arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files

Since the introduction of the CP110 dt files, the sata node was
misplaced. Move it at the right place. Thanks to this, the files are
completely ordered.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -162,15 +162,6 @@
 				};
 			};
 
-			cpm_sata0: sata@540000 {
-				compatible = "marvell,armada-8k-ahci",
-					     "generic-ahci";
-				reg = <0x540000 0x30000>;
-				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 15>;
-				status = "disabled";
-			};
-
 			cpm_usb3_0: usb3@500000 {
 				compatible = "marvell,armada-8k-xhci",
 					     "generic-xhci";
@@ -191,6 +182,15 @@
 				status = "disabled";
 			};
 
+			cpm_sata0: sata@540000 {
+				compatible = "marvell,armada-8k-ahci",
+					     "generic-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 15>;
+				status = "disabled";
+			};
+
 			cpm_xor0: xor@6a0000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x6a0000 0x1000>,

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -163,15 +163,6 @@
 
 			};
 
-			cps_sata0: sata@540000 {
-				compatible = "marvell,armada-8k-ahci",
-					     "generic-ahci";
-				reg = <0x540000 0x30000>;
-				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 15>;
-				status = "disabled";
-			};
-
 			cps_usb3_0: usb3@500000 {
 				compatible = "marvell,armada-8k-xhci",
 					     "generic-xhci";
@@ -192,6 +183,15 @@
 				status = "disabled";
 			};
 
+			cps_sata0: sata@540000 {
+				compatible = "marvell,armada-8k-ahci",
+					     "generic-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 15>;
+				status = "disabled";
+			};
+
 			cps_xor0: xor@6a0000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x6a0000 0x1000>,