02194000 { /* uSDHC2 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 0x04>;
status = "disabled";
};
usdhc@02198000 { /* uSDHC3 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 0x04>;
status = "disabled";
};
usdhc@0219c000 { /* uSDHC4 */
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 0x04>;
status = "disabled";
};
i2c@021a0000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 0x04>;
status = "disabled";
};
i2c@021a4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 0x04>;
status = "disabled";
};
i2c@021a8000 { /* I2C3 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 0x04>;
status = "disabled";
};
romcp@021ac000 {
reg = <0x021ac000 0x4000>;
};
mmdc@021b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
mmdc@021b4000 { /* MMDC1 */
reg = <0x021b4000 0x4000>;
};
weim@021b8000 {
reg = <0x021b8000 0x4000>;
interrupts = <0 14 0x04>;
};
ocotp@021bc000 {
reg = <0x021bc000 0x4000>;
};
ocotp@021c0000 {
reg = <0x021c0000 0x4000>;
interrupts = <0 21 0x04>;
};
tzasc@021d0000 { /* TZASC1 */
reg = <0x021d0000 0x4000>;
interrupts = <0 108 0x04>;
};
tzasc@021d4000 { /* TZASC2 */
reg = <0x021d4000 0x4000>;
interrupts = <0 109 0x04>;
};
audmux@021d8000 {
reg = <0x021d8000 0x4000>;
};
mipi@021dc000 { /* MIPI-CSI */
reg = <0x021dc000 0x4000>;
};
mipi@021e0000 { /* MIPI-DSI */
reg = <0x021e0000 0x4000>;
};
vdoa@021e4000 {
reg = <0x021e4000 0x4000>;
interrupts = <0 18 0x04>;
};
uart1: uart@021e8000 { /* UART2 */
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
status = "disabled";
};
uart2: uart@021ec000 { /* UART3 */
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
status = "disabled";
};
uart3: uart@021f0000 { /* UART4 */
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
status = "disabled";
};
uart4: uart@021f4000 { /* UART5 */
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;
status = "disabled";
};
};
};
};
/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/include/ "skeleton.dtsi"
/ {
model = "Picochip picoXcell PC3X2";
compatible = "picochip,pc3x2";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,1176jz-s";
clock-frequency = <400000000>;
reg = <0>;
d-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-line-size = <32>;
i-cache-size = <32768>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
pclk: clock@0 {
compatible = "fixed-clock";
clock-outputs = "bus", "pclk";
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
};
paxi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x80000000 0x400000>;
emac: gem@30000 {
compatible = "cadence,gem";
reg = <0x30000 0x10000>;
interrupts = <31>;
};
dmac1: dmac@40000 {
compatible = "snps,dw-dmac";
reg = <0x40000 0x10000>;
interrupts = <25>;
};
dmac2: dmac@50000 {
compatible = "snps,dw-dmac";
reg = <0x50000 0x10000>;
interrupts = <26>;
};
vic0: interrupt-controller@60000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x60000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@64000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x64000 0x1000>;
#interrupt-cells = <1>;
};
fuse: picoxcell-fuse@80000 {
compatible = "picoxcell,fuse-pc3x2";
reg = <0x80000 0x10000>;
};
ssi: picoxcell-spi@90000 {
compatible = "picoxcell,spi";
reg = <0x90000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <10>;
};
ipsec: spacc@100000 {
compatible = "picochip,spacc-ipsec";
reg = <0x100000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
ref-clock = <&pclk>, "ref";
};
srtp: spacc@140000 {
compatible = "picochip,spacc-srtp";
reg = <0x140000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <23>;
};
l2_engine: spacc@180000 {
compatible = "picochip,spacc-l2";
reg = <0x180000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <22>;
ref-clock = <&pclk>, "ref";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x200000 0x80000>;
rtc0: rtc@00000 {
compatible = "picochip,pc3x2-rtc";
clock-freq = <200000000>;
reg = <0x00000 0xf>;
interrupt-parent = <&vic1>;
interrupts = <8>;
};
timer0: timer@10000 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <4>;
