staging: iio: adc: Enable driver support for ad799x AD converters

Driver for ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997 and
ad7998 multichannel ADC.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/iio/adc/Kconfig

@@ -26,3 +26,23 @@ config MAX1363_RING_BUFFER
 	help
 	  Say yes here to include ring buffer support in the MAX1363
 	  ADC driver.
+
+config AD799X
+	tristate "Analog Devices AD799x ADC driver"
+	depends on I2C
+	select IIO_TRIGGER if IIO_RING_BUFFER
+	select AD799X_RING_BUFFER
+	help
+	  Say yes here to build support for Analog Devices:
+	  ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
+	  i2c analog to digital convertors (ADC). Provides direct access
+	  via sysfs.
+
+config AD799X_RING_BUFFER
+	bool "Analog Devices AD799x: use ring buffer"
+	depends on AD799X
+	select IIO_RING_BUFFER
+	select IIO_SW_RING
+	help
+	  Say yes here to include ring buffer support in the AD799X
+	  ADC driver.

drivers/staging/iio/adc/Makefile

@@ -6,3 +6,7 @@ max1363-y := max1363_core.o
 max1363-y += max1363_ring.o
 
 obj-$(CONFIG_MAX1363) += max1363.o
+
+ad799x-y := ad799x_core.o
+ad799x-$(CONFIG_AD799X_RING_BUFFER) += ad799x_ring.o
+obj-$(CONFIG_AD799X) += ad799x.o
\ No newline at end of file

drivers/staging/iio/adc/ad799x.h

+/*
+ * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ * Copyright (C) 2008-2010 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ad799x.h
+ */
+
+#ifndef _AD799X_H_
+#define  _AD799X_H_
+
+#define AD799X_CHANNEL_SHIFT			4
+
+/*
+ * AD7991, AD7995 and AD7999 defines
+ */
+
+#define AD7991_REF_SEL				0x08
+#define AD7991_FLTR				0x04
+#define AD7991_BIT_TRIAL_DELAY			0x02
+#define AD7991_SAMPLE_DELAY			0x01
+
+/*
+ * AD7992, AD7993, AD7994, AD7997 and AD7998 defines
+ */
+
+#define AD7998_FLTR				0x08
+#define AD7998_ALERT_EN				0x04
+#define AD7998_BUSY_ALERT			0x02
+#define AD7998_BUSY_ALERT_POL			0x01
+
+#define AD7998_CONV_RES_REG			0x0
+#define AD7998_ALERT_STAT_REG			0x1
+#define AD7998_CONF_REG				0x2
+#define AD7998_CYCLE_TMR_REG			0x3
+#define AD7998_DATALOW_CH1_REG			0x4
+#define AD7998_DATAHIGH_CH1_REG			0x5
+#define AD7998_HYST_CH1_REG			0x6
+#define AD7998_DATALOW_CH2_REG			0x7
+#define AD7998_DATAHIGH_CH2_REG			0x8
+#define AD7998_HYST_CH2_REG			0x9
+#define AD7998_DATALOW_CH3_REG			0xA
+#define AD7998_DATAHIGH_CH3_REG			0xB
+#define AD7998_HYST_CH3_REG			0xC
+#define AD7998_DATALOW_CH4_REG			0xD
+#define AD7998_DATAHIGH_CH4_REG			0xE
+#define AD7998_HYST_CH4_REG			0xF
+
+#define AD7998_CYC_MASK				0x7
+#define AD7998_CYC_DIS				0x0
+#define AD7998_CYC_TCONF_32			0x1
+#define AD7998_CYC_TCONF_64			0x2
+#define AD7998_CYC_TCONF_128			0x3
+#define AD7998_CYC_TCONF_256			0x4
+#define AD7998_CYC_TCONF_512			0x5
+#define AD7998_CYC_TCONF_1024			0x6
+#define AD7998_CYC_TCONF_2048			0x7
+
+#define AD7998_ALERT_STAT_CLEAR			0xFF
+
+/*
+ * AD7997 and AD7997 defines
+ */
+
+#define AD7997_8_READ_SINGLE			0x80
+#define AD7997_8_READ_SEQUENCE			0x70
+
+enum {
+	ad7991,
+	ad7995,
+	ad7999,
+	ad7992,
+	ad7993,
+	ad7994,
+	ad7997,
+	ad7998
+};
+
+struct ad799x_state;
+
+/**
+ * struct ad799x_chip_info - chip specifc information
+ * @num_inputs:		number of physical inputs on chip
+ * @bits:		accuracy of the adc in bits
+ * @int_vref_mv:	the internal reference voltage
+ * @monitor_mode:	whether the chip supports monitor interrupts
+ * @default_config:	device default configuration
+ * @dev_attrs:		pointer to the device attribute group
+ * @scan_attrs:		pointer to the scan element attribute group
+ * @event_attrs:	pointer to the monitor event attribute group
+ * @ad799x_set_scan_mode: function pointer to the device specific mode function
+
+ */
+struct ad799x_chip_info {
+	u8				num_inputs;
+	u8				bits;
+	u16				int_vref_mv;
+	bool				monitor_mode;
+	u16				default_config;
+	struct attribute_group		*dev_attrs;
+	struct attribute_group		*scan_attrs;
+	struct attribute_group		*event_attrs;
+	int (*ad799x_set_scan_mode)	(struct ad799x_state *st,
+					unsigned mask);
+};
+
+struct ad799x_state {
+	struct iio_dev			*indio_dev;
+	struct i2c_client		*client;
+	const struct ad799x_chip_info	*chip_info;
+	struct work_struct		poll_work;
+	struct work_struct		work_thresh;
+	atomic_t			protect_ring;
+	struct iio_trigger		*trig;
+	struct regulator		*reg;
+	s64				last_timestamp;
+	u16				int_vref_mv;
+	unsigned			id;
+	char				*name;
+	u16				config;
+};
+
+/*
+ * TODO: struct ad799x_platform_data needs to go into inlude/linux/iio
+ */
+
+struct ad799x_platform_data {
+	u16				vref_mv;
+};
+
+int ad799x_set_scan_mode(struct ad799x_state *st, unsigned mask);
+
+#ifdef CONFIG_AD799X_RING_BUFFER
+int ad799x_single_channel_from_ring(struct ad799x_state *st, long mask);
+int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev);
+void ad799x_ring_cleanup(struct iio_dev *indio_dev);
+#else /* CONFIG_AD799X_RING_BUFFER */
+int ad799x_single_channel_from_ring(struct ad799x_state *st, long mask)
+{
+	return -EINVAL;
+}
+
+
+static inline int
+ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline void ad799x_ring_cleanup(struct iio_dev *indio_dev)
+{
+}
+#endif /* CONFIG_AD799X_RING_BUFFER */
+#endif /* _AD799X_H_ */

