提交 99103f77 编写于 作者: L Linus Torvalds

Merge tag 'pinctrl-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 "This fixes a few pinctrl problems seen since v3.7-rc1:
   - Section tagging for init code
   - Use proper pointers to lookup struct device * in the bcm2835
     (a.k.a.  Raspberry Pi)
   - Remove duplicate #includes
   - Fix bad return values in errorpath
   - Remove extraneous pull function from the sirf driver causing build
     errors
   - Provide compilation stubs for the Nomadik pinctrl driver when used
     with legacy systems without PRCMU units
   - Various irqdomain fixes in the Nomadik driver as predicted
   - Various smallish bugs in the Tegra driver, most also targeted for
     stable
   - Removed a deadlocking mutex in the groups debugfs show function"

* tag 'pinctrl-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl/nomadik: pass DT node to the irqdomain
  pinctrl/nomadik: use zero as default irq_start
  pinctrl: fix missing unlock on error in pinctrl_groups_show()
  pinctrl/nomadik: use irq_create_mapping()
  pinctrl: remove mutex lock in groups show
  pinctrl: tegra: correct bank for pingroup and drv pingroup
  pinctrl: tegra: set low power mode bank width to 2
  dt: Document: correct tegra20/30 pinctrl slew-rate name
......@@ -93,7 +93,7 @@ Valid values for pin and group names are:
With some exceptions, these support nvidia,high-speed-mode,
nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling.
drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
......
......@@ -83,7 +83,7 @@ Valid values for pin and group names are:
drive groups:
These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
......
......@@ -1061,8 +1061,10 @@ static int pinctrl_groups_show(struct seq_file *s, void *what)
seq_printf(s, "group: %s\n", gname);
for (i = 0; i < num_pins; i++) {
pname = pin_get_name(pctldev, pins[i]);
if (WARN_ON(!pname))
if (WARN_ON(!pname)) {
mutex_unlock(&pinctrl_mutex);
return -EINVAL;
}
seq_printf(s, "pin %d (%s)\n", pins[i], pname);
}
seq_puts(s, "\n");
......
......@@ -537,8 +537,6 @@ static int pinconf_groups_show(struct seq_file *s, void *what)
seq_puts(s, "Pin config settings per pin group\n");
seq_puts(s, "Format: group (name): configs\n");
mutex_lock(&pinctrl_mutex);
while (selector < ngroups) {
const char *gname = pctlops->get_group_name(pctldev, selector);
......@@ -549,8 +547,6 @@ static int pinconf_groups_show(struct seq_file *s, void *what)
selector++;
}
mutex_unlock(&pinctrl_mutex);
return 0;
}
......
......@@ -1056,7 +1056,7 @@ static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
return irq_find_mapping(nmk_chip->domain, offset);
return irq_create_mapping(nmk_chip->domain, offset);
}
#ifdef CONFIG_DEBUG_FS
......@@ -1281,7 +1281,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
struct clk *clk;
int secondary_irq;
void __iomem *base;
int irq_start = -1;
int irq_start = 0;
int irq;
int ret;
......@@ -1387,7 +1387,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
if (!np)
irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio);
nmk_chip->domain = irq_domain_add_simple(NULL,
nmk_chip->domain = irq_domain_add_simple(np,
NMK_GPIO_PER_CHIP, irq_start,
&nmk_gpio_irq_simple_ops, nmk_chip);
if (!nmk_chip->domain) {
......
......@@ -464,7 +464,7 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx,
*bank = g->drv_bank;
*reg = g->drv_reg;
*bit = g->lpmd_bit;
*width = 1;
*width = 2;
break;
case TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH:
*bank = g->drv_bank;
......
......@@ -3345,10 +3345,10 @@ static const struct tegra_function tegra30_functions[] = {
FUNCTION(vi_alt3),
};
#define MUXCTL_REG_A 0x3000
#define PINGROUP_REG_A 0x868
#define DRV_PINGROUP_REG_A 0x868 /* bank 0 */
#define PINGROUP_REG_A 0x3000 /* bank 1 */
#define PINGROUP_REG_Y(r) ((r) - MUXCTL_REG_A)
#define PINGROUP_REG_Y(r) ((r) - PINGROUP_REG_A)
#define PINGROUP_REG_N(r) -1
#define PINGROUP(pg_name, f0, f1, f2, f3, f_safe, r, od, ior) \
......@@ -3364,25 +3364,25 @@ static const struct tegra_function tegra30_functions[] = {
}, \
.func_safe = TEGRA_MUX_ ## f_safe, \
.mux_reg = PINGROUP_REG_Y(r), \
.mux_bank = 0, \
.mux_bank = 1, \
.mux_bit = 0, \
.pupd_reg = PINGROUP_REG_Y(r), \
.pupd_bank = 0, \
.pupd_bank = 1, \
.pupd_bit = 2, \
.tri_reg = PINGROUP_REG_Y(r), \
.tri_bank = 0, \
.tri_bank = 1, \
.tri_bit = 4, \
.einput_reg = PINGROUP_REG_Y(r), \
.einput_bank = 0, \
.einput_bank = 1, \
.einput_bit = 5, \
.odrain_reg = PINGROUP_REG_##od(r), \
.odrain_bank = 0, \
.odrain_bank = 1, \
.odrain_bit = 6, \
.lock_reg = PINGROUP_REG_Y(r), \
.lock_bank = 0, \
.lock_bank = 1, \
.lock_bit = 7, \
.ioreset_reg = PINGROUP_REG_##ior(r), \
.ioreset_bank = 0, \
.ioreset_bank = 1, \
.ioreset_bit = 8, \
.drv_reg = -1, \
}
......@@ -3401,8 +3401,8 @@ static const struct tegra_function tegra30_functions[] = {
.odrain_reg = -1, \
.lock_reg = -1, \
.ioreset_reg = -1, \
.drv_reg = ((r) - PINGROUP_REG_A), \
.drv_bank = 1, \
.drv_reg = ((r) - DRV_PINGROUP_REG_A), \
.drv_bank = 0, \
.hsm_bit = hsm_b, \
.schmitt_bit = schmitt_b, \
.lpmd_bit = lpmd_b, \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册