clock-freq = <200000000>;
reg = <0x10000 0x14>;
};
timer1: timer@10014 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <5>;
clock-freq = <200000000>;
reg = <0x10014 0x14>;
};
timer2: timer@10028 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <6>;
clock-freq = <200000000>;
reg = <0x10028 0x14>;
};
timer3: timer@1003c {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <7>;
clock-freq = <200000000>;
reg = <0x1003c 0x14>;
};
gpio: gpio@20000 {
compatible = "snps,dw-apb-gpio";
reg = <0x20000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
reg-io-width = <4>;
banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <8>;
regoffset-dat = <0x50>;
regoffset-set = <0x00>;
regoffset-dirout = <0x04>;
};
bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <8>;
regoffset-dat = <0x54>;
regoffset-set = <0x0c>;
regoffset-dirout = <0x10>;
};
};
uart0: uart@30000 {
compatible = "snps,dw-apb-uart";
reg = <0x30000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <10>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart1: uart@40000 {
compatible = "snps,dw-apb-uart";
reg = <0x40000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <9>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
wdog: watchdog@50000 {
compatible = "snps,dw-apb-wdg";
reg = <0x50000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <11>;
bus-clock = <&pclk>, "bus";
};
};
};
rwid-axi {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
ebi@50000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x40000000 0x08000000
1 0 0x48000000 0x08000000
2 0 0x50000000 0x08000000
3 0 0x58000000 0x08000000>;
};
axi2pico@c0000000 {
compatible = "picochip,axi2pico-pc3x2";
reg = <0xc0000000 0x10000>;
interrupts = <13 14 15 16 17 18 19 20 21>;
};
};
};
/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/include/ "skeleton.dtsi"
/ {
model = "Picochip picoXcell PC3X3";
compatible = "picochip,pc3x3";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,1176jz-s";
cpu-clock = <&arm_clk>, "cpu";
reg = <0>;
d-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-line-size = <32>;
i-cache-size = <32768>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
clkgate: clkgate@800a0048 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x800a0048 4>;
compatible = "picochip,pc3x3-clk-gate";
tzprot_clk: clock@0 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <0>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
spi_clk: clock@1 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <1>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
dmac0_clk: clock@2 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <2>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
dmac1_clk: clock@3 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <3>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
ebi_clk: clock@4 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <4>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
ipsec_clk: clock@5 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <5>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
l2_clk: clock@6 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <6>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
trng_clk: clock@7 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <7>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
fuse_clk: clock@8 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <8>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
otp_clk: clock@9 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <9>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
};
arm_clk: clock@11 {
compatible = "picochip,pc3x3-pll";
reg = <0x800a0050 0x8>;
picochip,min-freq = <140000000>;
picochip,max-freq = <700000000>;
ref-clock = <&ref_clk>, "ref";
clock-outputs = "cpu";
};
pclk: clock@12 {
compatible = "fixed-clock";
clock-outputs = "bus", "pclk";
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
};
paxi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x80000000 0x400000>;