drivers/staging/iio/adc/ad799x_ring.c

+/*
+ * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ * Copyright (C) 2008-2010 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ad799x_ring.c
+ */
+
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/i2c.h>
+#include <linux/bitops.h>
+
+#include "../iio.h"
+#include "../ring_generic.h"
+#include "../ring_sw.h"
+#include "../trigger.h"
+#include "../sysfs.h"
+
+#include "ad799x.h"
+
+int ad799x_single_channel_from_ring(struct ad799x_state *st, long mask)
+{
+	unsigned long numvals;
+	int count = 0, ret;
+	u16 *ring_data;
+	if (!(st->indio_dev->ring->scan_mask & mask)) {
+		ret = -EBUSY;
+		goto error_ret;
+	}
+	numvals = st->indio_dev->ring->scan_count;
+
+	ring_data = kmalloc(numvals*2, GFP_KERNEL);
+	if (ring_data == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	ret = st->indio_dev->ring->access.read_last(st->indio_dev->ring,
+						(u8 *) ring_data);
+	if (ret)
+		goto error_free_ring_data;
+	/* Need a count of channels prior to this one */
+	mask >>= 1;
+	while (mask) {
+		if (mask & st->indio_dev->ring->scan_mask)
+			count++;
+		mask >>= 1;
+	}
+
+	ret = be16_to_cpu(ring_data[count]) & 0xFFF;
+
+error_free_ring_data:
+	kfree(ring_data);
+error_ret:
+	return ret;
+}
+
+/**
+ * ad799x_ring_preenable() setup the parameters of the ring before enabling
+ *
+ * The complex nature of the setting of the nuber of bytes per datum is due
+ * to this driver currently ensuring that the timestamp is stored at an 8
+ * byte boundary.
+ **/
+static int ad799x_ring_preenable(struct iio_dev *indio_dev)
+{
+	struct ad799x_state *st = indio_dev->dev_data;
+	size_t d_size;
+	unsigned long numvals;
+
+	/*
+	 * Need to figure out the current mode based upon the requested
+	 * scan mask in iio_dev
+	 */
+
+	if (st->id == ad7997 || st->id == ad7998)
+		ad799x_set_scan_mode(st, st->indio_dev->ring->scan_mask);
+
+	numvals = st->indio_dev->ring->scan_count;
+
+	if (indio_dev->ring->access.set_bytes_per_datum) {
+		d_size = numvals*2 + sizeof(s64);
+		if (d_size % 8)
+			d_size += 8 - (d_size % 8);
+		indio_dev->ring->access.set_bytes_per_datum(indio_dev->ring,
+							    d_size);
+	}
+
+	return 0;
+}
+
+/**
+ * ad799x_poll_func_th() th of trigger launched polling to ring buffer
+ *
+ * As sampling only occurs on i2c comms occuring, leave timestamping until
+ * then.  Some triggers will generate their own time stamp.  Currently
+ * there is no way of notifying them when no one cares.
+ **/
+static void ad799x_poll_func_th(struct iio_dev *indio_dev, s64 time)
+{
+	struct ad799x_state *st = indio_dev->dev_data;
+
+	schedule_work(&st->poll_work);
+
+	return;
+}
+/**
+ * ad799x_poll_bh_to_ring() bh of trigger launched polling to ring buffer
+ * @work_s:	the work struct through which this was scheduled
+ *
+ * Currently there is no option in this driver to disable the saving of
+ * timestamps within the ring.
+ * I think the one copy of this at a time was to avoid problems if the
+ * trigger was set far too high and the reads then locked up the computer.
+ **/
+static void ad799x_poll_bh_to_ring(struct work_struct *work_s)
+{
+	struct ad799x_state *st = container_of(work_s, struct ad799x_state,
