提交 98810a6d 编写于 作者: M Mark Brown

Merge remote-tracking branches 'asoc/fix/intel', 'asoc/fix/jz4740',...

Merge remote-tracking branches 'asoc/fix/intel', 'asoc/fix/jz4740', 'asoc/fix/rcar', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/tlv320aic3x' into asoc-linus
......@@ -13,6 +13,9 @@ Required properties:
"ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
- reg - <int> - I2C slave address
- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
DVDD-supply : power supplies for the device as covered in
Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
......@@ -24,9 +27,6 @@ Optional properties:
3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
If this node is not mentioned or if the value is unknown, then
micbias is set to 2.0V.
- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
DVDD-supply : power supplies for the device as covered in
Documentation/devicetree/bindings/regulator/regulator.txt
CODEC output pins:
* HPL
......
......@@ -1399,7 +1399,6 @@ static int aic3x_probe(struct snd_soc_codec *codec)
}
aic3x_add_widgets(codec);
list_add(&aic3x->list, &reset_list);
return 0;
......@@ -1569,7 +1568,13 @@ static int aic3x_i2c_probe(struct i2c_client *i2c,
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_aic3x, &aic3x_dai, 1);
return ret;
if (ret != 0)
goto err_gpio;
list_add(&aic3x->list, &reset_list);
return 0;
err_gpio:
if (gpio_is_valid(aic3x->gpio_reset) &&
......
......@@ -136,7 +136,7 @@ struct sst_module_data {
enum sst_data_type data_type; /* type of module data */
u32 size; /* size in bytes */
u32 offset; /* offset in FW file */
int32_t offset; /* offset in FW file */
u32 data_offset; /* offset in ADSP memory space */
void *data; /* module data */
};
......
......@@ -617,7 +617,7 @@ static void hsw_notification_work(struct work_struct *work)
case IPC_POSITION_CHANGED:
trace_ipc_notification("DSP stream position changed for",
stream->reply.stream_hw_id);
sst_dsp_inbox_read(hsw->dsp, pos, sizeof(pos));
sst_dsp_inbox_read(hsw->dsp, pos, sizeof(*pos));
if (stream->notify_position)
stream->notify_position(stream, stream->pdata);
......@@ -991,7 +991,8 @@ int sst_hsw_stream_get_volume(struct sst_hsw *hsw, struct sst_hsw_stream *stream
return -EINVAL;
sst_dsp_read(hsw->dsp, volume,
stream->reply.volume_register_address[channel], sizeof(volume));
stream->reply.volume_register_address[channel],
sizeof(*volume));
return 0;
}
......@@ -1609,7 +1610,7 @@ int sst_hsw_dx_set_state(struct sst_hsw *hsw,
trace_ipc_request("PM enter Dx state", state);
ret = ipc_tx_message_wait(hsw, header, &state_, sizeof(state_),
dx, sizeof(dx));
dx, sizeof(*dx));
if (ret < 0) {
dev_err(hsw->dev, "ipc: error set dx state %d failed\n", state);
return ret;
......
#
# Jz4740 Platform Support
#
snd-soc-jz4740-objs := jz4740-pcm.o
snd-soc-jz4740-i2s-objs := jz4740-i2s.o
obj-$(CONFIG_SND_JZ4740_SOC) += snd-soc-jz4740.o
obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o
# Jz4740 Machine Support
......
......@@ -258,7 +258,7 @@ static int rsnd_src_init(struct rsnd_mod *mod,
{
struct rsnd_src *src = rsnd_mod_to_src(mod);
clk_enable(src->clk);
clk_prepare_enable(src->clk);
return 0;
}
......@@ -269,7 +269,7 @@ static int rsnd_src_quit(struct rsnd_mod *mod,
{
struct rsnd_src *src = rsnd_mod_to_src(mod);
clk_disable(src->clk);
clk_disable_unprepare(src->clk);
return 0;
}
......
......@@ -171,7 +171,7 @@ static void rsnd_ssi_hw_start(struct rsnd_ssi *ssi,
u32 cr;
if (0 == ssi->usrcnt) {
clk_enable(ssi->clk);
clk_prepare_enable(ssi->clk);
if (rsnd_dai_is_clk_master(rdai)) {
if (rsnd_ssi_clk_from_parent(ssi))
......@@ -230,7 +230,7 @@ static void rsnd_ssi_hw_stop(struct rsnd_ssi *ssi,
rsnd_ssi_master_clk_stop(ssi);
}
clk_disable(ssi->clk);
clk_disable_unprepare(ssi->clk);
}
dev_dbg(dev, "ssi%d hw stopped\n", rsnd_mod_id(&ssi->mod));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册