emac: gem@30000 {
compatible = "cadence,gem";
reg = <0x30000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <31>;
};
dmac1: dmac@40000 {
compatible = "snps,dw-dmac";
reg = <0x40000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <25>;
};
dmac2: dmac@50000 {
compatible = "snps,dw-dmac";
reg = <0x50000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <26>;
};
vic0: interrupt-controller@60000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x60000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@64000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x64000 0x1000>;
#interrupt-cells = <1>;
};
fuse: picoxcell-fuse@80000 {
compatible = "picoxcell,fuse-pc3x3";
reg = <0x80000 0x10000>;
};
ssi: picoxcell-spi@90000 {
compatible = "picoxcell,spi";
reg = <0x90000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <10>;
};
ipsec: spacc@100000 {
compatible = "picochip,spacc-ipsec";
reg = <0x100000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
ref-clock = <&ipsec_clk>, "ref";
};
srtp: spacc@140000 {
compatible = "picochip,spacc-srtp";
reg = <0x140000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <23>;
};
l2_engine: spacc@180000 {
compatible = "picochip,spacc-l2";
reg = <0x180000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <22>;
ref-clock = <&l2_clk>, "ref";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x200000 0x80000>;
rtc0: rtc@00000 {
compatible = "picochip,pc3x2-rtc";
clock-freq = <200000000>;
reg = <0x00000 0xf>;
interrupt-parent = <&vic0>;
interrupts = <8>;
};
timer0: timer@10000 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <4>;
clock-freq = <200000000>;
reg = <0x10000 0x14>;
};
timer1: timer@10014 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <5>;
clock-freq = <200000000>;
reg = <0x10014 0x14>;
};
gpio: gpio@20000 {
compatible = "snps,dw-apb-gpio";
reg = <0x20000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
reg-io-width = <4>;
banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <8>;
regoffset-dat = <0x50>;
regoffset-set = <0x00>;
regoffset-dirout = <0x04>;
};
bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <16>;
regoffset-dat = <0x54>;
regoffset-set = <0x0c>;
regoffset-dirout = <0x10>;
};
bankd: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <30>;
regoffset-dat = <0x5c>;
regoffset-set = <0x24>;
regoffset-dirout = <0x28>;
};
};
uart0: uart@30000 {
compatible = "snps,dw-apb-uart";
reg = <0x30000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <10>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart1: uart@40000 {
compatible = "snps,dw-apb-uart";
reg = <0x40000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <9>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
wdog: watchdog@50000 {
compatible = "snps,dw-apb-wdg";
reg = <0x50000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <11>;
bus-clock = <&pclk>, "bus";
};
timer2: timer@60000 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <6>;
clock-freq = <200000000>;
reg = <0x60000 0x14>;
};
timer3: timer@60014 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <7>;
clock-freq = <200000000>;
reg = <0x60014 0x14>;
};
};
};
rwid-axi {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
ebi@50000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x40000000 0x08000000
1 0 0x48000000 0x08000000
2 0 0x50000000 0x08000000
3 0 0x58000000 0x08000000>;
};
axi2pico@c0000000 {
compatible = "picochip,axi2pico-pc3x3";
reg = <0xc0000000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <13 14 15 16 17 18 19 20 21>;
};
otp@ffff8000 {
compatible = "picochip,otp-pc3x3";
reg = <0xffff8000 0x8000>;
};
};
};
/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "picoxcell-pc3x2.dtsi"
/ {
model = "Picochip PC7302 (PC3X2)";
compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
memory {
device_type = "memory";
reg = <0x0 0x08000000>;
};
chosen {
linux,stdout-path = &uart0;
};
clocks {
ref_clk: clock@1 {
compatible = "fixed-clock";