+						  poll_work);
+	struct iio_dev *indio_dev = st->indio_dev;
+	struct iio_sw_ring_buffer *ring = iio_to_sw_ring(indio_dev->ring);
+	s64 time_ns;
+	__u8 *rxbuf;
+	int b_sent;
+	size_t d_size;
+	u8 cmd;
+
+	unsigned long numvals = st->indio_dev->ring->scan_count;
+
+	/* Ensure the timestamp is 8 byte aligned */
+	d_size = numvals*2 + sizeof(s64);
+
+	if (d_size % sizeof(s64))
+		d_size += sizeof(s64) - (d_size % sizeof(s64));
+
+	/* Ensure only one copy of this function running at a time */
+	if (atomic_inc_return(&st->protect_ring) > 1)
+		return;
+
+	/* Monitor mode prevents reading. Whilst not currently implemented
+	 * might as well have this test in here in the meantime as it does
+	 * no harm.
+	 */
+	if (numvals == 0)
+		return;
+
+	rxbuf = kmalloc(d_size,	GFP_KERNEL);
+	if (rxbuf == NULL)
+		return;
+
+	switch (st->id) {
+	case ad7991:
+	case ad7995:
+	case ad7999:
+		cmd = st->config | (st->indio_dev->ring->scan_mask <<
+			AD799X_CHANNEL_SHIFT);
+		break;
+	case ad7992:
+	case ad7993:
+	case ad7994:
+		cmd = (st->indio_dev->ring->scan_mask <<
+			AD799X_CHANNEL_SHIFT) | AD7998_CONV_RES_REG;
+		break;
+	case ad7997:
+	case ad7998:
+		cmd = AD7997_8_READ_SEQUENCE | AD7998_CONV_RES_REG;
+		break;
+	default:
+		cmd = 0;
+	}
+
+	b_sent = i2c_smbus_read_i2c_block_data(st->client,
+			cmd, numvals*2, rxbuf);
+	if (b_sent < 0)
+		goto done;
+
+	time_ns = iio_get_time_ns();
+
+	memcpy(rxbuf + d_size - sizeof(s64), &time_ns, sizeof(time_ns));
+
+	indio_dev->ring->access.store_to(&ring->buf, rxbuf, time_ns);
+done:
+	kfree(rxbuf);
+	atomic_dec(&st->protect_ring);
+}
+
+
+int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
+{
+	struct ad799x_state *st = indio_dev->dev_data;
+	int ret = 0;
+
+	indio_dev->ring = iio_sw_rb_allocate(indio_dev);
+	if (!indio_dev->ring) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	/* Effectively select the ring buffer implementation */
+	iio_ring_sw_register_funcs(&st->indio_dev->ring->access);
+	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
+	if (indio_dev->pollfunc == NULL) {
+		ret = -ENOMEM;
+		goto error_deallocate_sw_rb;
+	}
+	/* Configure the polling function called on trigger interrupts */
+	indio_dev->pollfunc->poll_func_main = &ad799x_poll_func_th;
+	indio_dev->pollfunc->private_data = indio_dev;
+
+	/* Ring buffer functions - here trigger setup related */
+
+	indio_dev->ring->preenable = &ad799x_ring_preenable;
+	indio_dev->ring->postenable = &iio_triggered_ring_postenable;
+	indio_dev->ring->predisable = &iio_triggered_ring_predisable;
+
+	INIT_WORK(&st->poll_work, &ad799x_poll_bh_to_ring);
+
+	indio_dev->ring->scan_el_attrs = st->chip_info->scan_attrs;
+
+	/* Flag that polled ring buffering is possible */
+	indio_dev->modes |= INDIO_RING_TRIGGERED;
+	return 0;
+error_deallocate_sw_rb:
+	iio_sw_rb_free(indio_dev->ring);
+error_ret:
+	return ret;
+}
+
+void ad799x_ring_cleanup(struct iio_dev *indio_dev)
+{
+	/* ensure that the trigger has been detached */
+	if (indio_dev->trig) {
+		iio_put_trigger(indio_dev->trig);
+		iio_trigger_dettach_poll_func(indio_dev->trig,
+					      indio_dev->pollfunc);
+	}
+	kfree(indio_dev->pollfunc);
+	iio_sw_rb_free(indio_dev->ring);
+}