提交 9907f85e 编写于 作者: T Tero Kristo 提交者: Tony Lindgren

ARM: AM33xx/OMAP4+: CM: remove cdoffs parameter from wait_module_idle/ready

This is not needed for anything. This also eases the consolidation of
the wait_module_ready / wait_module_idle calls behind a generic CM
driver API by reducing the number of needed parameters.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Tested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 9002e921
......@@ -96,13 +96,12 @@ static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask)
/**
* _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
* bit 0.
*/
static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
static u32 _clkctrl_idlest(u16 inst, u16 clkctrl_offs)
{
u32 v = am33xx_cm_read_reg(inst, clkctrl_offs);
v &= AM33XX_IDLEST_MASK;
......@@ -113,17 +112,16 @@ static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
/**
* _is_module_ready - can module registers be accessed without causing an abort?
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
* *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
*/
static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
static bool _is_module_ready(u16 inst, u16 clkctrl_offs)
{
u32 v;
v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs);
v = _clkctrl_idlest(inst, clkctrl_offs);
return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
......@@ -229,7 +227,6 @@ void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
/**
* am33xx_cm_wait_module_ready - wait for a module to be in 'func' state
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Wait for the module IDLEST to be functional. If the idle state is in any
......@@ -237,11 +234,11 @@ void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
* sysconfig cannot be accessed and will probably lead to an "imprecise
* external abort"
*/
int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
int am33xx_cm_wait_module_ready(u16 inst, u16 clkctrl_offs)
{
int i = 0;
omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
......@@ -251,21 +248,20 @@ int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
* am33xx_cm_wait_module_idle - wait for a module to be in 'disabled'
* state
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Wait for the module IDLEST to be disabled. Some PRCM transition,
* like reset assertion or parent clock de-activation must wait the
* module to be fully disabled.
*/
int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
int am33xx_cm_wait_module_idle(u16 inst, u16 clkctrl_offs)
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) ==
omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_READY_TIME, i);
......
......@@ -381,17 +381,14 @@ void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
u16 clkctrl_offs);
int am33xx_cm_wait_module_idle(u16 inst, u16 clkctrl_offs);
extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
u16 clkctrl_offs);
int am33xx_cm_wait_module_ready(u16 inst, u16 clkctrl_offs);
#else
static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
u16 clkctrl_offs)
static inline int am33xx_cm_wait_module_idle(u16 inst, u16 clkctrl_offs)
{
return 0;
}
......@@ -403,8 +400,8 @@ static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
}
static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
u16 clkctrl_offs)
static inline int am33xx_cm_wait_module_ready(u16 inst, u16 clkctrl_offs)
{
return 0;
}
......
......@@ -78,13 +78,12 @@ void omap_cm_base_init(void)
* _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
* bit 0.
*/
static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
static u32 _clkctrl_idlest(u8 part, u16 inst, u16 clkctrl_offs)
{
u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
v &= OMAP4430_IDLEST_MASK;
......@@ -96,17 +95,16 @@ static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
* _is_module_ready - can module registers be accessed without causing an abort?
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
* *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
*/
static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
static bool _is_module_ready(u8 part, u16 inst, u16 clkctrl_offs)
{
u32 v;
v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs);
v = _clkctrl_idlest(part, inst, clkctrl_offs);
return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
......@@ -267,7 +265,6 @@ void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
* omap4_cminst_wait_module_ready - wait for a module to be in 'func' state
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Wait for the module IDLEST to be functional. If the idle state is in any
......@@ -275,15 +272,14 @@ void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
* sysconfig cannot be accessed and will probably lead to an "imprecise
* external abort"
*/
int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
int omap4_cminst_wait_module_ready(u8 part, u16 inst, u16 clkctrl_offs)
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs),
omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
......@@ -294,21 +290,20 @@ int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
* state
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
* @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Wait for the module IDLEST to be disabled. Some PRCM transition,
* like reset assertion or parent clock de-activation must wait the
* module to be fully disabled.
*/
int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
int omap4_cminst_wait_module_idle(u8 part, u16 inst, u16 clkctrl_offs)
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_DISABLE_TIME, i);
......
......@@ -16,9 +16,8 @@ void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs);
void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs);
void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs);
void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs);
extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
int omap4_cminst_wait_module_ready(u8 part, u16 inst, u16 clkctrl_offs);
int omap4_cminst_wait_module_idle(u8 part, u16 inst, u16 clkctrl_offs);
extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
......
......@@ -1028,7 +1028,6 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
......@@ -1053,7 +1052,6 @@ static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
return 0;
return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
......@@ -2977,7 +2975,6 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
......@@ -3004,7 +3001,6 @@ static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
/* XXX check module SIDLEMODE, hardreset status */
return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册