clock-outputs = "ref";
clock-frequency = <20000000>;
};
};
rwid-axi {
ebi@50000000 {
nand: gpio-nand@2,0 {
compatible = "gpio-control-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <2 0x0000 0x1000>;
bus-clock = <&pclk>, "bus";
gpio-control-nand,io-sync-reg =
<0x00000000 0x80220000>;
gpios = <&banka 1 0 /* rdy */
&banka 2 0 /* nce */
&banka 3 0 /* ale */
&banka 4 0 /* cle */
0 /* nwp */>;
boot@100000 {
label = "Boot";
reg = <0x100000 0x80000>;
};
redundant-boot@200000 {
label = "Redundant Boot";
reg = <0x200000 0x80000>;
};
boot-env@300000 {
label = "Boot Evironment";
reg = <0x300000 0x20000>;
};
redundant-boot-env@320000 {
label = "Redundant Boot Environment";
reg = <0x300000 0x20000>;
};
kernel@380000 {
label = "Kernel";
reg = <0x380000 0x800000>;
};
fs@b80000 {
label = "File System";
reg = <0xb80000 0xf480000>;
};
};
};
};
};
/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "picoxcell-pc3x3.dtsi"
/ {
model = "Picochip PC7302 (PC3X3)";
compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
memory {
device_type = "memory";
reg = <0x0 0x08000000>;
};
chosen {
linux,stdout-path = &uart0;
};
clocks {
ref_clk: clock@10 {
compatible = "fixed-clock";
clock-outputs = "ref";
clock-frequency = <20000000>;
};
clkgate: clkgate@800a0048 {
clock@4 {
picochip,clk-no-disable;
};
};
};
rwid-axi {
ebi@50000000 {
nand: gpio-nand@2,0 {
compatible = "gpio-control-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <2 0x0000 0x1000>;
bus-clock = <&ebi_clk>, "bus";
gpio-control-nand,io-sync-reg =
<0x00000000 0x80220000>;
gpios = <&banka 1 0 /* rdy */
&banka 2 0 /* nce */
&banka 3 0 /* ale */
&banka 4 0 /* cle */
0 /* nwp */>;
boot@100000 {
label = "Boot";
reg = <0x100000 0x80000>;
};
redundant-boot@200000 {
label = "Redundant Boot";
reg = <0x200000 0x80000>;
};
boot-env@300000 {
label = "Boot Evironment";
reg = <0x300000 0x20000>;
};
redundant-boot-env@320000 {
label = "Redundant Boot Environment";
reg = <0x300000 0x20000>;
};
kernel@380000 {
label = "Kernel";
reg = <0x380000 0x800000>;
};
fs@b80000 {
label = "File System";
reg = <0xb80000 0xf480000>;
};
};
};
};
};
...@@ -102,7 +102,14 @@ ...@@ -102,7 +102,14 @@
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
#else
static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask)
{
return -ENODEV;
}
#endif
struct l2x0_regs { struct l2x0_regs {
unsigned long phy_base; unsigned long phy_base;
...@@ -121,6 +128,6 @@ struct l2x0_regs { ...@@ -121,6 +128,6 @@ struct l2x0_regs {
extern struct l2x0_regs l2x0_saved_regs; extern struct l2x0_regs l2x0_saved_regs;
#endif #endif /* __ASSEMBLY__ */
#endif #endif
obj-y := clock.o highbank.o system.o
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_SLEEP) += pm.o
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
struct clk {
unsigned long rate;
};
int clk_enable(struct clk *clk)
{
return 0;
}
void clk_disable(struct clk *clk)
{}
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
long clk_round_rate(struct clk *clk, unsigned long rate)
{
return clk->rate;
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
return 0;
}
static struct clk eclk = { .rate = 200000000 };
static struct clk pclk = { .rate = 150000000 };
static struct clk_lookup lookups[] = {
{ .clk = &pclk, .con_id = "apb_pclk", },
{ .clk = &pclk, .dev_id = "sp804", },
{ .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
{ .clk = &pclk, .dev_id = "fff36000.serial", },
};
void __init highbank_clocks_init(void)
{
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
}
extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
extern void highbank_clocks_init(void);
extern void __iomem *scu_base_addr;
#ifdef CONFIG_DEBUG_HIGHBANK_UART
extern void highbank_lluart_map_io(void);
#else
static inline void highbank_lluart_map_io(void) {}
#endif
/*
* Copyright 2010-2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/unified.h>
#include <asm/smp_scu.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/irqs.h>
#include "core.h"
#include "sysregs.h"
