提交 98732da1 编写于 作者: M Miquel Raynal

mtd: rawnand: do not export nand_scan_[ident|tail]() anymore

Both nand_scan_ident() and nand_scan_tail() helpers used to be called
directly from controller drivers that needed to tweak some ECC-related
parameters before nand_scan_tail(). This separation prevented dynamic
allocations during the phase of NAND identification, which was
inconvenient.

All controller drivers have been moved to use nand_scan(), in
conjunction with the chip->ecc.[attach|detach]_chip() hooks that
actually do the required tweaking sequence between both ident/tail
calls, allowing programmers to use dynamic allocation as they need all
across the scanning sequence.

Declare nand_scan_[ident|tail]() statically now.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>
上级 ee1af829
......@@ -5924,7 +5924,7 @@ static int nand_dt_init(struct nand_chip *chip)
}
/**
* nand_scan_ident - [NAND Interface] Scan for the NAND device
* nand_scan_ident - Scan for the NAND device
* @mtd: MTD device structure
* @maxchips: number of chips to scan for
* @table: alternative NAND ID table
......@@ -5932,9 +5932,13 @@ static int nand_dt_init(struct nand_chip *chip)
* This is the first phase of the normal nand_scan() function. It reads the
* flash ID and sets up MTD fields accordingly.
*
* This helper used to be called directly from controller drivers that needed
* to tweak some ECC-related parameters before nand_scan_tail(). This separation
* prevented dynamic allocations during this phase which was unconvenient and
* as been banned for the benefit of the ->init_ecc()/cleanup_ecc() hooks.
*/
int nand_scan_ident(struct mtd_info *mtd, int maxchips,
struct nand_flash_dev *table)
static int nand_scan_ident(struct mtd_info *mtd, int maxchips,
struct nand_flash_dev *table)
{
int i, nand_maf_id, nand_dev_id;
struct nand_chip *chip = mtd_to_nand(mtd);
......@@ -6008,7 +6012,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
return 0;
}
EXPORT_SYMBOL(nand_scan_ident);
static int nand_set_ecc_soft_ops(struct mtd_info *mtd)
{
......@@ -6385,14 +6388,14 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd)
}
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
* nand_scan_tail - Scan for the NAND device
* @mtd: MTD device structure
*
* This is the second phase of the normal nand_scan() function. It fills out
* all the uninitialized function pointers with the defaults and scans for a
* bad block table if appropriate.
*/
int nand_scan_tail(struct mtd_info *mtd)
static int nand_scan_tail(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
......@@ -6716,7 +6719,6 @@ int nand_scan_tail(struct mtd_info *mtd)
return ret;
}
EXPORT_SYMBOL(nand_scan_tail);
static int nand_attach(struct nand_chip *chip)
{
......
......@@ -35,17 +35,6 @@ static inline int nand_scan(struct mtd_info *mtd, int max_chips)
return nand_scan_with_ids(mtd, max_chips, NULL);
}
/*
* Separate phases of nand_scan(), allowing board driver to intervene
* and override command or ECC setup according to flash type.
*/
int nand_scan_ident(struct mtd_info *mtd, int max_chips,
struct nand_flash_dev *table);
int nand_scan_tail(struct mtd_info *mtd);
/* Unregister the MTD device and free resources held by the NAND device */
void nand_release(struct mtd_info *mtd);
/* Internal helper for board drivers which need to override command function */
void nand_wait_ready(struct mtd_info *mtd);
......@@ -1745,8 +1734,13 @@ int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len,
int nand_write_data_op(struct nand_chip *chip, const void *buf,
unsigned int len, bool force_8bit);
/* Free resources held by the NAND device */
/*
* Free resources held by the NAND device, must be called on error after a
* sucessful nand_scan().
*/
void nand_cleanup(struct nand_chip *chip);
/* Unregister the MTD device and calls nand_cleanup() */
void nand_release(struct mtd_info *mtd);
/* Default extended ID decoding function */
void nand_decode_ext_id(struct nand_chip *chip);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册