void __iomem *sregs_base;
#define HB_SCU_VIRT_BASE 0xfee00000
void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
static struct map_desc scu_io_desc __initdata = {
.virtual = HB_SCU_VIRT_BASE,
.pfn = 0, /* run-time */
.length = SZ_4K,
.type = MT_DEVICE,
};
static void __init highbank_scu_map_io(void)
{
unsigned long base;
/* Get SCU base */
asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
scu_io_desc.pfn = __phys_to_pfn(base);
iotable_init(&scu_io_desc, 1);
}
static void __init highbank_map_io(void)
{
highbank_scu_map_io();
highbank_lluart_map_io();
}
#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
HB_JUMP_TABLE_PHYS(cpu) + 15);
}
const static struct of_device_id irq_match[] = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
{}
};
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
l2x0_of_init(0, ~0UL);
}
static void __init highbank_timer_init(void)
{
int irq;
struct device_node *np;
void __iomem *timer_base;
/* Map system registers */
np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
sregs_base = of_iomap(np, 0);
WARN_ON(!sregs_base);
np = of_find_compatible_node(NULL, NULL, "arm,sp804");
timer_base = of_iomap(np, 0);
WARN_ON(!timer_base);
irq = irq_of_parse_and_map(np, 0);
highbank_clocks_init();
sp804_clocksource_init(timer_base + 0x20, "timer1");
sp804_clockevents_init(timer_base, irq, "timer0");
}
static struct sys_timer highbank_timer = {
.init = highbank_timer_init,
};
static void highbank_power_off(void)
{
hignbank_set_pwr_shutdown();
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
while (1)
cpu_do_idle();
}
static void __init highbank_init(void)
{
pm_power_off = highbank_power_off;
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *highbank_match[] __initconst = {
"calxeda,highbank",
NULL,
};
DT_MACHINE_START(HIGHBANK, "Highbank")
.map_io = highbank_map_io,
.init_irq = highbank_init_irq,
.timer = &highbank_timer,
.init_machine = highbank_init,
.dt_compat = highbank_match,
MACHINE_END
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/smp_scu.h>
#include <asm/cacheflush.h>
#include "core.h"
extern void secondary_startup(void);
int platform_cpu_kill(unsigned int cpu)
{
return 1;
}
/*
* platform-specific code to shutdown a CPU
*
*/
void platform_cpu_die(unsigned int cpu)
{
flush_cache_all();
highbank_set_cpu_jump(cpu, secondary_startup);
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
cpu_do_idle();
/* We should never return from idle */
panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
}
int platform_cpu_disable(unsigned int cpu)
{
/*
* CPU0 should not be shut down via hotplug. cpu_idle can WFI
* or a proper shutdown or hibernate should be used.
*/
return cpu == 0 ? -EPERM : 0;
}
/*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
.macro addruart,rp,rv,tmp
movw \rv, #0x6000
movt \rv, #0xfee3
movw \rp, #0x6000
movt \rp, #0xfff3
.endm
#include <asm/hardware/debug-pl01x.S>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
#ifndef __MACH_IO_H
#define __MACH_IO_H
#define __io(a) ({ (void)(a); __typesafe_io(0); })
#define __mem_pci(a) (a)
#endif
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define NR_IRQS 192
#endif
/*
* Copyright 2010-2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
extern void arch_reset(char mode, const char *cmd);
#endif
#ifndef __MACH_TIMEX_H
#define __MACH_TIMEX_H
#define CLOCK_TICK_RATE 1000000
#endif
#ifndef __MACH_UNCOMPRESS_H
#define __MACH_UNCOMPRESS_H
#define putc(c)
#define flush()
#define arch_decomp_setup()
#define arch_decomp_wdog()
#endif
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <asm/page.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>
#define HB_DEBUG_LL_PHYS_BASE 0xfff36000
#define HB_DEBUG_LL_VIRT_BASE 0xfee36000
static struct map_desc lluart_io_desc __initdata = {
.virtual = HB_DEBUG_LL_VIRT_BASE,
.pfn = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
};
void __init highbank_lluart_map_io(void)
{
iotable_init(&lluart_io_desc, 1);
}
/*
* Copyright 2010-2011 Calxeda, Inc.
* Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/clockchips.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/smp_twd.h>
/*
* Setup the local clock events for a CPU.
*/
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
if (!twd_base) {
twd_base = of_iomap(np, 0);
WARN_ON(!twd_base);
}
evt->irq = irq_of_parse_and_map(np, 0);
twd_timer_setup(evt);
return 0;
}
/*
* Copyright 2010-2011 Calxeda, Inc.
* Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/smp_scu.h>
#include <asm/hardware/gic.h>
#include "core.h"
extern void secondary_startup(void);
void __cpuinit platform_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
gic_raise_softirq(cpumask_of(cpu), 0);
return 0;
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
{
unsigned int i, ncores;
ncores = scu_get_core_count(scu_base_addr);
/* sanity check */
if (ncores > NR_CPUS) {
printk(KERN_WARNING
"highbank: no. of cores (%d) greater than configured "
"maximum of %d - clipping\n",
ncores, NR_CPUS);
ncores = NR_CPUS;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
scu_enable(scu_base_addr);
/*
* Write the address of secondary startup into the jump table
* The cores are in wfi and wait until they receive a soft interrupt
* and a non-zero value to jump to. Then the secondary CPU branches
* to this address.
*/
for (i = 1; i < max_cpus; i++)
highbank_set_cpu_jump(i, secondary_startup);
}
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/suspend.h>
#include <asm/proc-fns.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include "core.h"
#include "sysregs.h"
static int highbank_suspend_finish(unsigned long val)
{
cpu_do_idle();
return 0;
}
static int highbank_pm_enter(suspend_state_t state)
{
hignbank_set_pwr_suspend();
highbank_set_cpu_jump(0, cpu_resume);
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
cpu_suspend(0, highbank_suspend_finish);
return 0;
}
static const struct platform_suspend_ops highbank_pm_ops = {
.enter = highbank_pm_enter,
.valid = suspend_valid_only_mem,
};
static int __init highbank_pm_init(void)
{
suspend_set_ops(&highbank_pm_ops);
return 0;
}
module_init(highbank_pm_init);
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _MACH_HIGHBANK__SYSREGS_H_
#define _MACH_HIGHBANK__SYSREGS_H_
#include <linux/io.h>
extern void __iomem *sregs_base;
#define HB_SREG_A9_PWR_REQ 0xf00
#define HB_SREG_A9_BOOT_STAT 0xf04
#define HB_SREG_A9_BOOT_DATA 0xf08
#define HB_PWR_SUSPEND 0
#define HB_PWR_SOFT_RESET 1
#define HB_PWR_HARD_RESET 2
#define HB_PWR_SHUTDOWN 3
static inline void hignbank_set_pwr_suspend(void)
{
writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
}
static inline void hignbank_set_pwr_shutdown(void)
{
writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
}
static inline void hignbank_set_pwr_soft_reset(void)
{
writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
}
static inline void hignbank_set_pwr_hard_reset(void)
{
writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
}
#endif
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <asm/smp_scu.h>
#include <asm/proc-fns.h>
#include "core.h"
#include "sysregs.h"
void arch_reset(char mode, const char *cmd)
{
if (mode == 'h')
hignbank_set_pwr_hard_reset();
else
hignbank_set_pwr_soft_reset();
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
cpu_do_idle();
}
config IMX_HAVE_DMA_V1 config IMX_HAVE_DMA_V1
bool bool
config HAVE_IMX_GPC
bool
config HAVE_IMX_MMDC
bool
config HAVE_IMX_SRC
bool
# #
# ARCH_MX31 and ARCH_MX35 are left for compatibility # ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
...@@ -64,6 +74,7 @@ config SOC_IMX31 ...@@ -64,6 +74,7 @@ config SOC_IMX31
select ARCH_MXC_AUDMUX_V2 select ARCH_MXC_AUDMUX_V2
select ARCH_MX31 select ARCH_MX31
select MXC_AVIC select MXC_AVIC
select SMP_ON_UP if SMP
config SOC_IMX35 config SOC_IMX35
bool bool
...@@ -73,6 +84,7 @@ config SOC_IMX35 ...@@ -73,6 +84,7 @@ config SOC_IMX35
select HAVE_EPIT select HAVE_EPIT
select ARCH_MX35 select ARCH_MX35
select MXC_AVIC select MXC_AVIC
select SMP_ON_UP if SMP
if ARCH_IMX_V4_V5 if ARCH_IMX_V4_V5
...@@ -341,7 +353,7 @@ config MACH_IMX27IPCAM ...@@ -341,7 +353,7 @@ config MACH_IMX27IPCAM
endif endif
if ARCH_MX3 if ARCH_IMX_V6_V7
comment "MX31 platforms:" comment "MX31 platforms:"
...@@ -592,4 +604,20 @@ config MACH_VPR200 ...@@ -592,4 +604,20 @@ config MACH_VPR200
Include support for VPR200 platform. This includes specific Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals. configurations for the board and its peripherals.
comment "i.MX6 family:"
config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_GIC
select CACHE_L2X0
select CPU_V7
select HAVE_ARM_SCU
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select USE_OF
help
This enables support for Freescale i.MX6 Quad processor.
endif endif
...@@ -60,3 +60,14 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o ...@@ -60,3 +60,14 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
obj-$(CONFIG_CPU_V7) += head-v7.o
AFLAGS_head-v7.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
...@@ -17,3 +17,7 @@ initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000 ...@@ -17,3 +17,7 @@ initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000 zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100 params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000 initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
此差异已折叠。
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/hardware/gic.h>
#define GPC_IMR1 0x008
#define GPC_PGC_CPU_PDN 0x2a0
#define IMR_NUM 4
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
void imx_gpc_pre_suspend(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Tell GPC to power off ARM core when suspend */
writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
}
}
void imx_gpc_post_resume(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Keep ARM core powered on for other low-power modes */
writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
}
static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
{
unsigned int idx = d->irq / 32 - 1;
u32 mask;
/* Sanity check for SPI irq */
if (d->irq < 32)
return -EINVAL;
mask = 1 << d->irq % 32;
gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
gpc_wake_irqs[idx] & ~mask;
return 0;
}
static void imx_gpc_irq_unmask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
/* Sanity check for SPI irq */
if (d->irq < 32)
return;
reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
val = readl_relaxed(reg);
val &= ~(1 << d->irq % 32);
writel_relaxed(val, reg);
}
static void imx_gpc_irq_mask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
/* Sanity check for SPI irq */
if (d->irq < 32)
return;
reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
val = readl_relaxed(reg);
val |= 1 << (d->irq % 32);
writel_relaxed(val, reg);
}
void __init imx_gpc_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
gpc_base = of_iomap(np, 0);
WARN_ON(!gpc_base);
/* Register GPC as the secondary interrupt controller behind GIC */
gic_arch_extn.irq_mask = imx_gpc_irq_mask;
gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
}
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
.section ".text.head", "ax"
__CPUINIT
/*
* The secondary kernel init calls v7_flush_dcache_all before it enables
* the L1; however, the L1 comes out of reset in an undefined state, so
* the clean + invalidate performed by v7_flush_dcache_all causes a bunch
* of cache lines with uninitialized data and uninitialized tags to get
* written out to memory, which does really unpleasant things to the main
* processor. We fix this by performing an invalidate, rather than a
* clean + invalidate, before jumping into the kernel.
*
* This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
* to be called for both secondary cores startup and primary core resume
* procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
*/
ENTRY(v7_invalidate_l1)
mov r0, #0
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
ldr r1, =0x7fff
and r2, r1, r0, lsr #13
ldr r1, =0x3ff
and r3, r1, r0, lsr #3 @ NumWays - 1
add r2, r2, #1 @ NumSets
and r0, r0, #0x7
add r0, r0, #4 @ SetShift
clz r1, r3 @ WayShift
add r4, r3, #1 @ NumWays
1: sub r2, r2, #1 @ NumSets--
mov r3, r4 @ Temp = NumWays
2: subs r3, r3, #1 @ Temp--
mov r5, r3, lsl r1
mov r6, r2, lsl r0
orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
mcr p15, 0, r5, c7, c6, 2
bgt 2b
cmp r2, #0
bgt 1b
dsb
isb
mov pc, lr
ENDPROC(v7_invalidate_l1)
#ifdef CONFIG_SMP
ENTRY(v7_secondary_startup)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(v7_secondary_startup)
#endif
/*
* The following code is located into the .data section. This is to
* allow phys_l2x0_saved_regs to be accessed with a relative load
* as we are running on physical address here.
*/
.data
.align
.macro pl310_resume
ldr r2, phys_l2x0_saved_regs
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
mov r1, #0x1
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
pl310_resume
b cpu_resume
ENDPROC(v7_cpu_resume)
.globl phys_l2x0_saved_regs
phys_l2x0_saved_regs:
.long 0
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/errno.h>
#include <asm/cacheflush.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
{
return 1;
}
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void platform_cpu_die(unsigned int cpu)
{
flush_cache_all();
imx_enable_cpu(cpu, false);
cpu_do_idle();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
}
int platform_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
* e.g. clock tick interrupts)
*/
return cpu == 0 ? -EPERM : 0;
}
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <asm/page.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
static struct map_desc imx_lluart_desc = {
#ifdef CONFIG_DEBUG_IMX6Q_UART
.virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
.pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
.length = MX6Q_UART4_SIZE,
.type = MT_DEVICE,
#endif
};
void __init imx_lluart_map_io(void)
{
if (imx_lluart_desc.virtual)
iotable_init(&imx_lluart_desc, 1);
}
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <linux/clockchips.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/smp_twd.h>
/*
* Setup the local clock events for a CPU.
*/
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
if (!twd_base) {
twd_base = of_iomap(np, 0);
WARN_ON(!twd_base);
}
evt->irq = irq_of_parse_and_map(np, 0);
twd_timer_setup(evt);
return 0;
}
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/hardware.h>
static void __init imx6q_init_machine(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6q_pm_init();
}
static void __init imx6q_map_io(void)
{
imx_lluart_map_io();
imx_scu_map_io();
}
static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
32 * 7; /* imx6q gets 7 gpio ports */
irq_domain_add_simple(np, gpio_irq_base);
gpio_irq_base += 32;
}
static const struct of_device_id imx6q_irq_match[] __initconst = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
{ .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
{ /* sentinel */ }
};
static void __init imx6q_init_irq(void)
{
l2x0_of_init(0, ~0UL);
imx_src_init();
imx_gpc_init();
of_irq_init(imx6q_irq_match);
}
static void __init imx6q_timer_init(void)
{
mx6q_clocks_init();
}
static struct sys_timer imx6q_timer = {
.init = imx6q_timer_init,
};
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-sabreauto",
NULL,
};
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
.handle_irq = imx6q_handle_irq,
.timer = &imx6q_timer,
.init_machine = imx6q_init_machine,
.dt_compat = imx6q_dt_compat,
MACHINE_END
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
...@@ -11,7 +11,6 @@ ...@@ -11,7 +11,6 @@
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include <linux/io.h> #include <linux/io.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/irqdomain.h> #include <linux/irqdomain.h>
......
obj-y := common.o
obj-y += time.o
obj-y += io.o
此差异已折叠。
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* All enquiries to support@picochip.com
*/
#ifndef __PICOXCELL_COMMON_H__
#define __PICOXCELL_COMMON_H__
#include <asm/mach/time.h>
extern struct sys_timer picoxcell_timer;
extern void picoxcell_map_io(void);
#endif /* __PICOXCELL_COMMON_H__ */
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册